Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Plastics
Engineering & Specialty Polymers
Polyamides
Products in Polyamides
5,366 Products found in Polyamides
Filters
Applications
Suppliers
Polymer Name
Mechanical Properties
Physical Properties
Processing Methods
Products
Brands
Suppliers
Formulations
Documents
Relevance
Evonik
VESTAMID® L1930 BK 9.7503
Polymer Name:
Polyamide 12 (PA 12)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber, Milled Glass Fiber
Additives Included:
Heat Stabilizer
Flexural Modulus:
3596.58 - 3596.58 MPa
Materials Features:
Very Good Heat Resistance, High Strength, Oil Resistant, Chemical Resistant, Dimensional Stability, Semi Crystalline, Low Shrinkage, Heat Stabilized, Grease Resistant, UV Resistant, Good Light Stability, Good Weather Stability, Low Warpage, Good Mechanical Properties, Low Mold Shrinkage, Excellent Rigidity, Electrically Insulating, Low Water Absorption, Fuel Resistant, Good Thermal Stability
Color:
Black
VESTAMID® L1930 BK 9.7503 is a heat-stabilized PA 12 compound reinforced with 30% milled glass fibers. It is suitable for injection molding applications. The reinforcement provides high strength and rigidity to the moldings. Due to the low water absorption of PA 12, parts made from this compound exhibit good dimensional stability and maintain mechanical properties even with changing ambient humidity.
Evonik
TROGAMID® myCX eCO
Polymer Name:
Polyamide (unspecified)
Processing Methods:
Extrusion, Injection Molding, Film Extrusion
Flexural Modulus:
1460.68 - 1460.68 MPa
Materials Features:
High Flow, Low Birefringence, Low Viscosity, Unreinforced, Food Contact Acceptable, Weldable, Hot Water Resistant, Good Light Stability, Good Weather Stability, Excellent Transparency Properties, Good Optical Properties, Detergent Resistant, X-Ray Transparent, Good UV Protection, Good Thermal Stability, Non Corrosive, Good Impact Strength, Hydrolysis Resistant, High Optical Transparency, UV Resistant, Crystalline, Fatigue Resistant, High Gloss
Color:
Natural
TROGAMID® myCX eCO is a microcrystalline transparent polyamide used for manufacturing parts in the optical industry, such as lenses, using the injection molding process. It is produced using production technology that maximizes the potential for CO2 emission savings of up to 50%.
Evonik
VESTAMID® L1670
Polymer Name:
Polyamide 12 (PA 12)
Processing Methods:
Cable Extrusion, Injection Molding, Profile Extrusion, Wire Extrusion, Extrusion
Additives Included:
Lubricant (Unspecified), UV Stabilizer, Processing Aid, Light Stabilizer, Heat Stabilizer
Flexural Modulus:
1350.44 - 1350.44 MPa
Materials Features:
Rodents Resistant, Low Water Absorption, Good Tenacity, Low Coefficient of Friction, Light Stabilized, Very Good Heat Resistance, Lubricated, Chemical Resistant, Low Viscosity, Dimensional Stability, Unreinforced, Semi Crystalline, Heat Stabilized, UV Stabilized, Termites Resistant
Color:
Natural
VESTAMID® L1670 is a low-viscosity polyamide 12 compound that has been specifically developed with heat and light stabilization for the extrusion of thin wire insulations and cable jacketings. Coatings made from VESTAMID® L1670 demonstrate a low coefficient of friction, which greatly facilitates the process of laying cables. This compound is well-suited for profile extrusion and wire and cable extrusion processing techniques.
Evonik
VESTAMID® X7297 BK 9.7507
Polymer Name:
Polyamide 12 (PA 12)
Processing Methods:
Extrusion, Injection Molding, Pipe Extrusion, Tubing Extrusion
Additives Included:
UV Stabilizer, Heat Stabilizer, Plasticizer (Unspecified), Light Stabilizer, Impact Modifier
Flexural Modulus:
399.62 - 399.62 MPa
Materials Features:
Low Coefficient of Friction, Flexible, Oil Resistant, High Viscosity, Unreinforced, Impact Modified, Heat Stabilized, UV Stabilized, Good Light Stability, Good Weather Stability, Electrically Insulating, Fuel Resistant, Good Thermal Stability, Good Impact Strength, Light Stabilized, Very Good Heat Resistance, Chemical Resistant, Easier Processing, Semi Crystalline, Plasticized, Low Temperature Impact Resistance, UV Resistant, Low Moisture Absorption, Impact Resistance
Color:
Black
VESTAMID® X7297 BK 9.7507 is a plasticized polyamide 12 compound with a heat and light stabilizer for the extrusion of flexible tubing and hoses, especially for automotive applications. It is characterized by easy processing and high impact strength at low temperatures.
Evonik
VESTAMID® D18
Polymer Name:
Polyamide 612 (PA 612)
Processing Methods:
Extrusion, Injection Molding, Profile Extrusion
Flexural Modulus:
2087.67 - 2087.67 MPa
Materials Features:
Translucent, Medium Viscosity, Unreinforced, Dimensional Stability, Low Water Absorption, Food Contact Acceptable
VESTAMID® D18 is a medium-viscosity polyamide 612 compound that is specifically designed for extrusion and injection molding processes. It is commonly used for applications such as monofilaments, including toothbrush bristles. The material exhibits low water absorption, which contributes to the exceptional dimensional stability of components even when exposed to varying ambient humidity conditions. VESTAMID® D18 is suitable for profile extrusion processing techniques.
