Products

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 4250 is a hybrid bisphenol A/bisphenol F-type epoxy resin that is more flexible than conventional polymer-type epoxy resins. It can be used as an additive to add toughness, insulating and vapor barrier properties and resistance to heat, water and chemicals to a variety of applications. FeaturesPolymer-type epoxy resin with epoxy functional groups at the both endsHigh molecular weightHigh softening points Good adhesionApplicationsPCM, CAN and other coatingsPaintThermoplastics Printed electronics Plastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7110 is a tough and flexible liquid-type epoxy resin. It can be used as an impact modifier for brittle materials, as an additive to increase impact resistance, and for stress relaxation to avoid cracking and warpage. jER™ YX7110 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol. Features Adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol Crack and impact resistance Excellent flexibility and elasticity High viscosity Low warpage Maintains flexibility even after full-curing Applications Coatings Adhesives Composites Potting and encapsulation materials Base film/sheet for wearable devices *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2001 is a silicone-acrylic rubber-type impact modifier with high impact strength in all temperatures and excellent weatherability. It can be used with ABS, PC, PLA, and other matrix resins in a variety of automotive, aerospace and electric and electronic applications. Features Can be used with recycled plastics Good weather stability Low temperature impact resistance *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 1256 is a solid epoxy resin produced from Bisphenol A epoxy resin. It is a polymer-type epoxy resin with epoxy functional group at the both ends. It can be used to add toughness, insulating and vapor barrier properties, and resistance to heat, water and chemicals in a variety of applications. FeaturesHigh molecular weightHigh softening pointsGood film formerHydrolysis resistanceFlexibilityStrong adhesionApplicationsPCM, CAN, and other coatingsPaintsFiber-reinforced materialsThermoplasticsPrinted electronicsPlastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7400N is an adduct formed from the reaction of epichlorohydrin and an aliphatic polyol.FeaturesAdduct formed from the reaction of epichlorohydrin and an aliphatic polyolExcellent elasticityImpact resistanceApplicationsConsumer appliances and electronicsElectrical devices, assemblies, parts and componentsElectronics adhesivesElectrical and electronic packaging and assemblySpecialty and conformal coatingsPotting compoundsPrinted circuit boards (PCBs)Semiconductor manufacturing*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2200 is a silicone-acrylic-based rubber impact modifier with an epoxy-modified shell.Compatible with Polyethylene terephthalate (PET), polybutylene terephthalate (PBT), polyamide (PA) and alloy, it provides hydrolysis resistance, heat-aging resistance and impact strength for a wide range of automotive, aerospace and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

