Products in Parts, Shapes & Films

Sultron® LSG R5500 PPSU Black BK937 is designed for healthcare and pharmaceutical applications. It offers numerous features, including high ductility, ethylene oxide sterilizability, biocompatibility, hydrolysis resistance, excellent sterilization resistance, X-ray sterilizability, alkali resistance, life science grade, gamma sterilizability, steam sterilizability, acid resistance, heat sterilizability, and plasma gas sterilizability. It comes in various colors, including gray, black, orange, brown, blue, red, green, yellow, and off-white, and is a product available in the physical form of parts and shapes.

TIVAR® Sterra™ DrySlide UHMW-PE is an internally lubricated product. This lubricant is built into the PE-UHMW matrix with a higher molecular weight. It offers a lower coefficient of friction and enhanced wear and abrasion resistance than TIVAR® 1000 PE-UHMW. The additives used also make this material static dissipative and considerably improves UV-resistance. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Semitron® MPR 1000 - an advanced engineering material that is specially developed for use in the semiconductor and electronics industry. This material boasts excellent heat resistance and low erosion rates in plasma chambers, making it a top choice for vacuum chamber applications such as etch, CVD, and ion implant.Features:Longevity: Increased life in plasma chambers (up to 25X over polyimide in ozone)Clean: Low ionic metal content and low out-gassingValue: Lower overall cost in use compared to traditional materials used in vacuum chamber applications such as quartz, ceramics, and engineering plasticsBenefits:Long-lasting performance in plasma-based vacuum chambersLow maintenance and cost-effective solutionClean and efficient, suitable for semiconductor and electronics industryApplications:Clamp ringsTrench ringsScrewsPinsShower headsCentering pinsFocus ringsInsulatorsVacuum padsWafer guidesSemitron® MPR 1000 is a versatile material that is ideal for use in vacuum chamber applications within the semiconductor and electronics industry. With its outstanding heat resistance and low erosion rates, this material is a cost-effective and efficient solution that ensures longevity and clean performance in plasma-based vacuum chambers.

Acetron® GP Polyoxymethylene POM-C / Ertacetal® C Polyoxymethylene POM-C - the ultimate general-purpose, copolymer acetal grade that offers unparalleled performance and versatility.Features:Porosity free nature ensures a high-quality finish and long-lasting durabilityLow moisture absorption ensures that your components remain stable and dimensionally accurate, even in humid environmentsExcellent machinability allows for easy processing, reducing costs and increasing efficiencyBenefits:The porosity-free nature of Acetron® GP POM-C makes it ideal for Food Contact and medical applications, meeting FDA, NSF, Canada AG, and SSI Standard compliance requirementsThe low moisture absorption capability of this material ensures that your components remain stable and dimensionally accurate, even in humid environments, increasing the lifespan of your productThe excellent machinability of Acetron® GP POM-C makes it easy to process, reducing costs and increasing efficiency in your manufacturing processApplications:Food Contact and Medical ApplicationsBearings and BushingsGears and Electrical ComponentsMedical and Diagnostic EquipmentValves and Fluid Handling Components"

Ketron® LSG FG PEEK is a product available in the form of plates and rods and boasts a range of features including X-ray sterilizability, high stiffness, life science grade, gamma sterilizability, excellent mechanical strength, heat resistance, steam sterilizability, heat sterilizability, plasma gas sterilizability, chemical resistance, ethylene oxide sterilizability, and biocompatibility. It is offered in both beige and black colors and is suitable for applications in equipment and parts, particularly connectors.

