Products in Plastics: Extrusion Coating

SBC818 is a low-density polyethylene specially formulated for coating processes. This grade exhibits excellent optical properties, minimal neck-in during processing, film stability, and strong adhesion on porous substrates. It does not contain any additives. Moreover, it has a minimum carbon biobased content of 95%, as determined by ASTM D6866.

For more information regarding REACH, please visit Braskem's site

SBC818R50 is a low-density polyethylene specifically designed for coating processes. This grade showcases exceptional optical properties, low neck-in, film stability, and strong adhesion on porous substrates. It is free from additives. Notably, it possesses a minimum carbon biobased content of 50%, as determined by ASTM D6866.

For more information regarding REACH, please visit Braskem's site

VESTAMID® LX9001 BK 9.7504 is a heat-stabilized and light-resistant PA 12 compound specifically developed for the extrusion coating of steel tubes. This compound enhances the corrosion resistance of steel tubes through its exceptional impact strength, abrasion resistance, and chemical resistance. The excellent adhesion between the steel and the properly applied VESTAMID® LX9001 BK 9.7504 further contributes to this increased corrosion resistance. Additionally, VESTAMID® LX9001 BK 9.7504 offers the advantages of low water absorption, good dimensional stability, and consistent properties even in changing ambient humidity. Supplied as cylindrical pellets in moisture-proof packaging, they are ready for seamless processing. Experience the exceptional qualities of VESTAMID® LX9001 BK 9.7504 and enhance the performance and durability of steel tubes with its reliable coating solution.

VESTAMID® LX9112 BK is a heat-stabilized, conductive polyamide 12 compound specifically developed for the pore-free extrusion coating of steel tubing. It stands out from commonly used conductive extrusion compounds due to its significantly lower melt viscosity and outstanding extrusion characteristics, even in very thin coatings.

BioPBS™ FZ79AC is a bio-based polybutylene succinate (PBS) produced through the polymerization of bio-based succinic acid and 1,4-butanediol. Similar to LDPE, BioPBS™ is a soft and flexible semi-crystalline polyester that possesses excellent properties, making it well-suited for cast extrusion and extrusion coating applications such as compostable paper cups. Due to its bio-based composition, this product excels in terms of biodegradability and compostability, offering a convenient solution to enhance sustainability goals.

BioPBS™ FX83AC is a bio-based polybutylene succinate adipate (PBSA) produced through the polymerization of bio-based succinic acid, 1,4-butanediol, and adipic acid. Similar to LDPE, BioPBS™ is a soft and flexible semi-crystalline polyester with outstanding properties that make it suitable for cast extrusion and extrusion coating applications, such as compostable paper cups. FX83AC has been specifically developed for use in home compostable 1-sided coated paper, designed for hot and cold beverage applications.

BioPBS™ FX85AC is a bio-based polybutylene succinate adipate (PBSA) produced through the polymerization of bio-based succinic acid, 1,4-butanediol, and adipic acid. Similar to LDPE, BioPBS™ is a soft and flexible semi-crystalline polyester with excellent properties that make it well-suited for cast extrusion and extrusion coating applications, including the production of compostable paper cups. FX85AC has been specifically developed for use in home compostable coated paper, catering to frozen and cold beverage applications.

Aegis® H85NP is a medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown BOPA film. It offers a combination of strength, toughness and thermoforming properties as well as excellent heat, chemical and abrasion resistance.

Aegis® H85QP is a lubricated, medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown film. It combines strength, toughness and strong thermoforming properties with excellent heat, chemical and abrasion resistance.

Aegis® H55C2ZP is a 2.7 RV, unfilled, medium viscosity, non-lubricated, polyamide 6/66 copolymer for molding or compounding. With a broad processing window and excellent melt fluidity for filling thin sections, it provides exceptional processability. Aegis® H55C2ZP resin combines strength, stiffness and toughness with chemical and abrasion resistance. For glass- or mineral-filled applications, Aegis® H55C2ZP resin also offers superior surface appearance and low warp.

Aegis® H55QP is a medium viscosity, lubricated, nylon 6 homopolymer well-suited for general extrusion and extrusion coating.

Aegis® PIR-H85NP resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H85NP, its standard, non-recycled counterpart.Aegis® PIR-H85NP is a medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown BOPA film. It offers a combination of strength, toughness and thermoforming properties as well as excellent heat, chemical and abrasion resistance.

Ti-Pure™ TS-1510 is a highly efficient rutile titanium dioxide pigment that is manufactured with a revolutionary processing technology. It was designed to significantly enhance the level of processing efficiency in plastics applications, including POMB. Ti-Pure™ TS-1510 provides improved flowability, line productivity, energy, and labor efficiencies, along with low-dusting that promotes safer handling and material efficiency. It is excellent for high-temperature plastic applications requiring outstanding dispersibility and the lowest possible volatility.

Ti-Pure™ R-101 is a rutile titanium dioxide pigment manufactured by the chloride process. This grade is a fine, dry, white powder that is excellent for high-temperature plastic applications requiring outstanding dispersibility and the lowest possible volatility. It is recommended for use as a coloring agent pigment.

Ti-Pure™ R-350 is designed to exceed today’s expectations for titanium dioxide and set tomorrow’s standard in plastic formulations. This product is intended for formulators looking for a single grade of TiO2 with performance suitable for a wide range of plastic end uses. It provides a matchless combination of excellent dispersion and processing, minimal volatile content, minimal interaction with polymer additives, durability, and the brightness that only chloride-produced rutile TiO2 can provide. This product is the only TiO2 available that can offer such an exceptional set of properties.

