Products

LOPON® E 13 is a defoamer that is specifically designed for use in paints and plasters. It is mineral oil-free and silicone-free, making it an excellent choice for those who prefer alternative solutions. LOPON® E 13 provides a good long-term effect and has a wide range of applications. It is also highly compatible with different types of emulsions and has low sedimentation during storage. Additionally, LOPON® E 13 is compliant with BfR XIV and FDA regulations, ensuring its safety for use.

HALOX® 570 is an organic corrosion inhibitor designed for use in waterborne industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. HALOX® 570 is especially effective along weld seams and, in some cases, can also be used in solvent-based coatings and UV-cured systems. HALOX® 570 may be used in formulations based on waterborne acrylic latexes and co-polymers, styrene/acrylic latexes, acrylate epoxy esters, 2-pack epoxy systems, alkyds, alkyd/acrylic blends, and 1 or 2-pack polyurethane. HALOX® 570 may be used in both waterborne primers and direct-to-metal topcoats. In direct-to-metal coatings, HALOX® 570 has a minimal effect on gloss reduction.

HALOX® Z-PLEX® 250 is a white, non-refractive, corrosion-inhibiting pigment used in various protective coatings. It is classified as Zn3(PO4)2.2H2O (dihydrate) and is compliant with ASTM D6280, Specification for Zinc Phosphate Pigment Type I. The recommended loading levels for HALOX® Z-PLEX® 250 range from 5–10% based on the total formula weight.

HALOX® 650 is an organic corrosion inhibitor primarily designed for coatings and primers on metal surfaces. It is specifically formulated for use in solvent-borne or powder-coating applications to provide long-term corrosion protection. HALOX® 650 can be used in a variety of applications, including coil coatings, resins such as thermoplastic acrylics or epoxies, powder coating systems such as polyester or TGIC, acid-catalyzed thermosetting systems such as melamine or urea-formaldehyde, and wash (etch) primers based on PVB.

HALOX® FLASH-X® 150 is an effective liquid additive used in the manufacture of water-based protective coatings to inhibit flash rust and in-can rusting. Testing has demonstrated that HALOX® FLASH-X® 150 is highly effective at relatively low loading levels when compared to other flash and in-can rust inhibitors. It has also shown excellent flash rust inhibitive performance on various metal substrates, including iron, steel, galvanized iron, galvalume, and zincalume.

POLYRON® 322 NEW is a white, hygroscopic agglomerate dispersing agent designed for use in emulsion paints, plasters, and adhesives. Its dispersing action ensures that an optimal particle size is rapidly achieved, making it best suited as a dispersing agent for waterborne paints, especially emulsion paints. POLYRON® 322 NEW slows down sedimentation, reduces water hardness, and has a good binding capacity with respect to calcium and heavy metal ions.

HALOX® 630 is a liquid organic corrosion inhibitor for solvent-borne protective coatings on metal surfaces. It may be used in solventborne clear or pigmented coatings and in systems such as 2-pack epoxy systems, high-solids epoxy esters, alkyds, acrylic resins, and 2 pack polyurethane primers. However, in bake systems, the temperature should not exceed 150°C. It should be noted that yellowing may be observed with reactive isocyanates. HALOX® 630 provides superior corrosion resistance even over poorly prepared surfaces, such as adherent rust or oil contamination.

HALOX® 430 is a non-toxic, heavy metal-free anticorrosive pigment designed for use in waterborne and solventborne protective coating systems. HALOX® 430 is based on a unique synergy between an ion scavenging and passivation mechanism. It is recommended for use in long-term applications where the use of heavy metals, such as zinc, strontium, barium, molybdenum, and chromate, is of concern.

LOPON® DV is a white, crystalline powder that contains disodium phosphate and is designed to function as a corrosion inhibitor and afterglow suppressant for water-based paints. It is particularly effective as a corrosion inhibitor for emulsion paints and plasters. When binding iron ions, a recommended dosage of 5.0–7.5 mg of LOPON® DV per mg of iron is recommended.

HALOX® Z-PLEX® 750 is an inorganic and organic hybrid corrosion inhibitor primarily designed for coatings and primers on metal surfaces. HALOX® Z-PLEX® 750 is specifically designed for use in a variety of solventborne or waterborne applications to cost-effectively provide the traditional function of an inorganic corrosion inhibitor with the benefits of an organic corrosion inhibitor.

TARGON® 19 is a setting retarder containing sodium monofluorophosphate (Na2PO3F). This industrial additive is tailored for cement-based products, ensuring consistent mortar consistency during application and initial hours before setting. A reliable thickener, TARGON® 19 finds its utility in construction chemicals for both cement and mortar applications.

HALOX® BW-111 is a white, non-refractive pigment used as a corrosion inhibitor in protective coating systems. It is specifically recommended for use in solvent-borne epoxy systems, including both conventional and high-solids coatings. The recommended loading levels for HALOX® BW-111 range from 5–10% based on the total formula weight for conventional systems and from 10–20% based on the total formula weight for higher solids systems.

HALOX® BW-100 is a white, nonrefractive, tannin stain-inhibiting pigment used in protective coating systems and has been specifically designed as a tannin stain inhibitor, providing performance and compatibility in a variety of resin systems such as acrylic latexes, vinyl acrylic latexes, styrenated acrylic latexes, and solventborne alkyds.