Fluorosint® 500 is an advanced polymer material that combines the excellent chemical resistance, low friction, and high temperature properties of PTFE (polytetrafluoroethylene) with added stability and wear resistance. This material is designed to excel in demanding applications where high performance, reliability, and tight dimensional control are required.Key features:Nine times greater resistance to deformation under load than unfilled PTFE: provides excellent wear and deformation resistanceLow coefficient of linear thermal expansion: approaches the expansion rate of aluminum and is 1/4 that of virgin PTFE, eliminating fit and clearance problems for designersPTFE base: provides excellent chemical resistance, low friction, and high temperature propertiesStock shapes available: allows for easy incorporation into your designs and efficient productionBenefits:High resistance to deformation under load, making it ideal for sealing applications where tight dimensional control is requiredLow coefficient of linear thermal expansion, eliminating fit and clearance problems in high temperature and dynamic environmentsEnhanced performance and durability of your products in high temperature and chemical environmentsImproved reliability and safety in critical applications.Applications:Sealing applications where tight dimensional control is requiredHigh temperature and dynamic environments where fit and clearance are a concernChemical processing industries where high chemical and hydrolysis resistance is neededAny application that requires stability and wear resistance in harsh environments.Fluorosint® 500 is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in stock shapes as well as custom shapes, it allows for efficient production and the ability to create complex geometries. With its added stability and wear resistance, Fluorosint® 500 is an excellent choice for applications in chemical processing, aerospace, automotive and other industries where tight dimensional control and high-performance sealing are required.

Ketron® CM GF30 Polyetheretherketone PEEK, a compression-molded, 30% glass fiber reinforced grade that offers excellent dimensional stability and outstanding chemical, corrosion, and creep resistance. This brownish-grey colored material is designed for applications where high strength, stiffness, and stability are needed in extreme environments. Features: 30% glass fiber reinforced for added strength and stiffness Excellent dimensional stability and outstanding chemical, corrosion, and creep resistance Low expansion rate and high flexural modulus Suitable for large structural applications that require superior strength, stiffness, and stability Benefits: Offers a higher stiffness and creep resistance than Ketron 1000 PEEK Has a much better dimensional stability Ideal for structural applications carrying high static loads for long periods of time at elevated temperatures Applications: Structural applications Aerospace industry Automotive industry Medical industry Industrial machinery Chemical processing Ketron® CM GF30 PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your structural applications in the aerospace, automotive, medical, industrial machinery or chemical processing industries, Ketron® CM GF30 PEEK is the ideal solution. However, it is important to note that the glass fibers tend to abrade the mating surface so the suitability for sliding parts should be carefully examined.

Ketron® LSG CA30 PEEK is a product available in the form of plates and rods, and possesses an array of beneficial features including ethylene oxide sterilizability, biocompatibility, X-ray sterilizability, high stiffness, life science grade, gamma sterilizability, excellent mechanical strength, heat resistance, steam sterilizability, heat sterilizability, wear resistance, plasma gas sterilizability, dimensional stability, chemical resistance, and creep resistance. It comes in a sleek black color and is well-suited for applications in appliances and electronics. Potential uses include nailing target devices, grips, adapters, and washers.

Ertacetal® H / Acetron® H Polyoxymethylene POM-H is a homopolymer acetal grade that offers exceptional mechanical strength, stiffness, hardness, and creep resistance, making it the perfect choice for a wide range of demanding applications.Features:Superior mechanical properties that allow the use of standard fastenersExcellent stability and machining properties that reduce machining costsDurable material that allows for easy installation and removal with minimal distortionHigh chemical resistance for a long service lifetimeHigh impact strength, even at low temperaturesExcellent dimensional stability with low water absorptionBenefits:Reduced machining costs and improved efficiency in manufacturingLong-lasting and durable components that can withstand demanding conditionsEasy installation and removal, even in tight spacesHigh chemical resistance ensures a long service lifetimeHigh impact strength, even at low temperatures, ensures reliable performance in any environmentExcellent dimensional stability ensures consistent and accurate resultsApplications:Small diameter, thin-walled bushings and bearingsGearsElectrical componentsMedical and diagnostic equipmentValvesFluid handling components

