Products

MOCOM Compounds ALCOM® POM 770/1 SLBV is a polyoxymethylene copolymer with a special filler and improved sliding/wear and heat stabilized properties. It is typically used in functional components, bearings, and sliding elements in the automotive and machinery industry and can be processed using injection molding with a melt temperature of 180-220°C and a mold temperature of 60-90°C. Pre-drying should be done using either a dry air (dessiccant) dryer or an air circulating dryer at 100-110°C for 2-3 hours or 3-5 hours respectively, depending on the moisture content.

MOCOM Compounds ALCOM® POM 770/1.1 CF20 is a Polyoxymethylene Copolymer with 20% carbon fibers that offers electrically conductivity, reduced surface resistivity and high stiffness. It is commonly used for functional components and bearings in automotive, machinery, and other industries. For pre-drying, the material should be placed in a dry air (dessiccant) dryer at 100-110°C for 2-3 hours, or in an air circulating dryer at 100-110°C for 3-5 hours, with a maximum moisture content of less than 0.02%. The melt temperature for injection molding is 190-230°C and the mold temperature is 60-120°C.

MOCOM Compounds ALCOM® POM 770/1 MO2 is a pre-dried Polyoxymethylene Copolymer containing 2% molybdenium disulphide, which has improved sliding/wear properties and is used in the automotive and machinery market segments. It should be processed by injection molding with a melt temperature of 180-220°C and mold temperature of 60-120°C. Prior to processing, it must be dried in a dry air (dessiccant) dryer or an air circulating dryer at 100-110°C for 2-3 hours or 3-5 hours, respectively, depending on the moisture content.

MOCOM Compounds ALCOM® POM 770/1 PTFE20 is a Polyoxymethylene Copolymer filled with 20% PTFE, which improves sliding and wear properties. It is used for automotive and machinery applications, such as gear wheels, roller bearings, functional components, bearings and sliding elements. The recommended melt temperature for injection molding is 180-220°C and the mold temperature should be 60-120°C. Additionally, the product should be stored in a dry place, protected from light, at a temperature not exceeding 30°C.

MOCOM Compounds ALCOM® WP POM 5020 TF 18029 is a Polyoxymethylene Copolymer containing 20% PTFE/Aramid, with improved sliding/wear features. It is suitable for functional components, bearings, and sliding elements in the Automotive and Machinery markets. For processing injection molding, a melt temperature of 190-230°C and a mold temperature of 60-120°C should be used.

MOCOM Compounds ALCOM® POM 770/1 SI2 is a heat-stabilized, improved sliding/wear Polyoxymethylene Copolymer with a 2% silicone filler/additive system. It is typically used for bearings and sliding elements, functional components, gear wheels, and roller bearings in the automotive and machinery market segments. For processing injection molding, the melt temperature should be between 180-220°C and the mold temperature should be between 60-120°C. It should be pre-dried in a dry air (desiccant) dryer at 100-110°C for 2-3 hours or an air circulating dryer at 100-110°C for 3-5 hours depending on moisture content.

MOCOM Compounds ALCOM® LB POM 1000 18008 WT1005-18 is a Polyoxymethylene Copolymer with a special filler/additive system that makes it highly reflective and opaque. It is used in Automotive and Lighting market segments for applications such as light guides, reflectors, and light-blocking components. When processed with injection molding, it requires a melt temperature of 190-230°C and a mold temperature of 60-120°C.

MOCOM Compounds ALCOM® POM 770/1 GF20 PTFE15 is a Polyoxymethylene Copolymer containing 20% glass fibers and 15% PTFE. It has improved sliding/wear and heat-stabilized properties, making it suitable for automotive and machinery applications such as gear wheels, roller bearings, and functional components, bearings, and sliding elements. Processing for injection molding is at a melt temperature of 190-230°C and a mold temperature of 60-120°C.

MOCOM Compounds ALCOM® POM 770/1 SLAP is a polyoxymethylene copolymer pre-dried in either a dry air (dessiccant) or air circulating dryer at 100-110°C for 2-3 h or 3-5 h respectively, depending on the moisture content. It contains a special filler for improved sliding/wear and heat stabilization. This material is primarily used in the automotive and machinery industries for injection molded parts such as bearings and sliding elements, and functional components. The melt temperature for injection molding is 180-220°C and the mold temperature should be set between 60-90°C.

MOCOM Compounds ALCOM® POM 770/1 PTFE10 is a heat-stabilized, easy-release (demolding) and improved sliding/wear base polymer composed of Polyoxymethylene/general with 10% PTFE filler/additive system. It is suitable for various market segments and application areas and is processed via injection molding with a melt temperature of 180-220°C and mold temperature of 60-120°C. To ensure longevity, it should be stored in a dry, light-protected environment not exceeding 30°C.

MOCOM Compounds ALCOM® POM 770/1 PTFE1,5 is a polyoxymethylene copolymer with 1.5% PTFE added as a filler/additive system, designed to improve sliding/wear. It is used in the automotive and machinery market segments for functional components, gear wheels, roller bearings, and sliding elements. For processing injection molding, the recommended melt temperature is 180-220°C and the mold temperature is 60-100°C. The product should be stored in a dry, light-protected environment at a temperature not exceeding 30°C.

MOCOM Compounds ALCOM® POM 770/1 PTFE15 is a Polyoxymethylene Copolymer containing 15% PTFE, which gives improved sliding and wear properties. It is mainly used in the automotive and machinery markets for functional components, bearings and sliding elements. The processing injection molding melt temperature is 180-220°C and the mold temperature is 60-100°C.

MOCOM Compounds ALCOM® POM 770/1.1 CF10 is a Polyoxymethylene Copolymer base polymer with 10% carbon fibers as the filler/additive system. It has the special features of being electrically conductive and having reduced surface resistivity, making it a popular choice for injection molded parts such as functional components and bearings in the automotive and machinery market segments.

MOCOM Compounds ALCOM® POM 770/1 PTFE18 SI2 is a polyoxymethylene copolymer with a 20% PTFE/Silicone filler/additive system designed for improved sliding and wear in the automotive and machinery market segments. Typical applications include functional components, bearings, and sliding elements. It can be processed by injection molding with a melt temperature of 180-220°C and a mold temperature of 60-100°C. Pre-drying conditions include either a dry air (desiccant) dryer for 2-3 hours at 100-110°C, or an air circulating dryer for 3-5 hours at 100-110°C, depending on the moisture content.