Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Processing Information (Injection Molding)
- Rheological Properties
Value | Units | Test Method / Conditions | |
Flexural Modulus | 2400.0 | MPa | ISO 178 |
Flexural Strength | 80.0 | MPa | ISO 178 |
Tensile Modulus | 2550.0 | MPa | ISO 527 |
Tensile Stress at Yield | 55.0 | MPa | ISO 527 |
Tensile Elongation at Yield | 10.0 | % | ISO 527 |
Impact Strength (Charpy, at 23°C) | 80.0 | kJ/m² | ISO 179/1eU |
Notched Impact Strength (Charpy, at 23°C) | 5.0 | kJ/m² | ISO 179/1eA |
Value | Units | Test Method / Conditions | |
Density | 1440.0 | kg/m³ | ISO 1183 |
Value | Units | Test Method / Conditions | |
Vicat B50 | 145.0 | °C | ISO 306 |
HDT / A (1.8 MPa) | 90.0 | °C | ISO 75-1/-2 |
Value | Units | Test Method / Conditions | |
Melt Temperature | 180 - 220 | °C | — |
Mould Temperature | 60 - 120 | °C | — |
Value | Units | Test Method / Conditions | |
Melt Index (MVR) | 6.5 | cm³/10min | ISO 1133 |
MVR Temperature | 190.0 | °C | — |
MVR Load | 2.16 | kg | — |
Shrinkage (Lengthwise, 24h) | 1.8 - 2.2 | % | ISO 294-4 |
Shrinkage (Lateral, 24h) | 1.6 - 2 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- In a dry air (dessiccant) dryer 100-110 °C for 2-3 h
- In an air circulatIng dryer 100-110 °C for 3-5 h Dependant on moisture content
Storage & Handling
- Storage Conditions
Store in dry, protected from light not above 30°C.