Duratron® T4301 PAI Polyamide-imide is a high-performance plastic that offers exceptional properties for severe service wear applications. The addition of PTFE and graphite provides this grade with improved wear resistance and dimensional stability, making it an ideal solution for non-lubricated bearings, seals, bearing cages, and reciprocating compressor parts.Features:Very low expansion rate and coefficient of frictionLittle to no slip-stick in useExcellent dimensional stability over a wide temperature rangeHigh flexural modulus of 1,000,000 psiHigher wear resistance compared to unfilled Duratron® T4203 PAI gradeBenefits:Allows for increased bearing speeds and extended part lifeCan be used in severe service wear applicationsIdeal for non-lubricated bearings, seals, bearing cages, and reciprocating compressor partsApplications:Bearings and bearing cagesSealsReciprocating compressor partsOther severe service wear applicationsCompression-molded Duratron T4501 PAI is similar in composition to Duratron T4301 PAI, and is selected when larger shapes are required. Prior materials for these applications include steel cages, hardened steel balls, and bronze bushings. Duratron T4301 PAI (colour: black) also offers excellent dimensional stability over a wide temperature range.

Sultron® LSG PSU offers a variety of features that make it a suitable material for medical devices and assemblies. It exhibits excellent sterilization resistance, X-ray sterilizability, life science grade, excellent transparency properties, gamma sterilizability, good mechanical properties, steam sterilizability, heat sterilizability, plasma gas sterilizability, excellent thermal properties, good electrical properties, ethylene oxide sterilizability, biocompatibility, and hydrolysis resistance. It is a product available in yellow and translucent colors and can be found in the physical forms of plates and rods.

Acetron® C Sterra™ POM-C is a general-purpose copolymer acetal grade that is often favored for its porosity-free nature. Acetron® C Sterra™ POM-C shapes offer low moisture and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Techtron® 1000 PPS is a high-performance polymer known for its excellent dimensional stability, chemical resistance, and easy machinability. It is a unfilled grade of Polyphenylene Sulfide (PPS) and is ideal for a wide range of applications where precision and durability are required.Key features:Outstanding dimensional stability: minimal moisture absorption and low coefficient of linear thermal expansion make it easy to maintain tight tolerances.Easy machinability: this material can be machined to close tolerances, making it suitable for precise components.Corrosion resistance: due to its chemical resistance, this material is ideal for use in corrosive environments.Benefits:Improved performance and durability of components in demanding environmentsIncreased resistance to chemicals and moistureEnhanced precision and dimensional stabilityImproved machinability and tight tolerance controlApplications:Structural parts in corrosive environments such as chemical processing and oil and gas industry.Precision components and machine parts that require dimensional stability, wear and chemical resistanceElectrical components, as it has good electrical insulation and dielectric properties.Automotive and aerospace components as it can withstand high temperatures.Techtron® 1000 is a versatile and reliable material that can help improve the performance and longevity of your products, it's available in a range of shapes and sizes, making it easy to incorporate into your designs.

Ertalon® 4.6 and Nylatron® 4.6 are advanced polyamide PA46 shapes that are known for their superior heat aging resistance and ability to retain outstanding stiffness and creep resistance over a wide range of temperatures.Features:Superior heat aging resistanceRetains outstanding stiffness and creep resistance at high temperaturesOutperforms PA6, PA66, POM, and PET in extreme environmentsBenefits:Ideal for use in extreme environments where traditional materials fall shortCan withstand high temperatures without losing mechanical propertiesSuitable for a wide range of applications, including bushings, bearings, gears, pulleys, sheaves, wear pads, valve seats, seals, and conveyor wear componentsApplications:Bushings and bearings in extreme temperature environmentsGears and pulleys in high-heat industrial settingsWear pads and valve seats in harsh chemical environmentsSeals and conveyor wear components in high-temperature applications.

