Products

MOCOM Compounds ALCOM® LDDC PMMA 1000 UV 18124 BK1074-11 is a polymethylmethacrylate base polymer with a UV stabilized filler/additive system suitable for applications such as lamp covers, display elements, operating elements, and light transparent components in automotive and lighting markets. Pre-drying conditions include 80°C in a dry air (dessiccant) dryer for 3-4 hours and 80°C in an air circulating dryer for 4-6 hours, with a maximum moisture content of <0.02%. For injection molding, melt temperature should be between 220-280°C and mold temperature should be between 50-80°C.

MOCOM Compounds ALCOM® PC 740/4 UV RD1231-11LD3 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and translucent with light scattering and good flow. It is used in the automotive and lighting market segments for applications such as lamp covers, display elements, and operating elements. It has GS93016 approvals and must be protected from light. For processing injection molding, the melt temperature should be 270-310°C and the mold temperature should range from 80-110°C.

MOCOM Compounds ALCOM® PC 740/4 GY1189-09LD is a polycarbonate base polymer with a special filler/additive system that provides high light transmission, light scattering, and easy flow. It is approved by GS93016 and is typically used for lamp covers, display elements, and operating elements in the automotive and lighting market segments. The pre-drying conditions require 120°C in a dry air (dessiccant) dryer for 2-4 hours and 120°C in an air circulating dryer for 4-12 hours with a maximum moisture content of <0.02%. For processing injection molding, the melt temperature should be between 270-310°C and the mold temperature should be between 80-110°C. No extra sentences are required.

MOCOM Compounds ALCOM® ASA 540/7 UV SV1156-12MCF is a base polymer of Acrylonitile/Styrene/Acrylate/Copolymer with a metallic effect similar to RAL 9006, featuring low tendency to flow lines and UV stabilization. It is used for electrical and electronic, building and construction, and sport and leisure applications such as housings.

MOCOM Compounds ALCOM® POM 770/1 GF20 PTFE15 is a Polyoxymethylene Copolymer containing 20% glass fibers and 15% PTFE. It has improved sliding/wear and heat-stabilized properties, making it suitable for automotive and machinery applications such as gear wheels, roller bearings, and functional components, bearings, and sliding elements. Processing for injection molding is at a melt temperature of 190-230°C and a mold temperature of 60-120°C.

MOCOM Compounds ALCOM® LD PC 1000 UV 14095 GY1198-14 is a polycarbonate-based resin with a special filler/additive system that is UV stabilized and translucent, with high light diffusion and good flow. It has been approved by GS93016 and is suitable for injection molding with a melt temperature of 270-310°C and a mold temperature of 80-110°C. It is suitable for a variety of applications such as lamp covers, display elements and operating elements in the automotive and lighting market segments.

MOCOM Compounds ALTECH® ABS A 1000/106 BL1249-05LS is a base polymer of Acrylonitrile/Butadiene/Styrene/Copolymer which has easy flow, processing stabilized, injection molding grade, and laser etchable (light etching) features. It is suitable for electrical and electronic, various, and domestic appliances, various, injection molded parts applications. Pre-drying is required, with conditions including 80°C in an air circulating dryer for 3-6 hours, and 80°C in a dry air (desiccant) dryer for 2-4 hours depending on moisture content, with a maximum moisture content of <0.20%. Furthermore, injection molding requires a melt temperature of 200-240°C and mold temperature of 50-80°C.

MOCOM Compounds ALTECH® ABS A 1000/206 is a base polymer acrylonitrile/butadiene/styrene/copolymer used in various market segments for injection molded parts. For pre-drying, conditions should be 80°C in an air circulating dryer for 3-6 hours and 80°C in a dry air (dessiccant) dryer for 2-4 hours, depending on moisture content, with a maximum moisture content of less than 0.20%. For processing, injection molding requires a melt temperature of 200-240°C and a mold temperature of 50-80°C.

MOCOM Compounds CELLIDOR® CP FC 400.01-08 is a base polymer composed of cellulose acetate propionate containing 8% phthalate-free plasticiser. It is suitable for injection molding parts, food contact and typical applications such as toothbrushes. Pre-drying conditions should be in an air circulating dryer at 60-90°C for 2-4 h, depending on moisture content, with a maximum moisture content of 0.15%. Processing should be injection molding with a melt temperature of 180-230°C and a mold temperature of 40-80°C. To ensure quality, keep it dry and protected from light.

MOCOM Compounds ALTECH® NXT PP -H A 2030/450.02 GF30 CP is a polypropylene homopolymer filled with 30% glass fibers, chemically coupled and high heat stabilized, providing high stiffness and high toughness. It is suitable for various injection molded parts in the automotive market segment. Processing injection molding requires a melt temperature of 200-250°C and a mold temperature of 20-70°C.

MOCOM Compounds ALCOM® LDDC PC 1000 UV 17182 BK1187-17 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized. It is suitable for use in the Automotive and Lighting market segments, primarily for light transparent components and Black Panel-Technology. Typical applications include display elements and operating elements.

