Products

XTEND® 818+ is good for high production parts with gel coat.It is used or polyester or vinyl ester Good gloss and no pre-release

MoldWiz® INT-1850HT - A process aid additive and mold release with anti-static properties which is incorporated directly into the resin eliminating the need for an external mold release agent. Improves resin flow and line speeds. An effective addition of process aid additive will not have any adverse effect on the cured resin. The complex polymeric nature of the process aid additive will not interfere with secondary operations such as decorating, silk screen printing, painting, bonding, or plating

MoldWiz® INT-1890M - A process aid additive and mold release with anti-static properties which is incorporated directly into the resin eliminating the need for an external mold release agent. FRP molds require a surface coating to seal the porosity and maintain the gloss. An effective addition of process aid additive will not have any adverse effect on the cured resin. The complex polymeric nature of the process aid additive will not interfere with secondary operations such as decorating, silk screen printing, painting, bonding or plating

MoldWiz® PU-13RX - A Liquid mold release agent that is ideally suited for molding polyurethane foam, polymer concrete and other composites molding applications. May be used with FRP or metal molds and is ideal for porous tooling, effectively sealing the surface and contributing to smoother parts. Easier and less time consuming to use and less likely to build up than conventional paste wax release.

MoldWiz® WB-2700 - A liquid external release agent that dries at room temperature forming a monomolecular film which adheres by absorption to the mold surface and has no affinity for the molded resin or rubber. This selective adhesion prevents the film from being easily abraded by the demolded part. Numerous demoldings per application of release agent can be expected without any necessity for washing the parts. The release will not interfere with secondary finishing operations such as decorating, bonding, or painting.

XTEND® 19ZAM - An air-drying reactive resin solution that cures to a cross-linked semi-permanent coating, which provides multiple release without transfer.

MoldWiz® 249-B41 is a liquid external release agent that dries at room temperature forming a monomolecular film which adheres by absorption to the mold surface and has no affinity for the molded resin or rubber. This selective adhesion prevents the film from being easily abraded by the demolded part. Numerous demoldings per application of release agent can be expected without any necessity for washing the parts. The release will not interfere with secondary finishing operations such as decorating, bonding, or painting.

MoldWiz® WB-GR50 - A water based external release agent that dries at room temperature forming a monomolecular film which adheres by adsorption to the mold walls and has no affinity for the resin. This selective adhesion prevents the film from easily being torn off by the demolded part. Will not interfere with any secondary operations such as decorating, bonding, or painting

MoldWiz® AZN - A liquid external release agent that dries at room temperature forming a mono-molecular film which adheres by absorption to the mold walls and has no affinity for the resin. This selective adhesion prevents the film from easily being torn off by the demolded part resulting in numerous demoldings per release application. Without any necessity for washing the parts. Will not interfere with secondary operations such as decorating, bonding, or painting.

MoldWiz® INT-120IMC - A process aid additive and mold release with anti-static properties which is incorporated directly into the in-mold coating. It can eliminate the need for an external mold release agent on steel and aluminum molds. Composite molds require a mold release agent to seal the porosity and maintain the gloss of the molds. The complex polymeric nature of the process aid additive will not interfere with secondary operations such as bonding.

MoldWiz® EM-1212SF2 - A water-based external release agent with anti-rusting properties that dries at room temperature forming a monomolecular film which adheres by absorption to the mold walls and has no affinity for the resin or rubber. This selective adhesion prevents the film from easily being torn off by the demolded part resulting in numerous demoldings per release application without any necessity for washing the mold. Will not interfere with any secondary operations such as decorating, bonding, or painting.

XTEND® W-3236 - A semi-permanent, aqueous emulsion, external mold release agent that forms a uniform cured film on drying. Selective adhesion on the mold surface prevents the film from being torn off with de-molding.

XTEND® 19RSS - An air-drying reactive resin solution that cures to a cross-linked semi-permanent coating, which provides multiple release without transfer.

MoldWiz® WB-B25 is 100% water-based. Highly economical. 20% active – dilute with water up to 30:1.Brake pads and clutch plates used on all types of metal molds for compression molding abrasive mixes with, epoxy; phenolic; MMA; polyester; or rubber binders.

MoldWiz® INT-1854 - A process aid additive and mold release with anti-static properties which is incorporated directly into the resin eliminating the need for an external mold release agent. Improves resin flow and line speeds. An effective addition of process aid additive will not have any adverse effect on the cured resin. The complex polymeric nature of the process aid additive will not interfere with secondary operations such as decorating, silk screen printing, painting, bonding or plating.

MoldWiz® EM-606SFL - A water-based external release agent with anti-rusting properties that dries at room temperature forming a monomolecular film which adheres by absorption to the mold walls and has no affinity for the resin or rubber. This selective adhesion prevents the film from easily being torn off by the demolded part resulting in numerous demoldings per release application without any necessity for washing the mold. Will not interfere with any secondary operations such as decorating, bonding, or painting.

MoldWiz® WB-4606 - A water-based external release agent that adheres to the mold walls and has no affinity for the resin. Multiple releases for each application can be achieved.

MoldWiz® INT-1858 is a processing aid additive and mold release with anti-static properties which is incorporated directly into the resin or gel coat eliminating the need for an external mold release agent. An effective addition of process aid additive will not have any adverse effect on the cured resin. The complex polymeric nature of the process aid additive will not interfere with secondary operations such as decorating, silk screen printing, painting, bonding, or plating.

MoldWiz® INT-326PWD - A process aid additive and mold release with anti-static properties, which is incorporated directly into the resin eliminating the need for an external mold release agent. An effective addition of process aid additive will not have any adverse effect on the cured resin. The complex polymeric nature of the process aid additive will not interfere with secondary operations such as decorating, silk screen printing, painting, bonding, or plating.

XTEND® W-102 - A 100% water-based is used to wipe on and polish off at ambient temperature in FRP mold release. XTEND® W-102 yields high gloss when applied over XTR sealer.

XTEND® 19RBU - An air-drying reactive resin solution that cures to a cross-linked semi-permanent coating, which provides multiple release without transfer.

MoldWiz® WB-640ET - A liquid external release agent that dries at room temperature forming a mono-molecular film which adheres by absorption to the mold walls and has no affinity for the resin. This selective adhesion prevents the film from easily being torn off by the demolded part resulting in numerous demoldings per release application without any necessity for washing the mold. Will not interfere with any secondary operations such as decorating, bonding, or painting.

MoldWiz® EM-1212 - A water-based external release agent that dries at room temperature forming a monomolecular film which adheres by adsorption to the mold walls and has no affinity for the resin. This selective adhesion prevents the film from easily being torn off by the demolded part resulting in numerous demoldings per release application without any necessity for washing the mold. Will not interfere with any secondary operations such as decorating, bonding, or painting.

MoldWiz® INT-PS125 - A process aid additive and mold release with anti-static properties which is incorporated directly into the resin eliminating the need for an external mold release agent. Improves resin flow and line speeds. An effective addition of process aid additive will not have any adverse effect on the cured resin. The complex polymeric nature of the process aid additive will not interfere with secondary operations such as decorating, silk screen printing, painting, bonding or plating.

XTEND® 858 - An air-drying external mold release. It cures to a semipermanent coating, which provides multiple releases without transfer.

MoldWiz® INT-1846N2 - A process aid additive and mold release with anti-static properties which is incorporated directly into the resin eliminating the need for an external mold release agent. Improves resin flow and line speeds. An effective addition of process aid additive will not have any adverse effect on the cured resin. The complex polymeric nature of the process aid additive will not interfere with secondary operations such as decorating, silk screen printing, painting, bonding or plating