Ti-Pure™ R-104 is a rutile titanium dioxide pigment manufactured by the chloride process. It is supplied as a fine, dry, white powder and is specifically designed to give outstanding melt flow with highly loaded thermoplastic masterbatches. Ti-Pure™ R-104 combines high tint strength with a blue undertone. This product offers excellent lacing resistance in high-temperature extrusion coating and cast film applications.

Ti-Pure™ R-103 is a rutile titanium dioxide pigment manufactured by the chloride process. Its high opacity and very blue undertone tint produce clean, bright whites at low loadings in clear resins and those with natural color. Ti-Pure™ R-103 is specially formulated to reduce the discoloration of resin compounds and finished plastic products during processing and exposure to ultraviolet light.

BRUGGOLEN® TP-R2090 is our recycling additive for polyolefins Bruggolen® R recycling additives improve the polyolefin recycling processes and help recyclers to produce higher value polyolefine recyclates for long term applications. For the first time the new repairing technology allows to repair damages from prior use. BRUGGOLEN® TP-R2090 for Upcycling of post-industrial and post-consumer polypropylene waste streams: Repair of damage in the polymer chains by novel chemical system. High quality recyclates for demanding long term applications Prolonged retention of mechanical properties during long term heat aging. One-Pack solution stabilizes the recycling process

EXTINITY® 0201-312 is a highly loaded antimony trioxide concentrate that can be used for a variety of applications including film, sheet, and extrusion coating. The content of antimony trioxide in EXTINITY® 0201-312 is 80%, by weight. Use of EXTINITY® 0201-312 eliminates the exposure hazards typically associated with handling antimony trioxide powder, since all of the antimony trioxide powder is dispersed, distributed and encapsulated in a LDPE carrier resin.

BRUGGOLEN® Recycling R8895 is a recycling additive for polyolefines. It is used for upcycling Polypropylene from car battery cases: Repair of damage in the polymer chains by a novel chemical system. High-quality recyclates for demanding long-term applications Prolonged retention of mechanical properties during long-term heat aging. Neutralization of acidic contaminations. One-Pack solution stabilizes the recycling process. Bruggolen® R recycling additives improve the polyolefin recycling processes and help recyclers to produce higher-value polyolefine recyclates for long-term applications. For the first time, the new repairing technology allows repairing damages from prior use.

Sylvin™ 8466-90FUV Blue 8324 is a vinyl / polyurethane compound formulated for extruded yarn coating applications that require good abrasion resistance.

Sylvin Technologies Sylvin™ 8377-75UV Black 298 is a RoHS & reach compliant, vinyl compound formulated for vinyl coated nylon yarns for braiding harness type constructions of electrical wiring systems.

Sylvin Technologies Sylvin™ 8377-75UV Yellow 4210 is a RoHS & reach compliant, vinyl compound formulated for vinyl coated nylon yarns for braiding harness type constructions of electrical wiring systems.

Nylene Nylon-6 extrusion grade suitable for coating and film co-extrusion applications Excellent melt stability and strength Superior grease resistance, toughness, resistance to abrasion, and does not absorb food odors Meets the requirements of FDA regulation 21 CFR 177,1500 for direct food contact

72307E is a LLDPE produced by the Spherilene Technology 72307E can be used in Extrusion Coating on HDPE Woven Fabric, Aluminum Foil, Jute, Paper & Allied Substrates The precise morphological control achieved during polymerization confers superior processability and improved performance properties not available in conventional LLDPE

Sylvin Technologies Sylvin™ 8377-75UV Yellow 4209 is a RoHS & reach compliant, vinyl compound formulated for vinyl coated nylon yarns for braiding harness type constructions of electrical wiring systems.

Sylvin™ 6231-85 Black is a flame retarded vinyl compound formulated for yarn coating applications.

Hanwha Solutions LDPE 961 is manufactured by autoclave process and designed for variety of extrusion coating application such as flexible packaging, paper coating etc. LDPE 961 is well known for its excellent neck-in, draw-down and high quality assurance. This product complies with U.S. FDA regulation 21 CFR 177.1520 (c) 2.1.

Sylvin Technologies Sylvin™ 8377-75UV Black 2101 is a RoHS & reach compliant, vinyl compound formulated for vinyl coated nylon yarns for braiding harness type constructions of electrical wiring systems.

Sylvin™ 8376-92UV Black 2101 is a high performance RoHS & reach compliant vinyl compound formulated for vinyl coated nylon yarn applications.

Hanwha Solutions LDPE 963 is manufactured by autoclave process and designed for variety of extrusion coating application such as paper and Tarpaulin coating etc. LDPE 963 is well known for its excellent processability and high quality assurance. This product complies with U.S. FDA regulation 21 CFR 177.1520 (c) 2.1.

Sylvin™ 83028-90 Black is a vinyl compound formulated for extruded yarn coating applications that require higher heat resistance.

Sylvin™ 8378-85 Black is a vinyl compound formulated for vinyl coated nylon yarns.

Supreme Petrochem SP7101 9555 are formulated with high quality resins & pigments designed to give excellent whiteness & opacity, superior rheology, uniform dispersion & ease of dilution, color fastness and processing stability. The grades are produced on state of the art Equipments and complying with stingentquality requirements, to mee tthe functional Requirements of a wide range of applications.

L-270A is the polypropylene Copolymer manufactured by under the Spheripol process. This grade is designed to potential end use applications include Extrusion coating on Woven and Kraft paper. Low neck-in, High speed process ability, Good adhesive property to paper and Kraft paper, Oil & moisture permeation resistance.

Quality Minerals WHITE TiO2 MASTERBATCHES with premium quality of titanium dioxide and polyolefin resins is a versatile product that can be used in virtually all major plastic processing methods.