MOCOM Compounds ALCOM® HM PP 3030 14029 is a polypropylene with 30% glass beads, hygienic material and gray color, featuring antibacterial properties according to ISO 22196. It is used in the packaging, personal care, household goods, furniture, building and construction markets. Typical applications include sanitary articles, hygiene products, domestic appliances, kitchen ware, functional components, housings, handles, fittings, containers, and caps/closures. Injection molding requires a melt temperature of 200-270°C and a mold temperature of 20-90°C, with a maximum moisture content of <0.10%.

MOCOM Compounds ALFATER® XL A30I 4GP0000 is a thermoplastic vulcanisate (PP+EPDM) with a natural color and bright inherent color. It is widely used in the automotive, building and construction, electrical and electronic, sport and leisure, and furniture markets for injection molded parts such as seals, sealing lip, handles, racking/shelving, soft touch elements, impact protection/shock absorber, protection caps, thin walled parts, profile, cable ducts, and 2K components. Furthermore, it has good adhesion to Polypropylene Homopolymer, Polypropylene Copolymer, polyethylene, Thermoplastic Vulcanisate (PP+EPDM), Thermoplastic Olefin Elastomer, and Thermoplastic Elastomer general.

MOCOM Compounds ALFATER® XL A90I 3EF0010 is a black thermoplastic vulcanisate (PP+EPDM) that is used for injection molding. It has special features of easy flow, high surface quality, weathering dry, hot (Kalahari, PV3929), weathering moist, hot (Florida, PV3930), good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is used in the automotive, building and construction, electrical and electronic, sport and leisure, and furniture market segments for injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, thin walled parts, profiles, cable ducts, 2K components, and casters. It has an adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer generally.

MOCOM Compounds TEDUR® R 9519 is a special injection molding grade containing 45% glass fibers and recycled material, making it suitable for applications such as fixing elements and lamp sockets. Pre-drying is required in a dry air (desiccant) dryer at 130-140°C for 2-4 hours, depending on the moisture content. During processing, injection molding should be done with a melt temperature of 320-340°C and a mold temperature of at least 140°C.

MOCOM Compounds ALCOM® PC 740/4 GY1281-04LD is a polycarbonate base polymer with a special filler/additive system that provides light scattering, high light transmission, and good flow. It has been approved by GS93016 and is widely used in the automotive and lighting markets for applications such as lamp covers, display elements, and operating elements. Injection molding requires a melt temperature of 270-310°C and a mold temperature of 80-110°C. The product should be stored in a dry, light-protected environment to ensure its quality.

MOCOM Compounds ALTECH® PP-H B 2030/156 GF30 is a polypropylene homopolymer with 30% glass fibers, which are chemically coupled and have easy release (demolding) features. It is used for processing injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It is suitable for medical/personal care, building, and construction applications such as housings, pump impellers, and functional components.

MOCOM Compounds ALTECH® PC A 1000/326 UV is a polycarbonate plastic that is UV stabilized and can be used in a variety of applications. For injection molding, the melt temperature should be between 270-310°C, and the mold temperature should be between 80-110°C.

MOCOM Compounds ALCOM® PC 740/4 GY1111-09LD is a polycarbonate base polymer with a special filler/additive system, colored similar to RAL 7015, featuring light scattering and good flow. It is intended for use in the automotive and lighting market segments for applications such as lamp covers, display elements, and operating elements.

MOCOM Compounds ALFATER® XL A65I 2GP0050 is a black thermoplastic vulcanisate (PP+EPDM) with good recovery, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is suitable for use in injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, and 2K components. It can be adhered to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general. It has excellent durability and performance.

MOCOM Compounds ALTECH® ABS A 1000/729 UV is a base polymer of Acrylonitrile/Butadiene/Styrene/Copolymer with special features of high surface quality and UV stabilization, making it suitable for typical applications such as housings. Pre-drying conditions should be 80°C in a dry air (dessiccant) dryer for 2-4 hours, or 80°C in an air circulating dryer for 3-6 hours depending on moisture content. For processing injection molding, the melt temperature should be between 220-260°C and mold temperature between 50-80°C.

MOCOM Compounds ALCOM® POM 770/1 SI2 is a heat-stabilized, improved sliding/wear Polyoxymethylene Copolymer with a 2% silicone filler/additive system. It is typically used for bearings and sliding elements, functional components, gear wheels, and roller bearings in the automotive and machinery market segments. For processing injection molding, the melt temperature should be between 180-220°C and the mold temperature should be between 60-120°C. It should be pre-dried in a dry air (desiccant) dryer at 100-110°C for 2-3 hours or an air circulating dryer at 100-110°C for 3-5 hours depending on moisture content.

MOCOM Compounds ALFATER® XL A65I 2GP0000 is a thermoplastic vulcanisate (PP+EPDM) polymer suitable for injection molding. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. Its market segment includes automotive, building and construction, electrical and electronic, machinery, and furniture, and its applications include injection molded parts, seals, sealing lip, handles, soft touch elements, impact protection/shock absorber, protection caps, cable ducts, casters, plugs, fastener & connector, and 2K components.