METABLEN™ A 3000 is an acrylic-modified polytetrafluoroethylene (PTFE) used in vacuum molding, foam molding, blow molding and profiling. It improves the melt tension that is required in these processing methods by minimizing increases in melt viscosity, without sacrificing the inherent properties of thermoplastics.BenefitsIncreases melt tension of a resinMaintains fluidityEnhances die swellImproves the flexural modulus, heat deformation temperature, and other properties of polypropyleneAnti-drip effect with flame-retardant resinsImproves filler dispersibilityBetter surface appearanceIncreases foam expansion ratioApplicationsAutomotiveConsumer goodsElectric and electronics*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2030 is a silicone-acrylic-based rubber impact modifier with excellent weatherability and super high impact strength at room temperature and low temperatures. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesGood impact strengthWeather stabilityHeat aging resistanceHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2100 is a silicone-acrylic-based rubber impact modifier with good colorability and impact strength. It is used for polycarbonates (PC) and polycarbonate blends, polyvinyl chloride, engineering plastics and polyolefins in a variety of automotive, aerospace, consumer goods, and electric and electronic applications. METABLEN™ S-2100 provides ductility on facial impact tests, even after immersion of coating chemicals. The effect is maintained at higher molding temperatures. BenefitsEasy to processFlame retardancy for engineering plastics and polyolefins elastomersFeaturesGood colorabilityWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ SX-006 is a silicone-acrylic rubber-type impact modifier that provides impact strength and weatherability while maintaining melt-flow ability and scratch resistance of PMMA and SAN. It also gives vivid molded-in colors like piano black. The compounded resins can be widely used in automotive exterior applications (e.g. front grill, pillar, door mirror housing). Features High impact strength in all temperature zones High modulus and excellent heat aging resistance Excellent colorability *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ A-3750 is an acrylic-modified polytetrafluoroethylene (PTFE) used as an anti-dripping agent in flame retardant formulations. It can be used for PC and alloy in automotive, aerospace, consumer goods, and electric and electronic applications.BenefitsResins with METABLEN™ A-3750 and flame retardants achieve V-0 in UL-94 testingImproves melt tensionIncreases die swell to improve surface appearanceImproves filler dispersibilityIncreases foam expansion ratioFeaturesAnti-drippingEasy to handleHigher dispersibility than standard PTFE powders*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S X-005 is a silicone-acrylic rubber-type impact modifier that provides flame retardance, hydrolysis resistance and impact strength. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesFlame retardantWeather stabilityHydrolysis resistanceImpact resistance even at low temperaturesLow friction*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ W 600A is an acrylic rubber-type impact modifier with good weatherability and hydrolysis resistance. It is used for polylactic acid (PLA), polycarbonate/polybutylene terephthalate (PC/PBT) and polycarbonate/polyethylene terephthalate (PC/PBT) in 3D printer filaments and aerospace, consumer goods, and electric and electronic applications.FeaturesHigh level of hydrolysis resistance Good impact strengthMaintains weather stability*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ A 3800 is acrylic-modified polytetrafluoroethylene (PTFE) that can be used as an anti-dripping agent for flame retardant formulations. It can be used for PC and alloy in automotive, aerospace, consumer goods, and electric and electronics applications.BenefitsResins with METABLEN™ A-3800 and flame retardant achieve V-0 in UL-94 testingImproves melt tensionIncreases die swellEnhances surface appearanceIncreases foam expansion ratio FeaturesAnti-dripping capabilityEasy to handle and processFlame retardantGood mechanical propertiesDisperses better than standard PTFE powders *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2260 is a silicone-acrylic-based rubber core shell-type impact modifier that provides super high impact strength and weatherability to acrylonitrile butadiene styrene (ABS), acrylonitrile styrene acrylate (ASA) and poly methyl methacrylate (PMMA) through extrusion and moldings. It is used for esthetic exterior car components such as front grills, and housings for electronics.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ C 223A is a butadiene-based rubber and graft copolymer. It is used as an impact modifier for ABS, polyamides, PC, PLA, and other matrix resins in automotive and transportation, electrical and electronics, and consumer goods applications.FeaturesImpact resistanceSuper high impact strength in all temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ SRK-200A is a silicone-acrylic-based rubber impact modifier with heat-aging resistance and impact strength. It is used for polycarbonate/acrylonitrile butadiene styrene (PC/ABS) and polycarbonate/polybutylene terephthalate (PC/PBT) in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesChemical resistanceWeather stabilityHeat resistanceHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2130 is a silicone-acrylic-based rubber impact modifier optimized for flame retardant polycarbonate (PC) resins. It adds colorability, heat-aging resistance and impact strength to PC and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ F 410 is an acrylic gloss control agent that provides a matte finish for injection molded plastics and elastomers. It can also be used as a blocking inhibitor for film and sheet extrusion.FeaturesGood dispersibilityPrevents blocking of sheet and film *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ W 450A is an acrylic rubber-type impact modifier with good weatherability and impact strength. It is used for polyvinyl chloride (PVC) in window frames, pipes and gutters.FeaturesHigh level of elasticity Good impact strengthMaintains weather stability*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

DIACRON™ ER-502 is a polyester resin with excellent solvent solubility. It is a high acid value and high molecular weight (Mw)-grade and is optimal as a binder for paints and inks due to its excellent pigment dispersibility. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Low temperature fusion Excellent metal adhesion Excellent pigment dispersion Can be used with cross-linking agents   Benefits: Solvent solubility High solid differentiation Use of biomass raw materials   Applications: PCM coatings For various types of inks Solventless & High Solids Coating   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

