Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Optical Properties
- Flammability
- Processing Information (Injection Molding)
- Rheological Properties
| Value | Units | Test Method / Conditions | |
| Flexural Modulus | 2700.0 | MPa | ISO 178 |
| Flexural Strength | 75.0 | MPa | ISO 178 |
| Tensile Modulus | 2700.0 | MPa | ISO 527 |
| Tensile Stress at Yield | 50.0 | MPa | ISO 527 |
| Tensile Elongation at Yield | 3.0 | % | ISO 527 |
| Tensile Elongation at Break | 13.0 | % | ISO 527 |
| Impact Strength (Charpy, at 23°C) | 85.0 | kJ/m² | ISO 179/1eU |
| Impact Strength (Charpy, at -40°C) | 83.0 | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Charpy, at 23°C) | 13.0 | kJ/m² | ISO 179/1eA |
| Notched Impact (Charpy, at -40°C) | 8.0 | kJ/m² | ISO 179/1eA |
| Ball Indentation Hardness (H358/30) | 115.0 | MPa | ISO 2039-1 |
| Ball Indentation Temperature | 100.0 | °C | DIN EN 60695-10-2 |
| Value | Units | Test Method / Conditions | |
| Density | 1240.0 | kg/m³ | ISO 1183 |
| Value | Units | Test Method / Conditions | |
| Vicat B50 | 110.0 | °C | ISO 306 |
| HDT / A (1.8 MPa) | 100.0 | °C | ISO 75-1/-2 |
| Value | Units | Test Method / Conditions | |
| Moisture Content | max. 0.02 | % | — |
| Value | Units | Test Method / Conditions | |
| Tristimulus Value Y10 of Reflection | 93.0 | % | DIN 5033 |
| Tristimulus Value Y10 of Transm.,d=0.5mm | 0.4 | % | ISO 13468 |
| Value | Units | Test Method / Conditions | |
| Flammability (1.5 mm) | HB | class | UL 94 |
| Flammability (3.0 mm) | HB | class | UL 94 |
| UL Recognition | yes | — | — |
| Yellow Card Available | yes | — | — |
| Glow Wire (GWFI, 650°C, 1mm) | Passed | — | DIN EN 60695 |
| Glow Wire (GWFI, 650°C, 2mm) | Passed | — | DIN EN 60695 |
| Glow Wire (GWFI, 650°C, 3mm) | Passed | — | DIN EN 60695 |
| Fire Behavior FMVSS (2.0 mm) | Passed | — | FMVSS 302/DIN 75200 |
| Value | Units | Test Method / Conditions | |
| Melt Temperature | 230 - 270 | °C | — |
| Mould Temperature | 60 - 100 | °C | — |
| Value | Units | Test Method / Conditions | |
| Melt Index (MVR) | 15.0 | cm³/10min | ISO 1133 |
| MVR Temperature | 220.0 | °C | — |
| MVR Load | 10.0 | kg | — |
| Shrinkage (24h) | 0.4 - 0.7 | % | ISO 294-4 |
Regulatory & Compliance
- Certifications & Compliance
- OEM Specifications
Technical Details & Test Data
- Pre-Drying Conditions
- In a dry air (dessiccant) dryer 80-90 °C for 2-4 h
- In an air circulatIng dryer 80-90 °C for 4-8 h
Storage & Handling
- Storage Conditions
Store in dry, protected from light.