Techtron® HPV PPS is a high-performance polymer that combines the excellent chemical and corrosion resistance of Polyphenylene Sulfide (PPS) with the added wear resistance and strength of glass fiber reinforcement and internal lubrication. This compression-molded material is designed to excel in demanding environments and applications where wear resistance and dimensional stability are required.Key features:Superior wear resistance: internally lubricated and glass fiber-reinforced, allowing it to withstand high loads and minimize wear and tearOutstanding chemical and hydrolysis resistance: suitable for use in harsh environments and chemicalsExcellent dimensional stability: minimal moisture absorption and low coefficient of linear thermal expansion, making it easy to maintain tight tolerancesGreat electrical insulating and dielectric propertiesLow coefficient of friction and inherent low flammabilityGlass fiber reinforced: increased strength and stiffness, ideal for wear componentsFood grade availableBenefits:Improved performance and durability of components in demanding environmentsIncreased resistance to chemicals, corrosion, and wearEnhanced precision and dimensional stabilityImproved electrical insulation and dielectric propertiesReduced friction and lower flammability riskMore cost-effective than advanced engineering plastics for certain applicationsApplications:Wear components such as bushings and bearings, CIP wash down parts, and pump, valve, and compressor applications in the aerospace, food processing, and oil and gas industries.Industrial equipment such as industrial drying and food processing ovens (bearings, rollers, etc.)Chemical process equipment (pump-, valve & compressor components)Electrical insulating systemsCost-effective alternative to advanced engineering plastics in certain applicationsTechtron® HPV is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in a range of shapes and sizes, including food grade, making it easy to incorporate into your designs.

Semitron® CMP XL20 Polyamideimide PAI shapes were specifically developed for CMP ring applications in the semiconductor and electronics industry, due to their excellent long wear life in CMP slurries. In addition to these characteristics, Semitron® CMP XL20 PAI components display high strength and stiffness, and outstanding wear resistance over a broad range of temperatures, making this grade the ideal solution for dynamic applications in process environments.Features:Specifically developed for CMP ring applications in the semiconductor and electronics industryExcellent long wear life in CMP slurriesHigh strength and stiffnessOutstanding wear resistance over a broad range of temperaturesBenefits:Ideal solution for dynamic applications in process environmentsSignificantly lower cost per waferOutperforms PPS up to 20x in most processesPromotes fewer edge defects and better uniformityApplications:CMP ring applications in the semiconductor and electronics industryCan be used in clamp rings, trench rings, screws, pins, and shower headsSuitable for use in centering pins, focus rings, insulators, vacuum pads, and wafer guides.

Proteus® LSG HP PP-H is a product available in the form of plates and rods and is well-suited for various applications. This material is known for its features, including low leachability, X-ray sterilizability, life science grade, gamma sterilizability, high purity, plasma gas sterilizability, chemical resistance, low moisture absorption, ethylene oxide sterilizability, biocompatibility, and low extractable. It comes in the colors off-white and natural and offers excellent resistance to chemical cleaning agents and zero moisture absorption. Its applications include equipment and parts in various industries.

Nylatron® GSM Blue PA6 is a unique and advanced bearing grade that offers exceptional frictional characteristics, low coefficient of friction, and a low "k" factor. This makes it an ideal solution for high pressure and low speed applications, such as slide pads, thrust washers, and trunnion bearings. Additionally, it is also an excellent choice for bearing and wear parts in a wide range of automated equipment applications.Features:Superior frictional characteristicsLow coefficient of frictionGreater limiting PVLow "k" factorBroadest size range availabilityDark blue in colorBenefits:Ideal for high pressure and low speed applicationsExcellent wear resistanceGood mechanical and electrical propertiesIdeal balance of strength and toughnessLow coefficient of frictionApplications:Slide padsThrust washersTrunnion bearingsBearing and wear parts in automated equipment applications.

