Products

MOCOM Compounds ALCOM® ASA/PC 540/5 UV GY81-714MCF is a UV stabilized polycarbonate + Acrylonitrile Styrene Acrylate Blend with a metallic color and low tendency to flow lines. It is typically used for housings and is suitable for electrical and electronic, building and construction, and sport and leisure market segments. Pre-drying Conditions for this material are in a dry air (dessiccant) dryer 90-110°C for 2-4 hours, in an air circulating dryer 90-110°C for 4-8 hours depending on moisture content. Processing Injection molding involves using a melt temperature of 260-300°C and a mold temperature of 60-90°C. It is important to note that the material should be dried prior to molding to ensure optimal performance.

MOCOM Compounds ALCOM® AWL 109/15 UV WT1217-11LB is a base polymer of acrylonitrile/butadiene/styrene/copolymer modified with polycarbonate, containing 15% special filler and special features of being highly reflective, opaque, UV stabilized, and highly heat stabilized. It is intended for use in the automotive and various market segments, primarily for lighting and light blocking components such as light guides and reflectors.

MOCOM Compounds ALCOM® AWL 109/10 WT1218-11LB is a base polymer - acrylonitrile/butadiene/styrene/copolymer modified with polycarbonate, containing a filler/additive system of 10% special filler and special features of being highly reflective, opaque, and highly heat-stabilized. It is suitable for use in the automotive and various market segments, primarily for use in lighting and light-blocking components such as light guides and reflectors.

MOCOM Compounds ALCOM® AWL 109/10 GF20 WT1142-12LB is a base polymer of Acrylonitrile/Butadiene/Styrene/Copolymer, modified with polycarbonate and a Filler/Additive System of special filler, 20 % glass fibers. It features high reflectivity, opacity, heat stability, and stiffness, making it suitable for use in the Automotive and Lighting Market Segments for applications such as lighting, light blocking components, and light guides and reflectors. Processing Injection molding is done with a melt temperature of 240-270°C and a mold temperature of 60-100°C.

MOCOM Compounds ALCOM® PBT/ASA 715/1 GF15 TF6 UV WT1287-09LB is a material composed of a base polymer of Polybutylene Terephthalate + Acrylonitrile Styrene Acrylate, a filler/additive system of 15% glass fibers and 6% PTFE, and special features of high reflectivity, opacity, and high stiffness, with UV stabilization. It is developed for the automotive and lighting industries and is suitable for light guides, reflectors, and light blocking components.

MOCOM Compounds ALCOM® MS PC+ABS 1000 17113 is a premium-grade engineering polymer specifically designed for injection molding applications in the automotive industry. This product is a blend of Polycarbonate and Acrylonitrile Butadiene Styrene (PC+ABS) and is modified with antisqueak additives to provide a comfortable and quiet driving experience.

MOCOM Compounds ALTECH® PBT+ABS A 2020/620 GF 20 UV is a highly UV and heat stabilized base polymer composed of Polybutylene Terephthalate and Acrylonitrile Butadiene Styrene with 20% glass fibers, suitable for various injection molded parts. Pre-drying conditions should be done in a dry air (dessiccant) dryer at a temperature of 90-115°C for 2-4 h depending on moisture content, with a maximum moisture content of less than 0.04%. For processing injection molding, the melt temperature should be between 250-280°C and mold temperature between 60-90°C.

MOCOM Compounds ALTECH® ABS+PMMA A 1000/500 is a processing-stabilized, scratch-resistant polymer used for injection molded parts in various market segments, such as clothing/fasteners and bezels. It has a service temperature range of -40-85°C and a maximum shelf life of 24 months. Pre-drying conditions should be implemented before processing at a melt temperature of 220-260°C and a mold temperature of 50-80°C. The base polymer is polymethylmethacrylate and acrylonitrile/butadiene/styrene/copolymer. It should be stored dry and protected from light at temperatures not exceeding 30°C.

MOCOM Compounds ALCOM® HM PA+ABS 1000 AG 16077 is a hygienic material with antibacterial features according to ISO 22196. It is white in color, similar to RAL 9003, and is mainly used for injection molded parts such as sanitary articles, hygiene products, functional components, fittings, housings, clothing/fasteners. It is also suitable for applications such as packaging, personal care, furniture, building and construction, and sport and leisure.

MOCOM Compounds ALCOM® AWL 109/15 WT1217-11LB is a highly reflective, opaque, and high heat stabilized Acrylonitrile/Butadiene/Styrene/Copolymer modified with polycarbonate and 15% special filler. It is used in automotive, various lighting, and light blocking components and its typical applications are light guides and reflectors. It is approved by GMW15702 and should be processed with a melt temperature of 230-270°C and a mold temperature of 60-100°C.

