Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
company tower banner
MOCOM Compounds Company Logo

ALTECH® PP-H A 2030/100 GF30

1 of 305 products in this brand
MOCOM Compounds ALTECH® PP-H A 2030/100 GF30 is a Polypropylene Homopolymer with 30% glass fibers filler/additive system for various injection molded parts, featuring high stiffness, heat stabilization, slip agent and easy release (demolding). During processing, injection molding should be done using a melt temperature of 200-250°C and a mold temperature of 20-70°C. After processing, the parts should be stored in a dry, light-protected location at a temperature not exceeding 30°C to ensure their quality.

Polymer Name: Polypropylene Homopolymer (HPP)

Processing Methods: Injection Molding

Additives Included: Heat Stabilizer, Slip Agent

Fillers Included: Glass Fiber

Technical Data Sheet

Popular MOCOM Compounds Products

View All MOCOM Compounds Products

Knowde Enhanced TDS

Identification & Functionality

Additives Included

Heat Stabilizer,

Slip Agent

Chemical Family

Polyolefins,

Polypropylenes (PP)

Fillers Included

Glass Fiber

Polymer Name

Polypropylene Homopolymer (HPP)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Basic Thermoplastics

Polyolefins

Features & Benefits

Labeling Claims

Azo Colorants-free,

Azo Dyes-free,

Conflict minerals-free,

PAH-free,

PFOA-free,

PFOS-free,

Persistent Organic Pollutants (POP)-free

Materials Features

Good Mold Release,

Heat Stabilized,

High Stiffness,

Radar Transparent

Applications & Uses

Markets

Electrical & Electronics

Applications

Electrical & Electronics — Parts & Components

Sensors & Actuators

Plastics & Elastomers End Uses

Radomes

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Mechanical Properties
ValueUnitsTest Method / Conditions
Flexural Modulus5400.0MPaISO 178
Flexural Strength90.0MPaISO 178
Tensile Modulus6000.0MPaISO 527
Tensile Strength at Break65.0MPaISO 527
Tensile Elongation at Break1.7%ISO 527
Impact Strength (Charpy, at 23°C)20.0kJ/m²ISO 179/1eU
Notched Impact Strength (Charpy, at 23°C)5.0kJ/m²ISO 179/1eA
Notched Impact (Charpy, at -40°C)4.0kJ/m²ISO 179/1eA
Physical Properties
ValueUnitsTest Method / Conditions
Density1120.0kg/m³ISO 1183
Typical Properties
ValueUnitsTest Method / Conditions
Dielectric Constant (εr)2.678——
Dielectric Constant (εr)2.678——
Dissipation Factor (tan δ) (at 77GHz, 2 mm)0.013——
Dissipation Factor (tan δ) (at 77GHz, 2 mm)0.013——
Thermal Properties
ValueUnitsTest Method / Conditions
Vicat B50121.0°CISO 306
HDT / A (1.8 MPa)138.0°CISO 75-1/-2
DSC (Melt Point)166.0°CISO 11357
Processing Information (Injection Molding)
ValueUnitsTest Method / Conditions
Mould Temperature20 - 70°C—
Melt Temperature200 - 250°C—
Rheological Properties
ValueUnitsTest Method / Conditions
Melt Index (MVR)3.0cm³/10minISO 1133
MVR Temperature230.0°C—
MVR Load2.16kg—
Shrinkage (Lengthwise, 24h)0.2 - 0.4%ISO 294-4
Shrinkage (Lateral, 24h)0.3 - 0.5%ISO 294-4

Regulatory & Compliance

Certifications & Compliance

Directive 2011/65/EC amended through EU/2015/863 (RoHS),

EC No.1907/2006,

IATF 16949,

ISO 13485,

ISO 14001,

ISO 17025,

ISO 45001,

ISO 50001,

ISO 9001,

REACH (Europe),

REACH (UK),

RoHS Compliant,

SVHC Compliant

Technical Details & Test Data

Pre-Drying Conditions
  • In a dry air (dessiccant) dryer 80-120 °C for 2-3 h
  • In an air circulatIng dryer 80-120 °C for 2-4 h
  • Dependant on moisture content

Storage & Handling

Storage Conditions

Store in dry, protected from light not above 30°C.