Products results

SEMICOSIL® 911 A/B is a pourable, two-part silicone rubber that cures to a soft silicone gel through addition-curing. It has a 1:1 mixing ratio and demonstrates thixotropic behavior. This product offers rapid heat curing and forms a soft gel during vulcanization. SEMICOSIL® 911 A/B has a low volatile and uncured polymer content. It maintains almost constant properties within a wide temperature range, from -40 °C to +180 °C. Additionally, it boasts a low ion content.

POWERSIL® 466 A/B is a ready-to-use, two-component system of liquid silicone rubber. It exhibits medium conductivity and offers stable electrical properties along with good mechanical properties. The material is characterized by high elongation at break and low tension set, ensuring flexibility and durability in applications.

POWERSIL® Paste AP is an opaque to whitish paste with a medium consistency. It exhibits good values for electrical insulation, permittivity, and dielectric strength. Additionally, POWERSIL® Paste AP shows minimal swelling of silicone elastomers it comes in contact with, thanks to the utilization of a special phenyl-silicone oil.

POWERSIL® 590 is a purpose-built, thermally stabilized, one-component silicone sealant with a retarded curing process. Its low viscosity makes it easy to cast, and it offers primerless adhesion. This protective silicone sealant is specifically designed for cable jointing applications. In the absence of moisture, POWERSIL® 590 remains in a liquid state for an extended period, preventing the formation of voids.

ELASTOSIL® R Plus 4360/60 MH is a two-component, high consistency silicone rubber specifically designed for the manufacture of extruded articles. The vulcanizates produced using this silicone rubber exhibit excellent elasticity (rebound resilience) and demonstrate good tear resistance. In comparison to other platinum curing grades like the ELASTOSIL® R plus 4305 series, ELASTOSIL® R Plus 4360/60 MH showcases improved physical resistance.

POWERSIL® 732 CS A/B is a two-component, liquid silicone rubber that offers excellent processing properties. The resulting vulcanizates exhibit exceptional mechanical and electrical properties. This product is specifically designed for cold-shrink applications and provides excellent dielectric properties. It is highly suitable for outdoor applications, offering UV and weathering resistance as well as excellent hydrophobic properties.

GENIOSIL® XL 10 is an alkoxyvinyl silane compound. When exposed to moisture, the silane undergoes hydrolysis, resulting in the release of methanol. This hydrolysis process leads to the formation of silanols, which have the ability to react with each other and form siloxanes. The applications of GENIOSIL® XL 10 include marine and protective coatings, plastic additives, and plastic crosslinking.

POWERSIL® 190 MH is a one-component silicone rubber compound that is peroxide-curing and ready to use. It is specifically formulated for high voltage applications. When used to extrude or mold insulators, POWERSIL® 190 MH provides excellent resistance to arcing and tracking. This enhanced resistance helps improve the reliability of electrical systems and reduces power interruptions.

POWERSIL® 3500 MH is a high-temperature vulcanizing (HTV) silicone rubber, used as an addition-curing one-component compound for the production of press-cured articles. The resulting vulcanized products are resistant to tracking and display good to very good mechanical properties. The compound does not release any peroxide split products during cure or post-cure processes. The curing system is significantly faster compared to peroxide-curing materials; cure time can be reduced by 30-50%, depending on the wall thickness.

HDK® H30 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H30 finds application as a thickening and thixotropic agent in various industries including coatings, printing inks, adhesives, cosmetics, and others. Additionally, it is utilized as a reinforcing filler in elastomers, specifically silicone-elastomers. Moreover, HDK® H30 acts as a free flow additive in the production of powder coatings.

ELASTOSIL® R Plus 5305/70 is a platinum-catalyzed, addition-curing, two-part silicone rubber specifically designed for the manufacturing of extruded articles. Cured articles exhibit excellent transparency and very good mechanical properties. This silicone rubber is suitable for applications such as ignition and battery cables, utilizing addition curing and two-component systems.

POWERSIL® 740 Dark Gray A/B is a paste-like, two-component compound with short curing times. It is designed to form vulcanizates with exceptional properties, including high tracking and erosion resistance. The material exhibits excellent mechanical properties, particularly high tear strength, and demonstrates outstanding dielectric behavior.