Kyron® GC100 Polyetheretherketone PEEK - Superior Dimensional Stability and Micro-Machinability for Semiconductor and Electronics ApplicationsFeatures:Unfilled injection molded shapesSuperior dimensional stability and stiffnessExcellent micro-machinability capabilities due to low CTE and tensile elongationBenefits:Specifically formulated for the semiconductor and electronics industryIdeal solution for burn in and test socket applications where precision machining is requiredApplications:Burn in and test socket applications in the semiconductor and electronics industryAny application requiring precision machining and excellent dimensional stability and stiffness.

Ketron® CA30 Polyetheretherketone PEEK is a 30% carbon fiber-reinforced grade that exhibits even higher stiffness, mechanical strength, and creep and wear resistance that Ketron® GF30 PEEK. With a significantly reduced thermal expansion, optimum load carrying capabilities, and high thermal conductivity rates, Ketron® CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications.

Ketron® HPV Polyetheretherketone PEEK shapes, a carbon fiber reinforced, graphite and PTFE lubricated material that offers the lowest coefficient of friction and the best machinability of all PEEK materials. This black-colored material is designed for applications where low wear and friction, and high pressure-velocity capabilities are needed. Features: Carbon fiber reinforced with graphite and PTFE lubricants Lowest coefficient of friction and best machinability of all PEEK materials Excellent tribological properties (low friction, long wear and high pressure-velocity capabilities) Benefits: Improves the performance of service bearings, bushings, insulators, valves, and seals with its combination of low wear and friction and high LPV Long wear and high pressure-velocity capabilities make it suitable for wear and friction applications The carbon fibers, PTFE and graphite lubrication results in a Ketron PEEK "Bearing Grade" Applications: Service bearings Bushings Insulators Valves Seals Wear and friction applications Ketron® HPV PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your service bearings, bushings, insulators, valves, and seals or need a material suitable for wear and friction applications, Ketron® HPV PEEK is the ideal solution.

Ketron® Sterra™ 1000 PEEK is an unfilled, general-purpose grade known for its exceptional elongation and toughness. It is ideal for instrument and seal components, where ductility and inertness are crucial. Ketron® Sterra™ 1000 PEEK portfolio, featuring recycled content for a reduced carbon footprint compared to non-recycled materials.

Ertalon® 6PLA / Nylatron® MC 907 is a high-performance, unmodified cast nylon 6 grade that offers exceptional strength, hardness, creep resistance, and heat aging properties. This grade is also FDA and EU food contact compliant, making it ideal for use in the food processing and packaging industry.Features:High mechanical strength, stiffness, and hardnessGood resistance to creep, wear, fatigue, and heat agingGood sliding properties and machinabilityElectrical insulation and resistance to gamma and x-ray radiationBenefits:Can withstand high loads and extreme temperaturesProvides reliable performance in harsh environmentsEasy to machine for custom applicationsSafe for use in food contact applicationsApplications:Gears, rollers, wheels, bearings, and conveyor wear parts in the food processing and packaging industryOther applications that require high strength and hardness, such as sleeve and slide bearings, wear pads, rollers, pulleys, scrapers, gear wheels, sprockets, star wheels, and insulators.

Duratron® U2200 PEI Polyetherimide shapes, a high-performance plastic that offers exceptional rigidity, dimensional stability, high temperature resistance, and a low Coefficient of Linear Thermal Expansion. With 20% glass-reinforcement, Duratron® U2200 PEI is a versatile and durable material that is suitable for a wide range of applications.Features:20% glass-reinforced for exceptional rigidity and dimensional stabilityHigh temperature resistanceLow Coefficient of Linear Thermal ExpansionExceptional strength-to-weight ratio and increased tensile strengthGreat electrical insulatorBenefits:Versatile and durable material that can withstand harsh conditionsIdeal for semiconductor and electronics applications where dimensional stability, low thermal expansion and electrical insulation is importantSuitable for a wide range of applicationsApplications:Semiconductor and electronics applicationsElectrical insulationApplications that require dimensional stability, high temperature resistance and low thermal expansionDuratron® U2200 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions. Whether you are looking to improve the performance of your semiconductor and electronics applications or need a material that can withstand high temperatures and harsh environments while providing electrical insulation, Duratron® U2200 PEI is the ideal solution.

Nylatron® GS PA66 is a premium grade of Polyamide PA66, reinforced with Molybdenum Disulphide (MoS2) to enhance its mechanical properties. This unique combination of materials offers outstanding strength, rigidity, and a lower coefficient of linear thermal expansion than other nylon products.Features:High mechanical strength, stiffness, hardness, and toughnessGood fatigue resistanceHigh mechanical damping abilityGood sliding propertiesExcellent wear resistanceGood electrical insulating propertiesGood resistance to high energy radiation (gamma and X-rays)Good machinabilityBenefits:Maintains fits and clearances, reducing the likelihood of seizing as bearingsEnhanced bearing and wear properties due to MoS2Excellent performance in high-precision applicationsApplications:Ideal for use in bushings, bearings, roller wheels, pulleys, sheaves, wear pads, valve seats, and seals in construction and heavy equipment industries.Can also be used in other high wear and load-bearing applications.Nylatron® GS PA66 is a superior choice for applications that require high strength, rigidity and wear resistance, making it a perfect solution for construction and heavy equipment industries.

Duratron® D7015G PI Polyimide is a high-performance bearing grade material that offers exceptional temperature and wear resistance. With a low coefficient of friction, this material is ideal for use in applications where high loads and speeds are a critical factor.Features:15% graphite added for long wear and frictionSuperior temperature and wear resistanceLow coefficient of frictionMaintains performance abilities with or without lubricationBenefits:Excellent choice for bearing, bushing, and seal applications where higher loads or speeds are a significant factorProvides long-lasting performance in harsh environmentsLow maintenance and long-lasting partsApplications:Bearings and bushings in high-temperature environmentsSeals for high-speed or high-load applicationsMachine parts and components in harsh environments where temperature and wear resistance are needed.

Duratron® T4501 PAI Polyamide-imide is a high-performance plastic known for its exceptional compressive strength and excellent wear resistance. This grade is ideal for general purpose wear and friction applications, and is able to endure harsh thermal, chemical, and stress conditions.Features:High compressive strengthExcellent wear resistanceAble to endure harsh thermal, chemical, and stress conditionsSimilar in composition to Duratron® T4301 PAIAvailable in larger shapes or componentsBenefits:Can carry more loadReliable solution for general purpose wear and friction applicationsSuitable for a wide range of applications that require high strength and durabilityApplications:General purpose wear and friction partsLarge shapes and componentsApplications that require high strength and durability such as industrial machinery, automotive and aerospace.

Nylatron® GS PA66 is a premium grade of Polyamide PA66, reinforced with Molybdenum Disulphide (MoS2) to enhance its mechanical properties. This unique combination of materials offers outstanding strength, rigidity, and a lower coefficient of linear thermal expansion than other nylon products.Features:High mechanical strength, stiffness, hardness, and toughnessGood fatigue resistanceHigh mechanical damping abilityGood sliding propertiesExcellent wear resistanceGood electrical insulating propertiesGood resistance to high energy radiation (gamma and X-rays)Good machinabilityBenefits:Maintains fits and clearances, reducing the likelihood of seizing as bearingsEnhanced bearing and wear properties due to MoS2Excellent performance in high-precision applicationsApplications:Ideal for use in bushings, bearings, roller wheels, pulleys, sheaves, wear pads, valve seats, and seals in construction and heavy equipment industries.Can also be used in other high wear and load-bearing applications.Nylatron® GS PA66 is a superior choice for applications that require high strength, rigidity and wear resistance, making it a perfect solution for construction and heavy equipment industries.

Nylatron® FST Polyamide PA66 is a fire, smoke, and toxicity retardant engineering plastic that is designed to withstand extreme temperatures up to 347° F / 175° C. This grade is JAR / FAR 25.853 compliant, making it the first engineering plastic to achieve this standard. It is specifically developed for aircraft interior environments and is often used as a replacement for metal parts in various applications such as brackets, seal bushings, slide rails, and duct seals.Features:Fire, smoke, and toxicity retardantWithstands temperatures up to 347° F / 175° CJAR / FAR 25.853 compliantBenefits:Provides superior fire safety for aircraft interior environmentsCan withstand extreme temperatures, making it suitable for high-temperature applicationsMeets industry standards for fire and smoke safety, making it a reliable and safe choice for various applicationsApplications:Aircraft interior environmentsBracketsSeal bushingsSlide railsDuct sealsOther high-temperature and fire safety applications.

Ketron® 1000 Injection Molded (IM) Polyetheretherketone PEEK shapes are the perfect solution for applications that require excellent chemical, corrosion and wear resistance across a wide range of operating temperatures. These advanced engineering plastics are ideal for use in the oil and gas industry, where they are often specified for back-up seal rings and v-seals.   Key features: Very high maximum allowable service temperature in air (250 °C continuously, up to 310 °C for short periods of time) High mechanical strength, stiffness and creep resistance, even at elevated temperatures Excellent chemical and hydrolysis resistance Excellent wear and frictional behavior Very good dimensional stability Excellent resistance to high energy radiation (gamma- and X-rays) Inherent low flammability and very low levels of smoke evolution during combustion   Benefits: Can withstand harsh environments and high temperatures Exceptional toughness and impact strength Sterilizable by all conventional sterilization methods Complies with EU and US regulations for food contact Available in "Food Grade" natural and black color options   Applications: Back-up seal rings and v-seals in the oil and gas industry Bearings, bushings and gears in food processing equipment High temperature seals, gaskets and washers in chemical processing equipment Medical device components and implants Aerospace and automotive components

Nylatron® GF30 and Ertalon® 66 GF30 - the ultimate solution for high-performance industrial applications. Our heat-stabilized, 30% glass fiber-reinforced polyamide PA66 offers a unique combination of increased strength, stiffness, creep resistance, and dimensional stability while maintaining its exceptional wear resistance properties.Features:High mechanical strength, stiffness, hardness and toughnessGood fatigue resistanceHigh mechanical damping abilityGood sliding properties and excellent wear resistanceGood electrical insulating propertiesGood resistance to high energy radiation (gamma and X-rays)Good machinabilityBenefits:Ideal for sleeve and slide bearings, wear pads, rollers, pulleys, scrapers, gear wheels, sprockets, star wheels, and insulatorsCan withstand high maximum service temperaturesOffers lower maintenance costs and longer service lifeEasy to machineApplications:Sleeve and slide bearingsWear padsRollersPulleysScrapersGear wheelsSprocketsStar wheelsInsulatorsUpgrade your industrial components with Nylatron® GF30 and Ertalon® 66 GF30 for improved strength, durability, and performance in even the toughest of environments."

Techtron® PSBG is a high-performance polymer that combines the excellent chemical and corrosion resistance of Polyphenylene Sulfide (PPS) with the added strength and durability of carbon fiber reinforcement. This compression-molded material is internally lubricated and designed to excel in wear applications where an electrically conductive material is required.Key features:Excellent wear resistance: internally lubricated and carbon fiber-reinforced, allowing it to withstand high loads and minimize wear and tearOutstanding dimensional stability: minimal moisture absorption and low coefficient of linear thermal expansion, making it easy to maintain tight tolerancesExtreme chemical and corrosion resistance: ideal for use in demanding environmentsLow coefficient of linear thermal expansion: making it suitable for applications where dimensional stability is criticalElectrically conductive: ideal for wear applications that require electrical conductivityBenefits:Improved performance and durability of components in demanding environmentsIncreased resistance to chemicals, corrosion and wearEnhanced precision and dimensional stabilityImproved electrical conductivityApplications:Bushings and bearings, lantern rings, and pump wear components in the oil and gas industryElectrical components as it is electrically conductiveAutomotive and aerospace components as it can withstand high temperatures.Wear-resistant components in general, as it is internally lubricated and reinforced with carbon fiberTechtron® PSBG is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in a range of shapes and sizes, making it easy to incorporate into your designs.

Acetron® AF Blend POM-H - the ultimate solution for enhanced wear resistance in conveying and material handling applications. Made from PTFE-filled Homopolymer, Acetron® AF offers a unique combination of properties that make it stand out from other acetal grades. With a low coefficient of friction and great wear performance in wet environments, this material is perfect for bushings, bearings, electrical components, and rollers.Features:Enhanced wear resistanceLow coefficient of frictionGreat wear performance in wet environmentsLow moisture absorptionBenefits:Operates at higher speeds with reduced wearDimensional stability even in wet environmentsSuitable for food-contact applicationsApplications:Conveying and material handling environmentsBushings, bearings, electrical components, and rollers.

Ertacetal® C POM-C / Acetron® GP Polyoxymethylene POM-C is a general purpose, copolymer acetal grade that is known for its porosity-free nature and low moisture absorption. These POM-C shapes also offer excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments.Features:Porosity-free materialLow moisture absorptionExcellent machinabilityBenefits:Suitable for use in food contact and medical applicationsMeets FDA, NSF, Canada AG, and SSI Standard compliance requirementsCan be used in a variety of environmentsApplications:Food processing and packaging equipmentMedical and diagnostic equipmentBearings and bushingsGears and electrical componentsValves and fluid handling components

Techtron® PSGF PPS is a high-performance polymer that combines the excellent chemical and corrosion resistance of Polyphenylene Sulfide (PPS) with the added strength and stiffness of glass fiber reinforcement. This compression-molded material is designed to excel in structural applications where dimensional stability and resistance to harsh environments are required.Key features:Extreme dimensional stability: minimal moisture absorption and low coefficient of linear thermal expansion, making it easy to maintain tight tolerances.Chemical and corrosion resistance: suitable for use in demanding environments and harsh chemicals.Glass fiber reinforced: increased strength and stiffness, ideal for structural componentsHigh temperature resistance: can withstand high temperatures and maintain stability.Benefits:Improved performance and durability of components in demanding environmentsIncreased resistance to chemicals, corrosion and wearEnhanced precision and dimensional stabilityImproved strength and stiffnessApplications:Structural components such as pump housings, valves, and compressors in the oil and gas industryAutomotive and aerospace components as it can withstand high temperatures.Industrial and chemical processing applications where chemical resistance and dimensional stability is needed.General structural components where increased strength and stiffness is neededTechtron® PSGF is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in a range of shapes and sizes, making it easy to incorporate into your designs.

Duratron® U2100 PEI Polyetherimide shapes, a high-performance plastic that offers exceptional rigidity, dimensional stability, and a low Coefficient of Linear Thermal Expansion. With 10% glass-reinforcement, Duratron® U2100 PEI is a versatile and durable material that is suitable for a wide range of applications.Features:10% glass-reinforced for great rigidity and dimensional stabilityLow Coefficient of Linear Thermal ExpansionExcellent strength-to-weight ratio and tensile strengthBenefits:Versatile and durable material that can withstand harsh conditionsIdeal for semiconductor and electronics applications where dimensional stability and low thermal expansion is importantSuitable for a wide range of applicationsApplications:Semiconductor and electronics applicationsApplications that require dimensional stability and low thermal expansionDuratron® U2100 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions. Whether you are looking to improve the performance of your semiconductor and electronics applications or need a material that can withstand high temperatures and harsh environments, Duratron® U2100 PEI is the ideal solution. Try it today and experience the difference for yourself!