Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Processing Information (Injection Molding)
- Rheological Properties
| Value | Units | Test Method / Conditions | |
| Tensile Modulus | 2100.0 | MPa | ISO 527 |
| Tensile Stress at Yield | 50.0 | MPa | ISO 527 |
| Tensile Elongation at Yield | 5.3 | % | ISO 527 |
| Tensile Elongation at Break | 70.0 | % | ISO 527 |
| Impact Strength (Charpy, at 23°C) | no break | kJ/m² | ISO 179/1eU |
| Impact Strength (Charpy, at -40°C) | no break | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Charpy, at 23°C) | 27.0 | kJ/m² | ISO 179/1eA |
| Notched Impact (Charpy, at -40°C) | 16.0 | kJ/m² | ISO 179/1eA |
| Value | Units | Test Method / Conditions | |
| Density | 1310.0 | kg/m³ | ISO 1183 |
| Value | Units | Test Method / Conditions | |
| Vicat B50 | 145.0 | °C | ISO 306 |
| HDT / A (1.8 MPa) | 133.0 | °C | ISO 75-1/-2 |
| Value | Units | Test Method / Conditions | |
| Melt Temperature | 270 - 310 | °C | - |
| Mould Temperature | 80 - 110 | °C | - |
| Value | Units | Test Method / Conditions | |
| Melt Index (MVR) | 8.0 | cm³/10min | ISO 1133 |
| MVR Temperature | 300.0 | °C | - |
| MVR Load | 1.2 | kg | - |
| Shrinkage (24h) | 0.5 - 0.8 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- 120 °C in a dry air (dessiccant) dryer for 2-3 h
- In an air circulatIng dryer 100-120 °C for 4-12 h
- Dependant on moisture content
Storage & Handling
- Storage Conditions
Store in dry, protected from light.