HALOX® CZ-170 is a versatile pigment used in protective coating systems to inhibit corrosion and tannin staining. It is a great replacement for zinc oxide and can be used in high-gloss and thin-film applications due to its finer particle size and narrow distribution. With a gloss of over 75 units at 60° and a film thickness of less than 1.0 mils, or 25 microns, HALOX® CZ-170 is a great option for a variety of coating needs. It can be used to protect both metal and wood substrates, making it a universal option for coating systems.

LOPON® E 100 is a defoamer for glossy paints that is VOC-, mineral oil-, and silicone-free. It is designed to provide a high gloss on the paint surface while offering a long-term effect. With its wide range of applications, this product exhibits excellent compatibility with various types of emulsions. Additionally, it boasts low sedimentation, ensuring smooth and consistent performance.

HALOX® Zinc Phosphate is a white, non-refractive, corrosion-inhibiting pigment that is widely used in protective coating systems. It is also known as zinc phosphate-dihydrate and is characterized by a narrow particle size distribution, with an upper particle size limit of 10 microns and a mean particle size of 5 microns. This pigment is highly versatile and serves as a standard corrosion inhibitor for most high-performance resin systems, including vinyl, chlorinated rubbers, and epoxies. It is especially recommended for high acid-value resins, catalyzed baking systems, and vinylidene chloride latexes. In addition, HALOX® Zinc Phosphate is an ideal choice for thin film applications (less than 1 mil or 25 microns). It meets the ASTM D 6280-98 specification for zinc phosphate pigment type I and is widely used in the industry.

HALOX® 550 WF is a water-free (WF) corrosion inhibitor and adhesion promoter that uses a sol-gel-based formula. It is designed to protect a variety of coatings, including waterborne and solventborne clear coats, glossy direct-to-metal coatings, thin-film coatings, acrylic emulsions, polyurethanes, epoxies, alkyds, water-reducible alkyds, PVB wash primers, and polyester resins. This product is suitable for use in low-pH and acid-catalyzed systems.

HALOX® 570 LS is a ready-to-use liquid version of our popular organic corrosion inhibitor, HALOX® 570, which requires no dilution. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is especially effective along weld seams to prevent galvanic corrosion. HALOX® 570 LS may be used in formulations based on water-based acrylics, epoxy esters, 2-component epoxy, water-reducible alkyds, and water-based polyurethanes. HALOX® 570 LS may be used in both water-based primers and direct-to-metal topcoats. In direct-to-metal coatings, HALOX® 570 LS has a minimal effect on gloss reduction.

HALOX® 350 is a highly active organic corrosion inhibitor with 97–100% solids, specifically designed to prevent flash rust and in-can corrosion while also providing temporary corrosion protection. This product is an effective alternative to toxic nitrite-based flash rust inhibitors. It is in the form of a slightly yellow powder.

HALOX® 430 JM is a non-toxic, heavy metal-free anti-corrosive pigment designed for use in waterborne and solventborne protective coating systems. HALOX® 430 JM is based on a unique synergy between an ion scavenging and passivation mechanism. It is recommended for use in long-term applications where the use of heavy metals, such as zinc, strontium, barium, molybdenum, and chromate, is of concern.

HALOX® SZP-395 is a white, non-refractive, corrosion-inhibiting pigment used in protective coating systems. HALOX® SZP-395 is the most efficient and versatile corrosion-inhibiting pigment. It is recommended for use in a wide variety of resin systems and is equally effective in such resins as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of HALOX® SZP-395 make it the pigment of choice in thin film applications (<1 mil or 25 microns).

TARGON® P3 is an efficient VOC-free defoamer tailored for industrial additives. This white powder, easily mixable with powdery components, is designed for both gypsum and cement formulations. TARGON® P3 ensures smooth application by eliminating foam in constructions. This silicone, mineral oil, and VOC-free solution guarantees optimal performance.

HALOX® 700 is a white, non-refractive, corrosion-inhibiting pigment used in protective coatings. It provides extended protection in solvent-based and water-based epoxy and urethane coatings through the combination of zinc and aluminum phosphates. When used in alkyd and acrylic coatings, it is recommended to use it in combination with HALOX® Organic Corrosion Inhibitors for optimal performance.

HALOX® XTAIN® L-47 is a liquid stain-inhibiting additive that is zinc-free, ammonia-free, and free of volatile organic compounds (VOCs). Specifically formulated to prevent tannin bleed, it is highly effective in waterborne coating systems such as acrylic emulsions and polyurethane dispersions (PUD) used on various wood species, including redwood, merbau, and oak. This advanced additive delivers exceptional performance while meeting European ecolabel requirements, as it does not rely on Zn2+ cations. HALOX® XTAIN® L-47 offers similar efficiency to its predecessor, HALOX® XTAIN® L-44.

LOPON® P is a colorless to yellow, clear liquid dispersing agent designed for use in coatings and pigment slurries. It possesses excellent water softening properties, lime binding efficiency, and pigment wetting characteristics for inorganic pigments. LOPON® P also provides excellent color stabilization for shaded paint systems, ensuring consistency in the final product's appearance.

TARGON® G3 functions as a secondary retarder, operating in conjunction with citric or tartaric acid based on the formulation's pH. For formulations exhibiting an alkaline pH, G3 collaborates with tartaric acid. In formulations with a neutral pH, G3 partners with citric acid. TARGON® G3 contributes to the attainment of consistent setting, an extended working duration, and enhanced qualities during the finishing treatment phase.