Products in Polyamides

VESTAMID® NRG 2901 BK is a high-viscosity, heat-stabilized compound with exceptional mold release properties. It is nucleated to reduce cycle time and shrinkage of molded parts. It is commonly used for gas pipes and fittings, with a proven record of safe and reliable performance in demanding applications, including fuel lines in passenger cars, air brake tubing in trucks, and offshore applications.

VESTAMID® X7167 NC is a high-quality polyamide 12 (PA12) compound formulated for exceptional heat stability and flame retardancy. This compound incorporates a non-migrating flame retardant that is free of halogens and phosphorous, making it an ideal choice for interior parts in aircraft, railways, and ships. VESTAMID® X7167 NC meets the stringent requirements of FAR 25.853 or ABD 0031, ensuring compliance and safety in these demanding applications. This versatile resin can be processed through extrusion or injection molding methods. However, it is important to note that the melt temperature should not exceed 260 °C to maintain the effectiveness of the flame retardant. We recommend melt temperatures within the range of 210–230 °C for optimal performance. VESTAMID® X7167 NC is conveniently supplied as cylindrical pellets, packaged in moisture-proof bags, ready for immediate use. Trust VESTAMID® X7167 NC for reliable and flame-resistant solutions in interior component manufacturing.

VESTAMID® L1723 BK 9.7624 is a low-viscosity, plasticized PA12 resin suitable for injection molding. It has been developed specifically for the production of strip clips and cable ties. The parts made from this resin maintain their dimensions in environments with varying humidity levels while possessing high tenacity, a low coefficient of friction, and good chemical resistance.

VESTAMID® L1833 BK 9.7623 is a 23% glass fiber-reinforced, easily demoldable, and heat-stabilized polyamide 12 compound. This compound is specifically formulated to provide efficient production of injection molded parts with short cycle times, thanks to its excellent mold release properties. VESTAMID® L1833 BK 9.7623 is supplied as cylindrical granules, conveniently packaged in moisture-proof bags, ensuring optimal storage conditions. Experience the reliability and performance of VESTAMID® L1833 BK 9.7623 in your injection molding applications. This compound, with its glass fiber reinforcement, offers enhanced strength and rigidity, while its demolding characteristics and heat stability contribute to efficient production. Choose VESTAMID® L1833 BK 9.7623 for its exceptional properties, ease of processing, and suitability for a wide range of injection molded parts.

VESTAMID® L2140 BK 9.7504 is a heat- and light-stabilized polyamide 12 compound designed for extrusion of tubing and semi-finished products such as fuel lines. The properties of this material are minimally affected by changing humidity due to its low moisture absorption. Parts made from this semi-crystalline material exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance.

VESTAMID® X7393 NC is a high-viscosity, plasticized, impact-modified, heat- and light-stabilized polyamide 12 compound used for flexible tubing and hoses in the automobile industry. Parts made from VESTAMID® X7393 NC exhibit optimized cold temperature impact resistance and increased burst pressure resistance in the extrusion of semi-rigid tubing. Additionally, it offers an exceptional low coefficient of friction and good chemical resistance.

VESTAMID® X7293 BK 9.7507 is a plasticized polyamide 12 compound formulated with heat and light stabilizers for the extrusion of flexible tubing and hoses, particularly suited for automotive applications. This compound conforms to standards such as DIN 73378 (PA 12-HIPHL, Type 1), ISO/DIN 7628-1 (PA 12-HIPEHL, Type 1), and SAE J844. VESTAMID® X7293 BK 9.7507 offers easy processing and high impact strength at low temperatures. Its low moisture absorption ensures minimal variation in properties with changing humidity. Manufactured from this semicrystalline material, parts exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance. Supplied as cylindrical granules in moisture-proof bags, VESTAMID® X7293 BK 9.7507 is conveniently ready for use. Choose VESTAMID® X7293 BK 9.7507 for its reliability and superior performance in extrusion applications, ensuring excellent results for your automotive tubing and hose needs.

VESTAMID® L1930 BK 9.7503 is a heat-stabilized PA 12 compound reinforced with 30% milled glass fibers. It is suitable for injection molding applications. The reinforcement provides high strength and rigidity to the moldings. Due to the low water absorption of PA 12, parts made from this compound exhibit good dimensional stability and maintain mechanical properties even with changing ambient humidity.