MOCOM Compounds ALCOM® LB ECO PC+ABS 1000 SL WT1023-21 is a pre-dried injection molding grade with a polycarbonate + acrylonitrile butadiene styrene blend. It is highly reflective, contains recycled material, has anti-squeak modifications, and is opaque. It is used in the automotive, electrical and electronic, and lighting markets and is typically used for light guides and reflectors. When processing injection molding, the melt temperature should be 240-280°C and the mold temperature should be 70-100°C.

MOCOM Compounds ALCOM® ABS+SAN A 1000/100 SV2067-06MCF has pre-drying conditions of 80°C in a dry air (dessiccant) dryer for 2-4 hours and 80°C in an air circulating dryer for 3-6 hours. Its base polymer is Acrylonitrile/butadiene/styrene + Styrene/acrylonitrile, and it has a metallic effect color. It has low tendency to flow lines and is used in the market segments of electrical and electronic, building and construction, and various. Its application area is for housings, fixing elements, and various, and it is processed by injection molding with a melt temperature of 220-260°C and mold temperature of 50-80°C. It should be stored in a dry and light-protected environment not exceeding 30°C.

MOCOM Compounds ALCOM® LB PC+ABS 1000 19037 RD1036-19 is an injection molding grade polymer blend of polycarbonate and Acrylonitrile Butadiene Styrene that is highly reflective and opaque. It is used in automotive, electrical and electronic, and lighting market segments for applications such as light guides and reflectors. During processing injection molding, a melt temperature of 250-280°C and mold temperature of 70-100°C should be maintained. After processing, the material should be stored in a dark environment to protect it from light.

MOCOM Compounds ALCOM® PC+AWL 750/15.1 WT1378-04LB is a polycarbonate + acrylonitrile butadiene styrene blend with a special filler that is highly reflective and opaque. It is used in automotive, electrical and electronic, and lighting market segments for lighting and light blocking components such as light guides and reflectors. The pre-drying conditions should include a dry air (dessiccant) dryer at 100-110°C for 2-4 hours, and an air circulating dryer at 100-110°C for 4-8 hours, with a maximum moisture content of <0.02%.

MOCOM Compounds ALCOM® CFX ABS+PC 1000 UV 19004 is a modified Acrylonitrile/Butadiene/Styrene/Copolymer with polycarbonate and UV stabilized filler/additive system designed to give a special metallic effect and good flow. It is suitable for injection molding applications in the automotive, building and construction industries, and is used for housing and clothing/fastener applications.

MOCOM Compounds ALTECH® ECO PC+ABS 1000/568 is a polycarbonate + acrylonitrile butadiene styrene blend that has been impact modified and contains recycled material. It is suitable for applications in the automotive, electrical and electronic, and various markets and can be used for interior and domestic appliances, housings, and functional components.

MOCOM Compounds ALCOM® WP PC+ABS 5005 TFUV 16151 is a polycarbonate + Acrylonitrile Butadiene Styrene blend with 5% PTFE and UV stabilization that has improved sliding and wear properties. It is used in automotive, machinery, and injection molded parts, such as housings, functional components, bearings, and sliding elements. Processing injection molding requires a melt temperature of 240-280°C and a mold temperature of 70-100°C.

MOCOM Compounds ALTECH® PBT+ASA A 4212/507 MR/GF12 is a polybutylene terephthalate + acrylonitrile styrene acrylate with 12% glass fiber/mineral filler/additive system. It is pre-dried in a dry air (dessiccant) dryer at 90-115°C for 2-4 hours, depending on moisture content, with a maximum moisture content of <0.04%. During injection molding, the melt temperature should be set between 250-280°C and the mold temperature between 60-100°C. This material has low warpage, easy flow, impact modified, and heat stabilized properties, making it suitable for interior decoration/finishing, clothing/fasteners, and various other applications.

MOCOM Compounds ALTECH® ECO PC+ABS 1000/510 IM is a polycarbonate + Acrylonitrile Butadiene Styrene blend containing recycled material, designed for automotive, electrical and electronic, and various applications. The pre-drying conditions involve a dry air (dessiccant) dryer at 100-110°C for 2-4 hours, or an air circulating dryer at 100-110°C for 3-6 hours, depending on moisture content. Processing Injection molding requires a melt temperature of 240-280°C and a mold temperature of 70-100°C. Typical applications include housings, functional components, and various other products. The product should be kept in a light-protected environment.

MOCOM Compounds ALTECH® PBT+ASA A 2020/510 GF20 is an impact-modified, low-warpage, easy-flow polybutylene terephthalate + acrylonitrile styrene acrylate with a glass fiber filler/additive system. Pre-drying conditions require a dry air (desiccant) dryer at 80-120°C for 2-4 hrs depending on moisture content, with a maximum moisture content of <0.04%. Processing temperature for injection molding is 250-270°C and 60-100°C for the mold temperature. Typical applications include interior decoration/finishing, clothing/fasteners, and various other applications. It is ideal for applications requiring high mechanical strength, chemical resistance and heat stability.

MOCOM Compounds ALCOM® HM PC+ABS 1000 AG 16152 is a hygienic material with antibacterial properties according to ISO 22196 in its natural color. It is designed for packaging, personal care, household goods, furniture, building and construction, and sport and leisure applications. It is suitable for injection molded parts such as sanitary articles, hygiene products, functional components, fittings, housings, clothing/fasteners, handles, profiles, etc.

MOCOM Compounds ALCOM® HM PA+ABS 1000 AG 14069 is a hygienic material composed of a Polyamide + Acrylonitrile Butadiene Styrene Blend, available in gray, similar to RAL 7015 and RAL 7042. It has antibacterial properties according to ISO 22196 and can be used for packaging, personal care, furniture, building and construction, and sport and leisure applications.

MOCOM Compounds ALCOM® MS ECO PC+ABS R 1000 SL is an injection molding grade modified for antisqueak properties, containing recycled material and providing easy release for demolding. Mainly used in the automotive industry for interior decoration and finishing, such as housings, the melt temperature for injection molding is 240-250°C and the mold temperature should be 70-100°C.

MOCOM Compounds ALTECH® ECO PC+ASA 1000/506 is a polycarbonate + Acrylonitrile Styrene Acrylate Blend that has been processing stabilized and contains recycled material. It is suitable for electrical and electronic applications such as sockets, plugs/connectors, and various others. Pre-drying conditions should be followed as in an air circulating dryer at 100-110°C for 3-6 hours, or in a dry air (dessiccant) dryer at 100-110°C for 2-4 hours. For injection molding, the melt temperature should be 250-290°C, and the mold temperature should be 60-100°C. This product should be stored in a cool, dark place to protect it from light.

MOCOM Compounds ALCOM® WP PC+ABS 5008 TFUV 17009 is a polycarbonate + acrylonitrile butadiene styrene blend containing 8% PTFE, UV stabilized, with improved sliding/wear properties. It is used in the automotive and machinery markets for injection molded parts such as housings, functional components, bearings, and sliding elements. Pre-drying conditions should be in a dry air (desiccant) dryer at 100-110°C for 2-4 hours, or in an air circulating dryer at 100-110°C for 4-8 hours depending on moisture content. Processing for injection molding should have a melt temperature of 240-280°C and a mold temperature of 70-100°C. The material should be stored and protected from light.

MOCOM Compounds ALCOM® PC+AWL 750/20.1 WT1407-04LB is a Pre-Drying Conditions Polymer Blend composed of a Base Polymer of polycarbonate + Acrylonitrile Butadiene Styrene, and a Filler/Additive System of 20% special filler. It is highly reflective and opaque and is used in the Market Segment of Automotive, electrical and electronic, Lighting. Typical Applications include light guides, reflectors, lighting, and light blocking components. It is processed through Injection molding with a melt temperature of 250-280°C and a mold temperature of 70-100°C.

MOCOM Compounds ALTECH® PA6+ABS A 1000/720 UV is a polyamide + acrylonitrile butadiene styrene blend that is processing and UV stabilized. It is commonly used for injection molded parts such as housings in domestic appliances, cosmetics, and jewelry. Pre-drying conditions should be 80°C in a dry air (dessiccant) dryer for 2-12 h, depending on moisture content. Processing injection molding requires a melt temperature of 250-280°C and a mold temperature of 40-90°C. This product should be protected from light to maintain its quality and should be stored in a cool, dark place.

MOCOM Compounds ALCOM® PC+ABS 750/10 GF10 RD1016-05LB is a polycarbonate + Acrylonitrile Butadiene Styrene Blend containing 10% glass fibers and special filler. It has a red color, similar to RAL 3013, and is opaque. It is typically used in applications such as light blocking components, display elements, and operating elements.

MOCOM Compounds ALCOM® LB PC+ABS 1000 18079 RD1094-18 is a pre-drying conditions injection molding grade, highly reflective, opaque and suitable for automotive, various, and lighting, light blocking components, various markets. The recommended pre-drying conditions are in a dry air (dessiccant) dryer 100-110°C for 2-4 hours or in an air circulating dryer 100-110°C for 4-8 hours with a maximum moisture content of less than 0.02%. The recommended processing injection molding parameters are a melt temperature of 250-280°C and a mold temperature of 70-100°C.

MOCOM Compounds Altech® ECO PC+ABS 1000/500 is a polycarbonate + acrylonitrile butadiene styrene blend that contains recycled material and is suitable for injection molded parts, radiator systems, interior, ducting/piping systems, housings, housing and automotive trim unpainted, sockets, plugs/connectors, light switches, and various other applications.

MOCOM Compounds Altech® ECO PC+ABS 1000/106 is a polycarbonate and acrylonitrile butadiene styrene blend that is processing stabilized and contains recycled material. It is typically used for housings, fixing elements, and various other applications in the electrical and electronic, furniture, and other market segments.