Evonik
VESTAMID® L1723 BK 9.7624
Polymer Name:
Polyamide 12 (PA 12)
Processing Methods:
Injection Molding
Additives Included:
UV Stabilizer, Light Stabilizer, Release agent, Heat Stabilizer, Plasticizer (Unspecified), Lubricant (Unspecified)
Materials Features:
Low Water Absorption, Good Weather Stability, Low Coefficient of Friction, Plasticized, Low Viscosity, Heat Stabilized, UV Stabilized, Dimensional Stability, Good Tenacity, Semi Crystalline, Chemical Resistant, Lubricated, Light Stabilized
VESTAMID® L1723 BK 9.7624 is a low-viscosity, plasticized PA12 resin suitable for injection molding. It has been developed specifically for the production of strip clips and cable ties. The parts made from this resin maintain their dimensions in environments with varying humidity levels while possessing high tenacity, a low coefficient of friction, and good chemical resistance.
Evonik
VESTAMID® NRG 1001
Polymer Name:
Polyamide 12 (PA 12)
Chemical Family:
Polyamides
Additives Included:
Heat Stabilizer, Plasticizer (Unspecified), Light Stabilizer, Impact Modifier
Processing Methods:
Injection Molding, Pipe Extrusion, Profile Extrusion, Tubing Extrusion, Extrusion
Materials Features:
Impact Resistance, Good Weather Stability, Good Impact Strength, Heat Stabilized, Unreinforced, Hydrolysis Resistant, Plasticized, Low Moisture Absorption, Chemical Resistant, Impact Modified, High Viscosity, Flexible, UV Resistant, Hot Water Resistant, Dimensional Stability, Easier Processing, Fuel Resistant, Very Good Heat Resistance, Semi Crystalline, Light Stabilized, Good Light Stability, Oil Resistant, Low Coefficient of Friction
Color:
Natural
VESTAMID® NRG 1001 is a high-viscosity, plasticized, and impact-modified PA 12 compound with heat and light stabilizers for the extrusion of flexible tubing and hoses, particularly for oil and petrochemical applications. It offers easy processing and good dimensional control during pipe extrusion, especially for large pipe diameters.
Evonik
VESTAMID® LX9008 BK 9.7504
Polymer Name:
Polyamide 12 (PA 12)
Processing Methods:
Pipe Extrusion, Extrusion, Tubing Extrusion, Injection Molding, Profile Extrusion
Additives Included:
Heat Stabilizer
Flexural Modulus:
1191.97 - 1191.97 MPa
Materials Features:
Flexible, Very Good Heat Resistance, Oil Resistant, High Viscosity, Dimensional Stability, Unreinforced, Heat Stabilized, UV Resistant, Good Light Stability, Good Weather Stability, Low Moisture Absorption, Electrically Insulating, Fuel Resistant, Good Thermal Stability
Color:
Black
VESTAMID® LX9008 BK 9.7504 is a plasticizer-free polyamide 12 compound renowned for its exceptional long-term resistance under thermal load. This compound is specifically designed for the production of flexible tubes exposed to higher temperatures, making it ideal for applications in the engine compartment of motor vehicles. When utilized as diesel fuel lines, VESTAMID® LX9008 BK 9.7504 demonstrates significant advantages over standard grades, as evident in storage tests with diesel fuel. With low moisture absorption, this material maintains the dimensions and properties of finished parts even in changing ambient conditions. However, when using VESTAMID® LX9008 BK 9.7504 for fuel lines, certain prerequisites must be considered. Experience the outstanding long-term thermal resistance and reliability of VESTAMID® LX9008 BK 9.7504 for your demanding applications.
Evonik
VESTAMID® Terra DS16 NC
Polymer Name:
Polyamide 1010 (PA 1010)
Processing Methods:
Extrusion, Injection Molding
Additives Included:
Heat Stabilizer
Materials Features:
Renewable Resource Content, Medium Viscosity, Heat Stabilized, Dimensional Stability, High Melting Point, Semi Crystalline, Chemical Resistant, High Heat Deflection Temperature, Excellent Transparency Properties, Good Mechanical Properties, Low Water Absorption
VESTAMID® Terra DS16 NC is a medium-viscosity PA 1010 basic polymer. It is semi-crystalline, which contributes to its high mechanical resistance and chemical stability. It has low water absorption and excellent dimensional stability. VESTAMID® Terra DS16 is suitable for manufacturing films with good transparency.
Evonik
VESTAMID® L1833 BK 9.7623
Polymer Name:
Polyamide 12 (PA 12)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Additives Included:
Heat Stabilizer
Flexural Modulus:
4995.25 - 4995.25 MPa
Materials Features:
Oil Resistant, Shorter Cycle Time, Excellent Mold Release, Heat Stabilized, UV Resistant, Good Light Stability, Good Weather Stability, Medium Viscosity, Electrically Insulating, Fuel Resistant, Good Thermal Stability
Color:
Black
VESTAMID® L1833 BK 9.7623 is a 23% glass fiber-reinforced, easily demoldable, and heat-stabilized polyamide 12 compound. This compound is specifically formulated to provide efficient production of injection molded parts with short cycle times, thanks to its excellent mold release properties. VESTAMID® L1833 BK 9.7623 is supplied as cylindrical granules, conveniently packaged in moisture-proof bags, ensuring optimal storage conditions. Experience the reliability and performance of VESTAMID® L1833 BK 9.7623 in your injection molding applications. This compound, with its glass fiber reinforcement, offers enhanced strength and rigidity, while its demolding characteristics and heat stability contribute to efficient production. Choose VESTAMID® L1833 BK 9.7623 for its exceptional properties, ease of processing, and suitability for a wide range of injection molded parts.