POWERSIL® 311 MH is a one-component, ready-to-use peroxide curing compound. It cures to form an electrically insulating silicone elastomer with high erosion resistance. This product is specifically recommended for the production of electrical insulating equipment used outdoors, such as composite insulators, arrester housings, bushings, and more. It is particularly suitable for extruded parts that are cured in the air.

POWERSIL® 464 A/B is a ready-to-use, two-component system of electrically conductive liquid silicone rubber. It exhibits medium conductivity and possesses good electrical and mechanical properties. It is specifically designed with excellent bonding features on RTV-2 rubber, ensuring stable electrical properties and reliable mechanical performance.

POWERSIL® 740 Light Gray A/B is a paste-like, two-component compound with short curing times. When cured, it forms vulcanizates that exhibit remarkable properties such as high tracking and erosion resistance. The material also demonstrates good mechanical properties, including high tear strength, and exhibits excellent dielectric behavior.

POWERSIL® 415 MH is a high-permittivity, high-consistency silicone rubber specifically designed for the production of refractive field control devices for cable accessories. This ready-to-use material is suitable for all types of molding applications and ensures optimal performance in the production of cable accessories requiring refractive field control.

WACKER® Silicone Paste P is a translucent, vaseline-like paste that has a relatively stiff consistency and provides water repellency. When applied to parts, WACKER® Silicone Paste P offers excellent water repellency, which helps protect against corrosion. The paste also becomes softer when subjected to shear stress or other mechanical stress, such as kneading. This softening effect often makes the processing of the paste easier.

ELASTOSIL® LR 3003/30 R A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time. Its vulcanizates are noted for their high transparency and excellent mechanical properties.

WACKER® Silicone Paste P 250 is an opaque paste with a medium consistency and slight thixotropic properties. It possesses good electrical properties, including insulation, relative permittivity, and electric strength. Additionally, it exhibits strong adhesion to metals and ceramic materials. When applied as a coating, WACKER® Silicone Paste P 250 provides excellent water repellency, offering a certain level of protection against corrosion. The paste's low viscosity makes it easy to use as an embedding compound, release agent, or lubricant in various applications.

ELASTOSIL® R 757/60 is a high-consistency silicone rubber (HCR) known for its exceptional resistance to hot air, especially when a heat stabilizer is added. The material exhibits excellent tear resistance, a low compression set, and high elasticity. It is suitable for use in appliance cables that comply with UL 758 and have a temperature rating of 250 oC.

POWERSIL® Fluid TR 50 is a fully synthetic silicone fluid that is nonvolatile and noncorrosive. It possesses a high fire point and exhibits virtually self-extinguishing behavior, significantly reducing the fire hazard compared to conventional transformer fluids. This fluid demonstrates exceptional thermal stability, even in the presence of air, enabling higher thermal utilization when compared to other liquid coolants.

ELASTOSIL® LR 3043/40 A/B A/B is a liquid silicone rubber of the ELASTOSIL® LR 3043 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

HDK® T30 is a hydrophilic, synthetic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. HDK® T30 is a white colloidal powder of high purity. It finds application in inkjet paper, make-up, powder coatings, printing inks, and rheology control.

SEMICOSIL® 989/1K is a one-part, ready-to-use silicone rubber that cures through thermal curing. It is non-slumpy and exhibits thixotropic properties, making it easy to handle and apply. This transparent silicone rubber has a medium hardness, providing a balance between flexibility and rigidity. It cures rapidly with heat and offers primerless adhesion to a wide range of substrates.

Dynasylan® SIVO 214 is an aminofunctional silane composition with enhanced crosslinking activity. It serves as an adhesion promoter, facilitating bonding between inorganic materials (such as glass, metals, fillers) and organic polymers (including thermosets, thermoplastics, elastomers). Additionally, it functions as a surface modifier and supports chemical modification of various substances.

VESTAMID® L1833 BK 9.7623 is a 23% glass fiber-reinforced, easily demoldable, and heat-stabilized polyamide 12 compound. This compound is specifically formulated to provide efficient production of injection molded parts with short cycle times, thanks to its excellent mold release properties. VESTAMID® L1833 BK 9.7623 is supplied as cylindrical granules, conveniently packaged in moisture-proof bags, ensuring optimal storage conditions. Experience the reliability and performance of VESTAMID® L1833 BK 9.7623 in your injection molding applications. This compound, with its glass fiber reinforcement, offers enhanced strength and rigidity, while its demolding characteristics and heat stability contribute to efficient production. Choose VESTAMID® L1833 BK 9.7623 for its exceptional properties, ease of processing, and suitability for a wide range of injection molded parts.