DIACRON™ FC-3399 is a polyester resin under development can be used for powder coating. It works well to keep color for a long time and has excellent mechanical strength by using curing agents such as TGIC and Primid (HAA) and Epoxy resins.   Features: Excellent chemical and weather resistance Excellent pigment dispersion Good mechanical strength Can be used with cross-linking agents   Benefits: Good heat resistance Durability High solid differentiation   Applications: Powder Coating For various types of inks Solventborne adhesive   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Ertalyte® TX Polyethylene Terephthalate Polyester PET is an unreinforced, semi-crystalline grade that offers superior dimensional stability, excellent wear resistance, a low coefficient of friction, high strength and rigidity, outstanding stain resistance, and great chemical and abrasion resistance. This grade is designed to withstand high pressure and velocity conditions and environments with soft metal and plastic mating surfaces where noise abatement is critical.Features:Superior dimensional stabilityExcellent wear resistanceLow coefficient of frictionHigh strength and rigidityOutstanding stain resistanceGreat chemical and abrasion resistanceBenefits:Withstands high pressure and velocity conditionsLow moisture absorption rate ensures mechanical and electrical properties are unaffected by moistureLow wear rate compared to unmodified polyestersIdeal for use in environments with soft metal and plastic mating surfaces where noise abatement is criticalApplications:High pressure and velocity applicationsFood processing and packagingPharmaceuticalOil and gas industriesMechanical precision parts that must endure high loads and wear conditions.

SHIKOH™ UT-7792 is a bio-based urethane acrylate oligomer. (Development product) Its biomass degree is 71% while its mechanical properties are the same as a non-biomass grade UV-3300B, with higher elongation and very soft rubbery elasticity suitable for using UV-curable adhesives for electronics devices. Features Bio-based Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Semitron® ESd 500HR Polytetrafluoroethylene PTFE electro static dissipative shapes offer an excellent combination of low frictional properties, outstanding dimensional stability, and a high resistivity range of 10E9 to 10E11 ohms per square. Reinforced with a proprietary synthetic mica, Semitron® ESd 500HR PTFE is thermally stable up to temperatures of 500° F / 260° C without degradation, and possesses high thermal insulation and a low coefficient of friction. Due to these characteristics, this grade is ideal for applications where controlled bleed off of static charges is critical.Features:Reinforced with a proprietary synthetic mica for improved performanceLow frictional properties and outstanding dimensional stabilityHigh resistivity range of 10E9 to 10E11 ohms per squareThermally stable up to temperatures of 500° F / 260° C without degradationHigh thermal insulation and low coefficient of frictionBenefits:Ideal for applications where controlled bleed off of static charges is criticalCan withstand high temperatures without degradationLow coefficient of friction and high thermal insulation provide improved performance in various applicationsApplications:Inserts for sensitive devices to reduce damage from static dischargeOther applications where controlled bleed off of static charges is critical and PTFE is typically used.Suitable for use in various industries including semiconductor and electronics, aerospace, and industrial machinery.

DIACRON™ FC-3278 is a high Tg grade polyester resin with excellent environmental friendliness using 50wt% or more of recycled material. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Excellent chemical and weather resistance Excellent pigment dispersion. Heat-resistant Contains 50% recycled material   Benefits: Good heat resistance Durability   Applications: Powder Coating  PCM coatings      For various types of inks    *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2501 is a is silicone-acrylic-rubber-type impact modifier that adds hydrolysis resistance, heat-aging resistance and impact strength to polycarbonate (PC), polylactic acid (PLA) and alloy in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesGood impact strengthWeather stabilityHeat aging resistance*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UV-3300B is UV curable urethane acrylate oligomer with excellent soft-elasticity, and very high elongation. It also shows good mechanical properties even at low temperature. EB and Thermal cure systems are also applicable. Features Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Good mechanical properties at low temperature Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

DIACRON™ FC-3288 is a polyester resin with excellent pigment dispersibility. It is a low Tg grade and is optimal as a binder for paints and adhesives. By blending with a high Tg grade DIACRON, it exhibits excellent adhesion and bendability to plastic films, moldings and metals such as aluminum, copper and iron. It improves hardness, heat resistance and toughness by using additive such as isocyanates.   Features: Low Tg and excellent substrate adhesion Excellent chemical and weather resistance Excellent pigment dispersion   Benefits: Use of biomass raw materials Flexibility  Durability   Applications: PCM coatings Adhesives for films Binder for screen inks Heat seal   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.