Evonik
VESTAMID® D16
Polymer Name:
Polyamide 612 (PA 612)
Processing Methods:
Extrusion, Injection Molding, Profile Extrusion
Flexural Modulus:
1977.43 - 1977.43 MPa
Materials Features:
Translucent, Medium Viscosity, Unreinforced, Dimensional Stability, Low Water Absorption, Food Contact Acceptable, Chemical Resistant
VESTAMID® D16 is a medium-viscosity Polyamide 612 compound for extrusion and injection molding applications such as monofilaments (e.g., toothbrush bristles). The material based on PA612 absorbs only small amounts of water, resulting in excellent dimensional stability of components under changing ambient humidity.
Evonik
VESTAMID® LX9001 BK 9.7504
Polymer Name:
Polyamide 12 (PA 12)
Processing Methods:
Extrusion, Injection Molding, Extrusion Coating, Coating
Additives Included:
Heat Stabilizer, Light Stabilizer, Bonding Agent
Flexural Modulus:
1701.83 - 1701.83 MPa
Materials Features:
Oil Resistant, High Viscosity, Heat Stabilized, Good Light Stability, Good Weather Stability, Electrically Insulating, Low Water Absorption, Fuel Resistant, Good Thermal Stability, Good Impact Strength, Light Stabilized, Very Good Heat Resistance, Good Adhesion, Chemical Resistant, Good Abrasion Resistance, Dimensional Stability, UV Resistant, Excellent Light Stability, Corrosion Resistant
Color:
Black
VESTAMID® LX9001 BK 9.7504 is a heat-stabilized and light-resistant PA 12 compound specifically developed for the extrusion coating of steel tubes. This compound enhances the corrosion resistance of steel tubes through its exceptional impact strength, abrasion resistance, and chemical resistance. The excellent adhesion between the steel and the properly applied VESTAMID® LX9001 BK 9.7504 further contributes to this increased corrosion resistance. Additionally, VESTAMID® LX9001 BK 9.7504 offers the advantages of low water absorption, good dimensional stability, and consistent properties even in changing ambient humidity. Supplied as cylindrical pellets in moisture-proof packaging, they are ready for seamless processing. Experience the exceptional qualities of VESTAMID® LX9001 BK 9.7504 and enhance the performance and durability of steel tubes with its reliable coating solution.
Evonik
VESTAMID® X7393 NC
Polymer Name:
Polyamide 12 (PA 12)
Processing Methods:
Extrusion, Injection Molding
Additives Included:
Heat Stabilizer, Plasticizer (Unspecified), Light Stabilizer, Impact Modifier
Flexural Modulus:
499.525 - 499.525 MPa
Materials Features:
Good Light Stability, Impact Modified, Good Weather Stability, Low Coefficient of Friction, Electrically Insulating, UV Resistant, Low Temperature Impact Resistance, High Viscosity, Unreinforced, Flexible, Low Moisture Absorption, Plasticized, Oil Resistant, Heat Stabilized, Good Thermal Stability, Impact Resistance, Semi Rigid, Chemical Resistant, High Pressure Resistance, Light Stabilized, Fuel Resistant
VESTAMID® X7393 NC is a high-viscosity, plasticized, impact-modified, heat- and light-stabilized polyamide 12 compound used for flexible tubing and hoses in the automobile industry. Parts made from VESTAMID® X7393 NC exhibit optimized cold temperature impact resistance and increased burst pressure resistance in the extrusion of semi-rigid tubing. Additionally, it offers an exceptional low coefficient of friction and good chemical resistance.
Evonik
VESTAMID® NRG 2101 YE
Polymer Name:
Polyamide 12 (PA 12)
Chemical Family:
Polyamides
Additives Included:
UV Stabilizer, Heat Stabilizer, Light Stabilizer
Processing Methods:
Injection Molding, Pipe Extrusion, Profile Extrusion, Tubing Extrusion, Extrusion
Materials Features:
Excellent Toughness, Good Weather Stability, Hydrocarbon Resistant, Good Impact Strength, Heat Stabilized, Cost Effective, High Performance, Unreinforced, Corrosion Resistant, UV Stabilized, High Melt Strength, Hydrolysis Resistant, Good Aging Behavior, Chemical Resistant, Good Environmental Stress Crack Resistance (ESCR), Good Thermal Stability, High Viscosity, Fatigue Resistant, Crack Resistant, UV Resistant, Hot Water Resistant, Weldable, Fuel Resistant, Very Good Heat Resistance, High Molecular Weight, Semi Crystalline, Grease Resistant, Ozone Resistant, Light Stabilized, Good Light Stability, Oil Resistant, Durable, Electrically Insulating, Solvent Resistant
Color:
Yellow
VESTAMID® NRG 2101 YE is a high-molecular-grade PA-12 material developed by Evonik. It is designed for use in thermoplastic piping systems at higher operating pressures and larger diameters, replacing metallic piping systems in a safe and cost-effective manner. It offers superior performance characteristics.
Evonik
VESTAMID® L2124 BK 9.7507
Polymer Name:
Polyamide 12 (PA 12)
Processing Methods:
Extrusion, Injection Molding, Pipe Extrusion, Tubing Extrusion, Profile Extrusion
Additives Included:
UV Stabilizer, Processing Aid, Heat Stabilizer, Plasticizer (Unspecified), Light Stabilizer, Lubricant (Unspecified)
Flexural Modulus:
399.62 - 399.62 MPa
Materials Features:
Low Coefficient of Friction, Flexible, Oil Resistant, Lubricated, High Viscosity, Unreinforced, Heat Stabilized, UV Stabilized, Good Light Stability, Good Weather Stability, Electrically Insulating, Fuel Resistant, Good Thermal Stability, Good Impact Strength, Light Stabilized, Very Good Heat Resistance, High Melt Viscosity, Chemical Resistant, Dimensional Stability, Semi Crystalline, Plasticized, UV Resistant, Low Moisture Absorption
Color:
Black
VESTAMID® L2124 BK 9.7507 is a plasticized polyamide 12 compound specially formulated for the extrusion of flexible tubing and hoses in oil and petrochemical applications. This heat- and light-stabilized compound complies with DIN 73-378, Type: PA 12-PHL, for tubing. Its low moisture absorption ensures minimal variation in properties with changing humidity. Manufactured with exceptional impact strength, a low coefficient of friction, and good chemical resistance, parts made from VESTAMID® L2124 BK 9.7507 exhibit outstanding performance. With its high melt viscosity and precise dimensional control during pipe extrusion, this semi-crystalline material provides reliability and ease of processing. Supplied as cylindrical granules in moisture-proof bags, VESTAMID® L2124 BK 9.7507 is ready for seamless integration into your production process.
Evonik
TROGAMID® CX7323 NC
Polymer Name:
Polyamide 12 (PA 12)
Processing Methods:
Extrusion, Injection Molding, Film Extrusion, Profile Extrusion, Sheet Extrusion
Additives Included:
UV Stabilizer, Light Stabilizer
Flexural Modulus:
1701.83 - 1701.83 MPa
Materials Features:
Oil Resistant, Unreinforced, Food Contact Acceptable, Wear Resistant, Hot Water Resistant, UV Stabilized, Good Light Stability, Good Weather Stability, Excellent Transparency Properties, Good Optical Properties, Electrically Insulating, Fuel Resistant, Good Thermal Stability, Light Stabilized, Drinking Water Contact Acceptable, Hydrolysis Resistant, High Optical Transparency, UV Resistant, Crack Resistant, Good Environmental Stress Crack Resistance (ESCR), Medium Viscosity, Crystalline, Fatigue Resistant, High Gloss, General Purpose, Abrasion Resistant
Color:
Natural
TROGAMID® CX7323 NC is a specialized polyamide designed for injection molding applications. This microcrystalline transparent polyamide exhibits exceptional transparency to the human eye due to its extremely small crystallite size, which prevents the scattering of visible light. The material's crystalline structure also imparts outstanding crack resistance, ensuring durability and reliability in various manufacturing processes. TROGAMID® CX7323 is conveniently supplied as spherical pellets, packaged in polyethylene. This product allows for a certain degree of flexibility in molds and processing, enabling adjustments to accommodate specific cavity requirements or optimize the overall manufacturing process. With its unique properties, TROGAMID® CX7323 offers a reliable solution for the production of transparent parts through injection molding.
Evonik
VESTAMID® DX9304 BK E70238
Polymer Name:
Polyamide 612 (PA 612)
Processing Methods:
Extrusion, Injection Molding, Profile Extrusion
Additives Included:
Light Stabilizer, Impact Modifier, Heat Stabilizer
Flexural Modulus:
1818.96 - 1818.96 MPa
Materials Features:
Good Impact Strength, Light Stabilized, Very Good Heat Resistance, Oil Resistant, Chemical Resistant, High Viscosity, Dimensional Stability, Unreinforced, Impact Modified, Heat Stabilized, UV Resistant, Good Light Stability, Good Weather Stability, Low Moisture Absorption, Impact Resistance, Heat Resistance, Electrically Insulating, Fuel Resistant, Good Thermal Stability
Color:
Black
VESTAMID® DX9304 BK E70238 is an extrusion compound specifically developed for the manufacturing of tubing systems that require higher heat resistance. With a melting point approximately 35 °C higher than PA 11 and PA 12 compounds, VESTAMID® DX9304 BK E70238 allows for elevated temperatures during use. This compound is particularly well-suited for extruding tubing systems that are exposed to high burst pressures and high service temperatures, such as hydraulic clutch lines. Thanks to its low moisture absorption, the dimensions and properties of parts remain largely unaffected by ambient conditions. Choose VESTAMID® DX9304 BK E70238 for its exceptional heat resistance, reliability, and ability to meet the demanding requirements of tubing systems.
Evonik
VESTAMID® X7167
Polymer Name:
Polyamide 12 (PA 12)
Processing Methods:
Extrusion, Injection Molding, Profile Extrusion
Additives Included:
Flame Retardant, Heat Stabilizer, Lubricant (Unspecified)
Flexural Modulus:
1756.95 - 1756.95 MPa
Materials Features:
Very Good Heat Resistance, Lubricated, High Viscosity, Heat Stabilized, Self Extinguishing, General Purpose, Good Thermal Stability, Flame Retardant, Flame Resistant
Color:
Natural
VESTAMID® X7167 NC is a high-quality polyamide 12 (PA12) compound formulated for exceptional heat stability and flame retardancy. This compound incorporates a non-migrating flame retardant that is free of halogens and phosphorous, making it an ideal choice for interior parts in aircraft, railways, and ships. VESTAMID® X7167 NC meets the stringent requirements of FAR 25.853 or ABD 0031, ensuring compliance and safety in these demanding applications. This versatile resin can be processed through extrusion or injection molding methods. However, it is important to note that the melt temperature should not exceed 260 °C to maintain the effectiveness of the flame retardant. We recommend melt temperatures within the range of 210–230 °C for optimal performance. VESTAMID® X7167 NC is conveniently supplied as cylindrical pellets, packaged in moisture-proof bags, ready for immediate use. Trust VESTAMID® X7167 NC for reliable and flame-resistant solutions in interior component manufacturing.
Evonik
VESTAMID® LX9112 BK
Polymer Name:
Polyamide 12 (PA 12)
Processing Methods:
Extrusion, Injection Molding, Extrusion Coating, Coating
Additives Included:
Conductive Agent, Heat Stabilizer, Light Stabilizer, Bonding Agent
Flexural Modulus:
1901.64 - 1901.64 MPa
Materials Features:
Oil Resistant, Anti-Static, Unreinforced, Heat Stabilized, Conductive, Good Extrusion Properties, Good Light Stability, Good Weather Stability, Fuel Resistant, Good Thermal Stability, Electrically Conductive, Good Impact Strength, Light Stabilized, Very Good Heat Resistance, Low Melt Viscosity, Chemical Resistant, Good Abrasion Resistance, ESD Protection, UV Resistant, Excellent Light Stability, Corrosion Resistant
Color:
Black
VESTAMID® LX9112 BK is a heat-stabilized, conductive polyamide 12 compound specifically developed for the pore-free extrusion coating of steel tubing. It stands out from commonly used conductive extrusion compounds due to its significantly lower melt viscosity and outstanding extrusion characteristics, even in very thin coatings.
Evonik
VESTAMID® NRG 3001 NC
Polymer Name:
Polyamide 12 (PA 12)
Chemical Family:
Polyamides
Additives Included:
Light Stabilizer, Heat Stabilizer
Processing Methods:
Injection Molding, Extrusion, Pipe Extrusion
Materials Features:
Excellent Compatibility, Good Weather Stability, Good Thermal Stability, High Viscosity, UV Resistant, Hot Water Resistant, Dimensional Stability, Easier Processing, Fuel Resistant, Heat Stabilized, Very Good Heat Resistance, Unreinforced, Light Stabilized, Good Light Stability, Oil Resistant, Hydrolysis Resistant
Color:
Natural
VESTAMID® NRG 3001 NC is a polyamide 12 compound specifically developed for the manufacturing of hydrocarbon transport piping systems and liners. This material offers easy processing and excellent dimensional control during pipe extrusion, particularly for large diameter pipes. VESTAMID® NRG 3001 demonstrates exceptional compatibility with hydrocarbons such as crude oil, as well as oilfield chemicals like paraffin inhibitors. As a result, it delivers high dimensional stability and maintains unaffected properties for parts in contact with these substances. Experience the reliability and performance of VESTAMID® NRG 3001 in your hydrocarbon transport applications. Choose VESTAMID® NRG 3001 for its superior properties, easy processing, and excellent dimensional control, ensuring optimal performance and durability in your piping systems and liners.
Evonik
VESTAMID® L2140 BK 9.7504
Polymer Name:
Polyamide 12 (PA 12)
Processing Methods:
Extrusion, Injection Molding, Profile Extrusion
Additives Included:
UV Stabilizer, Heat Stabilizer, Light Stabilizer, Lubricant (Unspecified)
Flexural Modulus:
1570.92 - 1570.92 MPa
Materials Features:
Low Coefficient of Friction, Oil Resistant, Lubricated, High Viscosity, Unreinforced, Heat Stabilized, UV Stabilized, Good Light Stability, Good Weather Stability, Electrically Insulating, Fuel Resistant, Good Thermal Stability, Good Impact Strength, Light Stabilized, Very Good Heat Resistance, Chemical Resistant, Semi Crystalline, UV Resistant, Low Moisture Absorption
Color:
Black
VESTAMID® L2140 BK 9.7504 is a heat- and light-stabilized polyamide 12 compound designed for extrusion of tubing and semi-finished products such as fuel lines. The properties of this material are minimally affected by changing humidity due to its low moisture absorption. Parts made from this semi-crystalline material exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance.
Evonik
VESTAMID® NRG 2901 BK
Polymer Name:
Polyamide 12 (PA 12)
Chemical Family:
Polyamides
Additives Included:
Heat Stabilizer, Nucleating Agent
Processing Methods:
Injection Molding, Pipe Extrusion, Tubing Extrusion, Extrusion
Materials Features:
Good Weather Stability, Low Shrinkage, Good Impact Strength, Heat Stabilized, High Performance, Unreinforced, Good Abrasion Resistance, Excellent Mold Release, Hydrolysis Resistant, Low Moisture Absorption, Chemical Resistant, Nucleated, Good Thermal Stability, High Viscosity, UV Resistant, Hot Water Resistant, Fuel Resistant, Very Good Heat Resistance, Semi Crystalline, Good Light Stability, Oil Resistant, Low Coefficient of Friction, Low Friction, Shorter Cycle Time
Color:
Black
VESTAMID® NRG 2901 BK is a high-viscosity, heat-stabilized compound with exceptional mold release properties. It is nucleated to reduce cycle time and shrinkage of molded parts. It is commonly used for gas pipes and fittings, with a proven record of safe and reliable performance in demanding applications, including fuel lines in passenger cars, air brake tubing in trucks, and offshore applications.
Evonik
VESTAMID® X7293
Polymer Name:
Polyamide 12 (PA 12)
Processing Methods:
Extrusion, Injection Molding, Pipe Extrusion, Tubing Extrusion, Profile Extrusion
Additives Included:
Heat Stabilizer, Plasticizer (Unspecified), Light Stabilizer, Impact Modifier, Lubricant (Unspecified)
Flexural Modulus:
399.62 - 399.62 MPa
Materials Features:
Low Coefficient of Friction, Flexible, Oil Resistant, Lubricated, High Viscosity, Unreinforced, Impact Modified, Heat Stabilized, Good Light Stability, Good Weather Stability, Electrically Insulating, Fuel Resistant, Good Thermal Stability, Good Impact Strength, Light Stabilized, Very Good Heat Resistance, Chemical Resistant, Easier Processing, Semi Crystalline, Plasticized, Low Temperature Impact Resistance, UV Resistant, Low Moisture Absorption, Impact Resistance
Color:
Natural
VESTAMID® X7293 is a plasticized polyamide 12 compound with a heat and light stabilizer for the extrusion of flexible tubing and hoses, especially for automotive applications. It is known for its easy processing and high impact strength at low temperatures.
Evonik
VESTAMID® X7293 BK 9.7507
Polymer Name:
Polyamide 12 (PA 12)
Processing Methods:
Extrusion, Injection Molding, Pipe Extrusion, Tubing Extrusion, Profile Extrusion
Additives Included:
Heat Stabilizer, Plasticizer (Unspecified), Light Stabilizer, Impact Modifier, Lubricant (Unspecified)
Flexural Modulus:
399.62 - 399.62 MPa
Materials Features:
Low Coefficient of Friction, Flexible, Oil Resistant, Lubricated, High Viscosity, Unreinforced, Impact Modified, Heat Stabilized, Good Light Stability, Good Weather Stability, Electrically Insulating, Fuel Resistant, Good Thermal Stability, Good Impact Strength, Light Stabilized, Very Good Heat Resistance, Chemical Resistant, Easier Processing, Semi Crystalline, Plasticized, Low Temperature Impact Resistance, UV Resistant, Low Moisture Absorption, Impact Resistance
Color:
Black
VESTAMID® X7293 BK 9.7507 is a plasticized polyamide 12 compound formulated with heat and light stabilizers for the extrusion of flexible tubing and hoses, particularly suited for automotive applications. This compound conforms to standards such as DIN 73378 (PA 12-HIPHL, Type 1), ISO/DIN 7628-1 (PA 12-HIPEHL, Type 1), and SAE J844. VESTAMID® X7293 BK 9.7507 offers easy processing and high impact strength at low temperatures. Its low moisture absorption ensures minimal variation in properties with changing humidity. Manufactured from this semicrystalline material, parts exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance. Supplied as cylindrical granules in moisture-proof bags, VESTAMID® X7293 BK 9.7507 is conveniently ready for use. Choose VESTAMID® X7293 BK 9.7507 for its reliability and superior performance in extrusion applications, ensuring excellent results for your automotive tubing and hose needs.
Evonik
VESTAMID® L2124
Polymer Name:
Polyamide 12 (PA 12)
Processing Methods:
Extrusion, Injection Molding, Pipe Extrusion, Tubing Extrusion, Profile Extrusion
Additives Included:
UV Stabilizer, Processing Aid, Heat Stabilizer, Plasticizer (Unspecified), Light Stabilizer, Lubricant (Unspecified)
Flexural Modulus:
399.62 - 399.62 MPa
Materials Features:
Low Coefficient of Friction, Flexible, Oil Resistant, Lubricated, High Viscosity, Unreinforced, Heat Stabilized, UV Stabilized, Electrically Insulating, Fuel Resistant, Good Thermal Stability, Good Impact Strength, Light Stabilized, Very Good Heat Resistance, High Melt Viscosity, Chemical Resistant, Dimensional Stability, Semi Crystalline, Plasticized, Low Moisture Absorption
Color:
Natural
VESTAMID® L2124 NC is a plasticized, heat- and light-stabilized polyamide 12 compound specially designed for the extrusion of flexible tubing and hoses, particularly for oil and petrochemical applications. This compound conforms to DIN 73 378, Type: PA 12-PHL, for tubing. VESTAMID® L2124 NC is characterized by its high melt viscosity and excellent dimensional control during pipe extrusion. Compounds based on PA12 demonstrate minimal variation in properties with changing humidity due to their low moisture absorption. Parts made from this semi-crystalline material exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance. Choose VESTAMID® L2124 NC for its reliable performance, versatility, and exceptional properties, ensuring the durability and reliability of your flexible tubing and hose applications.
Evonik
VESTAMID® DX9330
Polymer Name:
Polyamide 612 (PA 612)
Processing Methods:
Extrusion, Injection Molding, Filament Extrusion
Flexural Modulus:
2060.11 - 2060.11 MPa
Materials Features:
Moderate Water Absorption, Medium Viscosity, Pigmentable, Dimensional Stability, Unreinforced, Easier Processing, Food Contact Acceptable
Color:
Natural
VESTAMID® DX9330 NC is a PA 612 base polymer that does not contain any stabilizers or additives. This versatile material is suitable for both extrusion and injection molding applications. VESTAMID® DX9330 NC is primarily used in special cases where additives are not preferred or processing aids are unnecessary, such as filament extrusion. With its optimal balance of amino and carboxyl end groups, this material offers ease of processing and dyeability. PA 612 is known for its moderate water absorption, good dimensional stability, and consistent properties in varying ambient humidity conditions. VESTAMID® DX9330 NC is supplied as cylindrical granules in moisture-proof bags, ready for seamless processing. Maintain a processing temperature range of 250°C to 290°C for optimal results. Choose VESTAMID® DX9330 NC for its reliability, versatility, and ease of processing in your specialized applications.
Evonik
VESTAMID® LX9013 BK 9.7507
Polymer Name:
Polyamide 12 (PA 12)
Processing Methods:
Extrusion, Injection Molding, Pipe Extrusion, Tubing Extrusion, Profile Extrusion
Additives Included:
Heat Stabilizer, Plasticizer (Unspecified), Impact Modifier
Flexural Modulus:
399.62 - 399.62 MPa
Materials Features:
Flexible, Oil Resistant, High Viscosity, Unreinforced, Impact Modified, Heat Stabilized, Good Light Stability, Good Weather Stability, Electrically Insulating, Fuel Resistant, Good Thermal Stability, Good Impact Strength, Very Good Heat Resistance, Chemical Resistant, Dimensional Stability, Plasticized, Low Temperature Impact Resistance, UV Resistant, Low Moisture Absorption, Impact Resistance
Color:
Black
VESTAMID® LX9013 BK 9.7507 is a plasticized polyamide 12 compound with exceptionally high long-term resistance under thermal load. It has low moisture absorption, resulting in minimal dimensional and property changes under changing ambient conditions. Extruded tubes made from VESTAMID® LX9013 BK 9.7507 are impact-resistant, even at low temperatures. This material is suitable for producing flexible tubes that are consistently exposed to higher temperatures, such as in the engine compartment of motor vehicles.
Evonik
VESTAMID® DX9303 BK E70288
Polymer Name:
Polyamide 612 (PA 612)
Processing Methods:
Extrusion, Injection Molding, Pipe Extrusion, Tubing Extrusion
Additives Included:
Heat Stabilizer, Plasticizer (Unspecified), Light Stabilizer, Impact Modifier
Flexural Modulus:
847.47 - 847.47 MPa
Materials Features:
Oil Resistant, High Viscosity, Unreinforced, Impact Modified, Heat Stabilized, Good Light Stability, Good Weather Stability, Electrically Insulating, Fuel Resistant, Good Thermal Stability, Good Impact Strength, Light Stabilized, Very Good Heat Resistance, Dimensional Stability, Plasticized, UV Resistant, Low Moisture Absorption, Impact Resistance, Heat Resistance
Color:
Black
VESTAMID® DX9303 BK E70288 is a PA 612 extrusion compound developed for tubing systems with higher heat resistance requirements. Its melting point is approximately 35°C higher than that of PA 11 and PA 12 compounds, allowing for higher peak temperatures during use. This compound meets the increased demands resulting from higher temperatures in the engine compartment.
Evonik
VESTAMID® NRG 5901 BK
Polymer Name:
Polyamide 12 (PA 12)
Chemical Family:
Polyamides
Additives Included:
UV Stabilizer
Processing Methods:
Injection Molding, Pipe Extrusion, Profile Extrusion, Tubing Extrusion, Extrusion
Materials Features:
Excellent Toughness, Good Weather Stability, Hydrocarbon Resistant, Abrasion Resistant, High Temperature Application, Good Barrier Properties, Cost Effective, High Performance, Unreinforced, Corrosion Resistant, High Pressure Applications, UV Stabilized, Light Weight, Hydrolysis Resistant, Chemical Resistant, Good UV Resistance, Outdoor Durability, Good Thermal Stability, High Viscosity, Fatigue Resistant, Crack Resistant, UV Resistant, Hot Water Resistant, Weldable, Fuel Resistant, High Molecular Weight, Good Light Stability, Oil Resistant, Durable, Wear Resistant, Low Coefficient of Friction
Color:
Black
VESTAMID® NRG 5901 BK is a high-molecular-weight PA-12 material developed by Evonik. This exceptional material offers superior performance characteristics, making it an ideal choice for expanding the use of thermoplastic piping systems. With its ability to handle higher operating pressures and larger diameters, VESTAMID® NRG 5901 BK provides a safe and cost-effective alternative to metallic piping systems. In addition to extending the operating pressure limits of thermoplastic piping systems, it offers numerous benefits and, in many cases, outperforms conventional PE piping systems. Experience the reliability, durability, and enhanced performance of VESTAMID® NRG 5901 BK in your piping applications. Choose VESTAMID® NRG 5901 BK for its superior properties and cost-effective solution, ensuring the safe and efficient operation of your thermoplastic piping systems.
Evonik
VESTAMID® L2123 BK 9.7507
Polymer Name:
Polyamide 12 (PA 12)
Processing Methods:
Extrusion, Injection Molding, Pipe Extrusion, Tubing Extrusion
Additives Included:
UV Stabilizer, Processing Aid, Plasticizer (Unspecified), Light Stabilizer, Impact Modifier, Lubricant (Unspecified)
Materials Features:
Low Coefficient of Friction, Flexible, Oil Resistant, Lubricated, High Viscosity, Unreinforced, Impact Modified, UV Stabilized, Good Light Stability, Good Weather Stability, Electrically Insulating, Fuel Resistant, Good Thermal Stability, Good Impact Strength, Light Stabilized, Very Good Heat Resistance, High Melt Viscosity, Chemical Resistant, Dimensional Stability, Semi Crystalline, Plasticized, Low Temperature Impact Resistance, UV Resistant, Low Moisture Absorption, Impact Resistance
Color:
Black
VESTAMID® L2123 BK 9.7507 is a plasticized and high-viscosity polyamide 12 compound designed for the extrusion of flexible tubing and hoses, particularly in the automotive industry. This compound complies with DIN 73 378, Type: PA 12-PHL, for tubing. Thanks to its low moisture absorption, compounds based on PA 12 demonstrate minimal variation in properties with changing humidity. Parts made from this semi-crystalline material exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance. VESTAMID® L2123 BK 9.7507 features a high melt viscosity, optimized cold temperature impact resistance, and precise dimensional control during pipe extrusion. Supplied as cylindrical granules in moisture-proof bags, they are ready for seamless processing. Choose VESTAMID® L2123 BK 9.7507 for its reliability, high-viscosity performance, and excellent properties in your flexible tubing and hose extrusion applications.