Dynasylan® GLYMO is a bifunctional organosilane, featuring a reactive organic epoxide and hydrolyzable inorganic methoxysilyl groups. This dual reactivity empowers Dynasylan® GLYMO to chemically bond with both inorganic materials (e.g., glass, metals, fillers) and organic polymers (such as thermosets, thermoplastics, elastomers). It functions as an adhesion promoter, crosslinking agent, and surface modifier.

Dynasylan® HYDROSIL 2776 is an advanced organosilane that transforms surfaces. As a versatile surface modifier and crosslinking agent, it excels in various applications. With its VOC-free composition, it enhances adhesion and coupling. This product is a game-changer for building materials, electrical components, and elastomers. Experience improved processability and exceptional performance in cables, laminates, and pipes with Dynasylan® HYDROSIL 2776.

VESTODUR® 3030 is a high-viscosity polybutylene terephthalate (PBT) resin that is specially formulated for extrusion applications. It provides outstanding resistance to hydrolysis and heat. This compound is particularly suitable for the production of rigid, small-diameter tubing, including loose fiber optic buffer tubes. It is also compatible with film extrusion processes.

Dynasylan® VTEO is a bifunctional organosilane, boasts a reactive vinyl group and a hydrolyzable inorganic triethoxysilyl group. With its dual reactivity, Dynasylan® VTEO forms chemical bonds with both inorganic materials (e.g., glass, metals, fillers) and organic polymers (including thermosets, thermoplastics, elastomers). This compound serves as a crosslinking agent, adhesion promoter, and surface modifier, providing versatile applications.

VESTAKEEP® 4000 FP is an unreinforced, high-viscosity polyether ether ketone fine powder. It can be used as a basic resin or blended with different additives for manufacturing compression molding parts. This semi-crystalline polymer exhibits excellent thermal and chemical resistance. VESTAKEEP® 4000 FP has low flammability.

VESTAKEEP® 4000 P is an unreinforced, high-viscosity polyether ether ketone powder. It can be used for manufacturing compounds or as a scatter powder for composites. The semicrystalline polymer offers superior thermal and chemical resistance. VESTAKEEP® 4000 P has low flammability.

VESTAKEEP® L 4000 G is a high-viscosity, unreinforced, lubricated polyether ether ketone suitable for injection molding and extrusion. The semicrystalline polymer offers superior thermal and chemical resistance. Parts made from VESTAKEEP® L 4000 G have low flammability and can be processed using standard machines for thermoplastics.

Dynasylan® GLYEO is a bifunctional organosilane, features a reactive organic epoxide and a hydrolyzable inorganic triethoxysilyl group. Its dual reactivity facilitates chemical bonding to both inorganic materials (e.g., glass, metals, fillers) and organic polymers (e.g., thermosets, thermoplastics, elastomers). Serving as an adhesion promoter, crosslinking agent, and surface modifier, Dynasylan® GLYEO is a colorless, low-viscosity liquid with a subtle terpentine-like odor. It readily dissolves in alcohols, ketones, and aliphatic and aromatic hydrocarbons.

VESTAMID® L2124 NC is a plasticized, heat- and light-stabilized polyamide 12 compound specially designed for the extrusion of flexible tubing and hoses, particularly for oil and petrochemical applications. This compound conforms to DIN 73 378, Type: PA 12-PHL, for tubing. VESTAMID® L2124 NC is characterized by its high melt viscosity and excellent dimensional control during pipe extrusion. Compounds based on PA12 demonstrate minimal variation in properties with changing humidity due to their low moisture absorption. Parts made from this semi-crystalline material exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance. Choose VESTAMID® L2124 NC for its reliable performance, versatility, and exceptional properties, ensuring the durability and reliability of your flexible tubing and hose applications.

VESTAMID® L2140 BK 9.7504 is a heat- and light-stabilized polyamide 12 compound designed for extrusion of tubing and semi-finished products such as fuel lines. The properties of this material are minimally affected by changing humidity due to its low moisture absorption. Parts made from this semi-crystalline material exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance.