Products

Pangel B42 is an organically modified sepiolite powdered additive with a high thickening and anti-settling capacity for high polarity systems, particularly recommended for systems based on alcohol, glycol and ketone type solvents, as well as in mixtures of those with water.

Pangel B40 is a powdered additive with a high thickening and anti-settling capacity for high-polarity systems. It is especially recommended for adding thixotropic, suspension, and sagging resistance properties to systems based on alcohol, glycol, and ketone solvents, as well as mixtures of those solvents with water.

Pangel OM8 is a rheological additive for low- to medium-polarity systems based upon highly purified bentonite clay. It is particularly recommended for systems based on resins such as polyurethanes, acrylics, polyesters, epoxy esters, and alkyds. Pangel OMD8 is an organobentonite that enhances thixotropic and pseudoplastic effects in systems with intermediate polarity.

AFCONA 5209 is an anionic/cationic wetting and dispersing additive used to improve the wetting of pigment surfaces. AFCONA 5209 is the 100% version of AFCONA 5009. It reduces the interfacial tension between pigments or extenders and the vehicle. It stabilizes the pigments through electrical charge repulsion forces.

Crys-Talc® 4H-4HC is a high-purity, high-brightness, platy, medium-sized talc used in interior and exterior coating, adhesive, and sealant formulations to reduce hard settling, improve sag resistance, and maximize prime pigment extension. Crys-Talc® 4H is used in solid-color and semitransparent wood stains to prevent tannin bleed and improve gloss uniformity without introducing abrasive characteristics. Crys-Talc® 4H has a platy, hydrophobic structure used in  architectural and industrial primers to improve barrier properties which impart corrosion resistance and stain blocking  ability.

AFCONA 5244 is the nearly 100% active solid version of AFCONA 5044, designed for high-solid systems where the presence of solvents must be limited. When used at the same level of active solids, the properties of AFCONA 5244 and AFCONA 5044 are almost identical.

AFCONA 3755 is a leveling and flow control agent for solvent-based coatings with very effective defoaming properties. It is a pure polyacrylic leveling agent, designed for applications where leveling and defoaming are both important, such as coil and can coatings. It can also be used in other foam-sensitive systems.

Syntran® 3106 is based on a patented bimodal technology with film-forming properties. This technology combines two different ionic structures in the same polymer network, increasing the adhesion to multiple substrates. This technology allows a formulator to take advantage of the good aspects of cationic acrylic without the traditional compatibility issues.

Nicron® 353 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 353 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers to improve corrosion resistance and stain-blocking ability. Nicron® 353 is also used for rheology and film reinforcement in adhesive, sealant, caulk, joint compound, wood putty, and auto body patch applications.

ASCONIUM® 142DA can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.

ASCONIUM® 112 can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.

Lo-Vel® 6200 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

Inhibisil® 73 anti-corrosion pigment is a calcium oxide-containing synthetic amorphous silicon dioxide. It is designed for use where thin film anti-corrosive protection is needed. Its high calcium oxide content, ease of dispersion, and high Hegman value provide formulation flexibility and expanded process capability.

Lo-Vel® 275 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

AFCONA 2050 is a strong defoamer for most solvent-based coatings. AFCONA 2050 offers very strong defoaming and anti-foam performance with good compatibility in many resin systems. It is suitable for solvent-based coatings, printing inks and thermosetting resin systems. The product eliminates foam and blistering, regardless of whether the air bubbles are caused by the substrate.

Lo-Vel® 2010 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

AFCONA 5009 is an anionic/cationic wetting and dispersing additive that improves the wetting of pigment surfaces, reducing the interfacial tension between pigments or extenders and the vehicle. It is an economy grade of additive and stabilizes the pigments through electrical charge repulsion forces.

JetFil® P350 is an off-white, high-purity, extremely platy talc with more than 98% talc content. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastics applications. JetFil® P350 could also help in achieving good long-term thermal stability (heat aging).

Mistron® 403 is a high-purity, platy, microcrystalline talc. In architectural and industrial primers, it provides barrier properties to improve corrosion resistance and stain-blocking ability. Mistron® 403 also prevents tannin bleed and improves gloss uniformity in solid-color and semi-transparent stains. In sealant formulations, Mistron® 403 enhances film strength and flexibility.

Synprint AC 5151 is an acrylic polymer based on multiphase technology. This is a proprietary process that combines two different types of polymers in the same polymer network. It allows a balanced combination and an overall improvement of the physical properties of the two polymers. Synprint AC 5151 forms a film with very high gloss, blocking resistance, rub resistance, and printability with various types of inks. It also exhibits excellent adhesion to various substrates.