Evonik
VESTAMID® eCO LX9039 BBM100
Polymer Name:
Polyamide 12 (PA 12)
Flexural Modulus:
1412.45 - 1412.45 MPa
Materials Features:
Unreinforced, Medium Viscosity
Color:
Natural
VESTAMID® eCO LX9039 BBM100 is a unique polyamide 12 product offered by Evonik. It is an unmodified polyamide 12 with medium viscosity and does not contain any stabilizers or processing aids. This specific formulation is typically utilized in special circumstances where the absence of additives is desired or the presence of processing aids could cause interference. The "eCO" in its name reflects Evonik's commitment to reducing CO2 emissions by utilizing renewable or circular feedstocks through a mass-balance approach. VESTAMID® eCO LX9039 BBM100 provides a reliable solution for applications requiring a pure polyamide 12 material without any additional additives, catering to specific requirements in various industries.
Evonik
VESTAMID® X7393 BK 9.7507
Polymer Name:
Polyamide 12 (PA 12)
Processing Methods:
Extrusion, Injection Molding, Profile Extrusion
Additives Included:
UV Stabilizer, Heat Stabilizer, Plasticizer (Unspecified), Light Stabilizer, Impact Modifier, Lubricant (Unspecified)
Flexural Modulus:
716.56 - 716.56 MPa
Materials Features:
Good Light Stability, Impact Modified, Good Weather Stability, Low Coefficient of Friction, Electrically Insulating, UV Resistant, Low Temperature Impact Resistance, Very Good Heat Resistance, High Viscosity, Unreinforced, Good Impact Strength, Flexible, Low Moisture Absorption, Plasticized, Oil Resistant, Heat Stabilized, Good Thermal Stability, UV Stabilized, Impact Resistance, Semi Rigid, Chemical Resistant, High Pressure Resistance, Lubricated, Light Stabilized, Fuel Resistant
VESTAMID® X7393 BK 9.7507 is a high-viscosity, plasticized, impact-modified, heat- and light-stabilized polyamide 12 compound for flexible tubing and hoses in the automobile industry. Parts made from VESTAMID® X7393 BK 9.7507 exhibit optimized cold temperature impact resistance, increased burst pressure resistance, a low coefficient of friction, and good chemical resistance.
Mitsubishi Chemical Group Corporation
KyronMAX® S-2240
Polymer Name:
Polyamide 66 (PA 66)
Processing Methods:
Injection Molding
Flexural Modulus:
38000.0 - 38000.0 MPa
KyronMAX® S-2240 is a high-performance polymer that combines the excellent strength and toughness of nylon with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength, stiffness, and impact resistance are required.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessNylon base: provides excellent toughness and impact resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh impact resistance: able to withstand high impact applications.Benefits:Improved strength and stiffness of components in demanding environmentsIncreased resistance to wear and tear and impactEnhanced performance and durability of your productsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industriesComponents that require high strength and stiffness, such as gears, bearing components, and bushingsIndustrial and manufacturing equipment where high strength, stiffness, and impact resistance is neededHigh impact applications, such as aerospace, automotive and heavy equipment components.KyronMAX® S-2240 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries.Please note that no stock shapes are offered
Mitsubishi Chemical Group Corporation
KyronMAX® S-4340
Polymer Name:
Polyphthalamide (PPA)
Processing Methods:
Injection Molding
Flexural Modulus:
37000.0 - 37000.0 MPa
KyronMAX® S-4340 is a hi-temp PPA injection molding compound filled with ultra high strength carbon fiber. No stock shapes offered, only injection molding pellets.
Mitsubishi Chemical Group Corporation
KyronMAX® S-2220
Polymer Name:
Polyamide 66 (PA 66)
Processing Methods:
Injection Molding
Flexural Modulus:
15000.0 - 15000.0 MPa
KyronMAX® S-2220 is a high-performance polymer that combines the excellent strength and toughness of nylon with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength and stiffness are required.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessNylon base: provides excellent toughness and impact resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionBenefits:Improved strength and stiffness of components in demanding environmentsIncreased resistance to wear and tearEnhanced performance and durability of your productsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industriesComponents that require high strength and stiffness, such as gears and bearing componentsIndustrial and manufacturing equipment where high strength and stiffness is neededComponents that require high strength and stiffness in harsh environmentsKyronMAX® S-2220 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries.Please note that no stock shapes are offered, only injection molding pellets.lets.
Mitsubishi Chemical Group Corporation
KyronMAX® S-2212
Polymer Name:
Polyamide 66 (PA 66)
Processing Methods:
Injection Molding
Flexural Modulus:
12000.0 - 12000.0 MPa
KyronMAX® S-2212 is an advanced polymer material that combines the excellent strength, stiffness, and impact resistance of nylon with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength, stiffness, and toughness are required.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessNylon base: provides excellent impact resistance, toughness and good chemical resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength in high temperature environments.Benefits:Improved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear, impact and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industries, where high temperature and chemical resistance is requiredComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesComponents that need high toughness, such as gears, cogs, and sprockets for industrial machinery and equipmentKyronMAX® S-2212 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries. Please note that no stock shapes are offered. It's important to mention that the carbon fiber content can vary, always consult with the manufacturer for the exact content and its effect on the properties of the final material.
Show
36
of 5,366 results
Go to page
1
2
3
4
5
6
7
8
9
10