VESTAMID® LX9008 BK 9.7504 is a plasticizer-free polyamide 12 compound renowned for its exceptional long-term resistance under thermal load. This compound is specifically designed for the production of flexible tubes exposed to higher temperatures, making it ideal for applications in the engine compartment of motor vehicles. When utilized as diesel fuel lines, VESTAMID® LX9008 BK 9.7504 demonstrates significant advantages over standard grades, as evident in storage tests with diesel fuel. With low moisture absorption, this material maintains the dimensions and properties of finished parts even in changing ambient conditions. However, when using VESTAMID® LX9008 BK 9.7504 for fuel lines, certain prerequisites must be considered. Experience the outstanding long-term thermal resistance and reliability of VESTAMID® LX9008 BK 9.7504 for your demanding applications.

TROGAMID® myCX eCO is a microcrystalline transparent polyamide used for manufacturing parts in the optical industry, such as lenses, using the injection molding process. It is produced using production technology that maximizes the potential for CO2 emission savings of up to 50%.

VESTAMID® LX9001 BK 9.7504 is a heat-stabilized and light-resistant PA 12 compound specifically developed for the extrusion coating of steel tubes. This compound enhances the corrosion resistance of steel tubes through its exceptional impact strength, abrasion resistance, and chemical resistance. The excellent adhesion between the steel and the properly applied VESTAMID® LX9001 BK 9.7504 further contributes to this increased corrosion resistance. Additionally, VESTAMID® LX9001 BK 9.7504 offers the advantages of low water absorption, good dimensional stability, and consistent properties even in changing ambient humidity. Supplied as cylindrical pellets in moisture-proof packaging, they are ready for seamless processing. Experience the exceptional qualities of VESTAMID® LX9001 BK 9.7504 and enhance the performance and durability of steel tubes with its reliable coating solution.

VESTAMID® Terra DS16 NC is a medium-viscosity PA 1010 basic polymer. It is semi-crystalline, which contributes to its high mechanical resistance and chemical stability. It has low water absorption and excellent dimensional stability. VESTAMID® Terra DS16 is suitable for manufacturing films with good transparency.

VESTAMID® LX9112 BK is a heat-stabilized, conductive polyamide 12 compound specifically developed for the pore-free extrusion coating of steel tubing. It stands out from commonly used conductive extrusion compounds due to its significantly lower melt viscosity and outstanding extrusion characteristics, even in very thin coatings.

VESTAMID® LX9013 BK 9.7507 is a plasticized polyamide 12 compound with exceptionally high long-term resistance under thermal load. It has low moisture absorption, resulting in minimal dimensional and property changes under changing ambient conditions. Extruded tubes made from VESTAMID® LX9013 BK 9.7507 are impact-resistant, even at low temperatures. This material is suitable for producing flexible tubes that are consistently exposed to higher temperatures, such as in the engine compartment of motor vehicles.

VESTAMID® eCO LX9039 BBM100 is a unique polyamide 12 product offered by Evonik. It is an unmodified polyamide 12 with medium viscosity and does not contain any stabilizers or processing aids. This specific formulation is typically utilized in special circumstances where the absence of additives is desired or the presence of processing aids could cause interference. The "eCO" in its name reflects Evonik's commitment to reducing CO2 emissions by utilizing renewable or circular feedstocks through a mass-balance approach. VESTAMID® eCO LX9039 BBM100 provides a reliable solution for applications requiring a pure polyamide 12 material without any additional additives, catering to specific requirements in various industries.

VESTAMID® X7297 BK 9.7507 is a plasticized polyamide 12 compound with a heat and light stabilizer for the extrusion of flexible tubing and hoses, especially for automotive applications. It is characterized by easy processing and high impact strength at low temperatures.

VESTAMID® X7393 BK 9.7507 is a high-viscosity, plasticized, impact-modified, heat- and light-stabilized polyamide 12 compound for flexible tubing and hoses in the automobile industry. Parts made from VESTAMID® X7393 BK 9.7507 exhibit optimized cold temperature impact resistance, increased burst pressure resistance, a low coefficient of friction, and good chemical resistance.

VESTAMID® NRG 3001 NC is a polyamide 12 compound specifically developed for the manufacturing of hydrocarbon transport piping systems and liners. This material offers easy processing and excellent dimensional control during pipe extrusion, particularly for large diameter pipes. VESTAMID® NRG 3001 demonstrates exceptional compatibility with hydrocarbons such as crude oil, as well as oilfield chemicals like paraffin inhibitors. As a result, it delivers high dimensional stability and maintains unaffected properties for parts in contact with these substances. Experience the reliability and performance of VESTAMID® NRG 3001 in your hydrocarbon transport applications. Choose VESTAMID® NRG 3001 for its superior properties, easy processing, and excellent dimensional control, ensuring optimal performance and durability in your piping systems and liners.

VESTAMID® L2123 BK 9.7507 is a plasticized and high-viscosity polyamide 12 compound designed for the extrusion of flexible tubing and hoses, particularly in the automotive industry. This compound complies with DIN 73 378, Type: PA 12-PHL, for tubing. Thanks to its low moisture absorption, compounds based on PA 12 demonstrate minimal variation in properties with changing humidity. Parts made from this semi-crystalline material exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance. VESTAMID® L2123 BK 9.7507 features a high melt viscosity, optimized cold temperature impact resistance, and precise dimensional control during pipe extrusion. Supplied as cylindrical granules in moisture-proof bags, they are ready for seamless processing. Choose VESTAMID® L2123 BK 9.7507 for its reliability, high-viscosity performance, and excellent properties in your flexible tubing and hose extrusion applications.

VESTAMID® NRG 1001 is a high-viscosity, plasticized, and impact-modified PA 12 compound with heat and light stabilizers for the extrusion of flexible tubing and hoses, particularly for oil and petrochemical applications. It offers easy processing and good dimensional control during pipe extrusion, especially for large pipe diameters.

VESTAMID® NRG 2101 YE is a high-molecular-grade PA-12 material developed by Evonik. It is designed for use in thermoplastic piping systems at higher operating pressures and larger diameters, replacing metallic piping systems in a safe and cost-effective manner. It offers superior performance characteristics.

VESTAMID® L2124 BK 9.7507 is a plasticized polyamide 12 compound specially formulated for the extrusion of flexible tubing and hoses in oil and petrochemical applications. This heat- and light-stabilized compound complies with DIN 73-378, Type: PA 12-PHL, for tubing. Its low moisture absorption ensures minimal variation in properties with changing humidity. Manufactured with exceptional impact strength, a low coefficient of friction, and good chemical resistance, parts made from VESTAMID® L2124 BK 9.7507 exhibit outstanding performance. With its high melt viscosity and precise dimensional control during pipe extrusion, this semi-crystalline material provides reliability and ease of processing. Supplied as cylindrical granules in moisture-proof bags, VESTAMID® L2124 BK 9.7507 is ready for seamless integration into your production process.

VESTAMID® DX9303 BK E70288 is a PA 612 extrusion compound developed for tubing systems with higher heat resistance requirements. Its melting point is approximately 35°C higher than that of PA 11 and PA 12 compounds, allowing for higher peak temperatures during use. This compound meets the increased demands resulting from higher temperatures in the engine compartment.

VESTAMID® DX9304 BK E70238 is an extrusion compound specifically developed for the manufacturing of tubing systems that require higher heat resistance. With a melting point approximately 35 °C higher than PA 11 and PA 12 compounds, VESTAMID® DX9304 BK E70238 allows for elevated temperatures during use. This compound is particularly well-suited for extruding tubing systems that are exposed to high burst pressures and high service temperatures, such as hydraulic clutch lines. Thanks to its low moisture absorption, the dimensions and properties of parts remain largely unaffected by ambient conditions. Choose VESTAMID® DX9304 BK E70238 for its exceptional heat resistance, reliability, and ability to meet the demanding requirements of tubing systems.

VESTAMID® DX9330 NC is a PA 612 base polymer that does not contain any stabilizers or additives. This versatile material is suitable for both extrusion and injection molding applications. VESTAMID® DX9330 NC is primarily used in special cases where additives are not preferred or processing aids are unnecessary, such as filament extrusion. With its optimal balance of amino and carboxyl end groups, this material offers ease of processing and dyeability. PA 612 is known for its moderate water absorption, good dimensional stability, and consistent properties in varying ambient humidity conditions. VESTAMID® DX9330 NC is supplied as cylindrical granules in moisture-proof bags, ready for seamless processing. Maintain a processing temperature range of 250°C to 290°C for optimal results. Choose VESTAMID® DX9330 NC for its reliability, versatility, and ease of processing in your specialized applications.

VESTAMID® X7293 is a plasticized polyamide 12 compound with a heat and light stabilizer for the extrusion of flexible tubing and hoses, especially for automotive applications. It is known for its easy processing and high impact strength at low temperatures.

VESTAMID® D18 is a medium-viscosity polyamide 612 compound that is specifically designed for extrusion and injection molding processes. It is commonly used for applications such as monofilaments, including toothbrush bristles. The material exhibits low water absorption, which contributes to the exceptional dimensional stability of components even when exposed to varying ambient humidity conditions. VESTAMID® D18 is suitable for profile extrusion processing techniques.

VESTAMID® NRG 5901 BK is a high-molecular-weight PA-12 material developed by Evonik. This exceptional material offers superior performance characteristics, making it an ideal choice for expanding the use of thermoplastic piping systems. With its ability to handle higher operating pressures and larger diameters, VESTAMID® NRG 5901 BK provides a safe and cost-effective alternative to metallic piping systems. In addition to extending the operating pressure limits of thermoplastic piping systems, it offers numerous benefits and, in many cases, outperforms conventional PE piping systems. Experience the reliability, durability, and enhanced performance of VESTAMID® NRG 5901 BK in your piping applications. Choose VESTAMID® NRG 5901 BK for its superior properties and cost-effective solution, ensuring the safe and efficient operation of your thermoplastic piping systems.

VESTAMID® L1670 is a low-viscosity polyamide 12 compound that has been specifically developed with heat and light stabilization for the extrusion of thin wire insulations and cable jacketings. Coatings made from VESTAMID® L1670 demonstrate a low coefficient of friction, which greatly facilitates the process of laying cables. This compound is well-suited for profile extrusion and wire and cable extrusion processing techniques.

TROGAMID® CX7323 NC is a specialized polyamide designed for injection molding applications. This microcrystalline transparent polyamide exhibits exceptional transparency to the human eye due to its extremely small crystallite size, which prevents the scattering of visible light. The material's crystalline structure also imparts outstanding crack resistance, ensuring durability and reliability in various manufacturing processes. TROGAMID® CX7323 is conveniently supplied as spherical pellets, packaged in polyethylene. This product allows for a certain degree of flexibility in molds and processing, enabling adjustments to accommodate specific cavity requirements or optimize the overall manufacturing process. With its unique properties, TROGAMID® CX7323 offers a reliable solution for the production of transparent parts through injection molding.

VESTAMID® L2124 NC is a plasticized, heat- and light-stabilized polyamide 12 compound specially designed for the extrusion of flexible tubing and hoses, particularly for oil and petrochemical applications. This compound conforms to DIN 73 378, Type: PA 12-PHL, for tubing. VESTAMID® L2124 NC is characterized by its high melt viscosity and excellent dimensional control during pipe extrusion. Compounds based on PA12 demonstrate minimal variation in properties with changing humidity due to their low moisture absorption. Parts made from this semi-crystalline material exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance. Choose VESTAMID® L2124 NC for its reliable performance, versatility, and exceptional properties, ensuring the durability and reliability of your flexible tubing and hose applications.

VESTAMID® D16 is a medium-viscosity Polyamide 612 compound for extrusion and injection molding applications such as monofilaments (e.g., toothbrush bristles). The material based on PA612 absorbs only small amounts of water, resulting in excellent dimensional stability of components under changing ambient humidity.

KyronMAX® S-2220 is a high-performance polymer that combines the excellent strength and toughness of nylon with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength and stiffness are required.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessNylon base: provides excellent toughness and impact resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionBenefits:Improved strength and stiffness of components in demanding environmentsIncreased resistance to wear and tearEnhanced performance and durability of your productsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industriesComponents that require high strength and stiffness, such as gears and bearing componentsIndustrial and manufacturing equipment where high strength and stiffness is neededComponents that require high strength and stiffness in harsh environmentsKyronMAX® S-2220 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries.Please note that no stock shapes are offered, only injection molding pellets.lets.

KyronMAX® S-4330 is a high-performance polymer that combines the excellent strength, stiffness, and thermal resistance of high-temperature PPA (polyphenylsulfone) with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength, stiffness, thermal stability, and chemical resistance are required, especially at high temperatures.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessHigh-temperature PPA base: provides excellent thermal stability, dimensional stability, and chemical resistance at high temperaturesInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength at high temperatures.Benefits:Improved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industries, where high temperature and chemical resistance is requiredComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesElectrical and electronic components where high temperature, chemical and dimensional stability is needed, such as in high temperature motors and generators.KyronMAX® S-4330 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries.Please note that no stock shapes are offered

KyronMAX® S-4230 is a high-performance polymer that combines the excellent strength, stiffness and thermal resistance of PPA (polyphenylsulfone) with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength, stiffness, thermal stability, and chemical resistance are required.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessPPA base: provides excellent thermal stability, dimensional stability and chemical resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength in high temperature environments.Benefits:Improved strength and stiffness of components in demanding environmentsIncreased resistance to wear and tear and high temperatureEnhanced performance and durability of your products in high temperature and chemical environmentsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industries, where high temperature and chemical resistance is requiredComponents that require high strength and stiffness, such as gears, bearing components, and bushingsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesElectrical and electronic components where high temperature, chemical and dimensional stability is neededKyronMAX® S-4230 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries.Please note that no stock shapes are offered

KyronMAX® S-4340 is a hi-temp PPA injection molding compound filled with ultra high strength carbon fiber. No stock shapes offered, only injection molding pellets.