Dar-Tech Portaryte® D80 is produced from carefully selected, naturally occurring off-white baryte. Dar-Tech Portaryte® D is successfully used in applications where excellent chemical inertness is required but high brightness and consistent color are less important, e.g., primers, sealants, and adhesives. The exceptionally high density of baryte makes Dar-Tech Portaryte® D an economical filler of choice for sound deadening in automotive and domestic applications (e.g. sewer pipes). The quality of Dar-Tech Portaryte® D is guaranteed by an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Syntran® DR 7055 is an alkali-soluble acrylic polymer that is based on Interpolymer Corporation's polymeric surfactant technology. This technology was designed to improve wetting and incorporation of pigments or additives into water-based inks, pigment concentrates, and coatings. This product is used for wood coatings, concrete coatings, architectural coatings, etc.

Inhibisil® 75 anti-corrosion pigment is a calcium oxide-containing synthetic amorphous silicon dioxide. It is designed for use where thin film anti-corrosive protection is needed. Its high calcium oxide content, ease of dispersion, and high Hegman value provide formulation flexibility and expanded process capability.

Mistron® 353 is a high-purity microcrystalline talc. Mistron® 353 is used in interior and exterior coating, adhesive, and sealant formulations to reduce hard settling, improve sag resistance, and maximize prime pigment extension. Mistron® 353 is used in solid-color and semi-transparent wood stains to prevent tannin bleed and improve gloss uniformity without introducing abrasive characteristics.

Dar-Tech Portaryte® D50 is produced from carefully selected, naturally occurring off-white baryte. Dar-Tech Portaryte® D is successfully used in applications where excellent chemical inertness is required but high brightness and consistent color are less important, e.g., primers, sealants, and adhesives. The exceptionally high density of baryte makes Dar-Tech Portaryte® D an economical filler of choice for sound deadening in automotive and domestic applications (e.g. sewer pipes). The quality of Dar-Tech Portaryte® D is guaranteed by an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Dar-Tech Portaryte® D15 is produced from carefully selected, naturally occurring off-white baryte. Dar-Tech Portaryte® D is successfully used in applications where excellent chemical inertness is required but high brightness and consistent color are less important, e.g., primers, sealants, and adhesives. The exceptionally high density of baryte makes Dar-Tech Portaryte® D an economical filler of choice for sound deadening in automotive and domestic applications (e.g. sewer pipes). The quality of Dar-Tech Portaryte® D is guaranteed by an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Nicron® 504 is a high-purity microcrystalline talc. The platy nature of Nicron® 504 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 504 is also used in paints to improve sag resistance and maximize prime pigment extension.

AFCONA 2020 is a very strong defoamer suitable for most solvent-based coatings, printing inks, and thermosetting resin systems. It eliminates foam and blistering, regardless of the source of the air bubbles. However, it is not suitable for transparent, high-gloss clear topcoats.

Dar-Tech Portaryte® D20 is produced from carefully selected, naturally occurring off-white baryte. Dar-Tech Portaryte® D is successfully used in applications where excellent chemical inertness is required but high brightness and consistent color are less important, e.g., primers, sealants, and adhesives. The exceptionally high density of baryte makes Dar-Tech Portaryte® D an economical filler of choice for sound deadening in automotive and domestic applications (e.g. sewer pipes). The quality of Dar-Tech Portaryte® D is guaranteed by an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

AFCONA 2038 is a highly compatible defoamer that does not cause in-can haziness. It prevents the formation of foam and blisters during the manufacturing and application of solvent-based wood finishes. This defoamer has excellent compatibility properties, making it especially suitable for use in clear coatings and high gloss coatings. Additionally, it is suitable for use in applications where dry film transparency is essential, such as when applying thick clear coatings by conventional spraying.

Lo-Vel® HSF belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

AFCONA 2018 is a silicone-free defoamer that is recommended for systems where in-can transparency is important. It prevents the entrapment of air during processing steps such as stirring or pumping, and functions well during the application of paints and lacquers. AFCONA 2018 is well-suited for solvent-based wood finishes where foaming is a problem when applied by spraying.

ASCONIUM® 140 can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.

JetFil® P500 is an off-white, high-purity, extremely platy, fine talc. It is recommended for improving stiffness, HDT, and dimensional stability in general-purpose plastics applications, including sheets and thermoformed plastics. It could also help in achieving good long-term thermal stability (heat aging).

LO-VEL® 8100 flatting agent is a high-efficiency flatting agent that is ideal for use in a variety of coating systems. It is a synthetic amorphous silicon dioxide, wax-treated silica designed for use where a Hegman value of 6 to 6.75 is required. Moreover, its high flatting efficiency, resistance to settling and heat-age stability provide formulation flexibility and expanded process capability.

AFCONA 3758 is a leveling and flow control agent for solvent-based coatings with anti-crater properties. AFCONA 3758 is a special modified polyacrylic polymer. It reduces drastically surface tension of organic coating systems. This, together with good compatibility in most solvent-based systems and with minimal foam stabilizing effect, makes it very effective as an anti-crater and flow control agent for all solvent-based coatings.