MOCOM Compounds TEDUR® L 9217-1 S is a polyphenylene sulfide base polymer filled with 65% glass fiber/mineral and is used in the automotive, machinery, and lighting market segments. It has special features such as high stiffness, hot oil resistance, and good hydrolysis resistance, and is typically used for highly stressed parts. Pre-drying conditions should be done in a dry air (dessiccant) dryer at 130-140°C for 2-4 hours, depending on the moisture content. Processing injection molding should be done at a melt temperature of 320-340°C and a mold temperature of greater than 140°C.

MOCOM Compounds ALCOM® LD2 PC 1000 UV CC1118-19 is a polycarbonate-based material with a special filler, UV stabilization, high light transmission, light scattering, and high light diffusion, as well as good flow. It is used in the automotive and lighting markets and its typical applications include lamp covers, display elements, and operating elements. This material is approved by GS93016 and is suitable for injection molding with a melt temperature of 270-310°C and a mold temperature of 80-110°C. It should be stored in a dry and light-proof environment.

MOCOM Compounds ALTECH® PP-H FC 1000/576 is a polypropylene homopolymer used in processing injection molding with a melt temperature of 200-240°C and a mold temperature of 20-70°C. It is nucleated and used in the food processing industry, building and construction, and electrical and electronic industries for the production of household goods, electrical components, domestic appliances, filter systems, injection molded parts, functional components, and housings. For optimal performance, it should be kept in the dark at temperatures not exceeding 30°C.

MOCOM Compounds ALCOM® HM PA6 1000 SB1038-21 is a pre-dried polyamide 6 with a hygienic filler/additive system, colored black, with antibacterial properties according to ISO 22196. It is designed for automotive, personal care, electrical and electronic, furniture, building and construction, and sport and leisure applications, and is suitable for injection molding with a melt temperature of 250-270°C and a mold temperature of 40-80°C. Typical applications include sanitary articles, hygiene products, domestic appliances, functional components, housings, handles, fittings, and clothing/fasteners.

MOCOM Compounds ALCOM® LB ECO PC+ABS 1000 SL WT1023-21 is a pre-dried injection molding grade with a polycarbonate + acrylonitrile butadiene styrene blend. It is highly reflective, contains recycled material, has anti-squeak modifications, and is opaque. It is used in the automotive, electrical and electronic, and lighting markets and is typically used for light guides and reflectors. When processing injection molding, the melt temperature should be 240-280°C and the mold temperature should be 70-100°C.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 15061 CC1104-15 is a polycarbonate-based polymer with a special filler/additive system and UV stabilization. The injection molding processing requires a melt temperature of between 270-310°C and a mold temperature of between 80-110°C. It has excellent light transmission properties, dependent on wall thickness, as well as light scattering and easy flow capabilities. It is used in automotive, lighting, and other applications such as lamp covers, display elements, and operating elements. It has been approved by GS93016 and is suitable for a wide range of applications.

MOCOM Compounds ALCOM® LB PC 1000 15022 WT1037-15 is a polycarbonate base polymer with a special filler/additive system that features high reflectivity and opacity, as well as easy flow. It is used in automotive and lighting market segments for light guides, reflectors, and light blocking components. For processing injection molding, the melt temperature should be between 280-320°C and the mold temperature should be between 80-110°C. The material should be stored in a cool, dry place to ensure optimal performance.

MOCOM Compounds ALFATER® XL A60I 2UV0000 UV is a thermoplastic vulcanisate (PP+EPDM) with natural color and UV stabilization, suitable for injection molding. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance, making it suitable for applications such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners and connectors, and 2K components. Additionally, it has excellent adhesion to various materials.

MOCOM Compounds CELLIDOR® CP 300-13 is a pre-drying condition polymer made of cellulose acetate propionate and 13% phthalate-free plasticiser. It is typically used for various applications. For injection molding, the melt temperature should be between 180-230°C and the mold temperature should be between 40-80°C. The maximum moisture content should not exceed 0.15%.

MOCOM Compounds ALTECH® PP-H FC 4940/100 TV40 is a Polypropylene Homopolymer with a filler/additive system of 40% talcum which offers high stiffness, high heat stabilization, processing stabilization, and easy release (demolding). It is suitable for applications in the electrical and electronic, building and construction, and personal care market segments, such as kitchenware, functional components, housings, and other household goods. To ensure its optimal performance, pre-drying conditions should be completed, and the processing injection molding should be carried out at specific melt and mold temperatures.

MOCOM Compounds CELLIDOR® B 501-10 is a Base Polymer of Cellulose Acetate Butyrate that has been pre-dried in either a dry air (dessiccant) dryer at 50-70°C for 1-2 h or an air circulating dryer at 50-70°C for 2-4 h. It is suitable for Processing Injection molding with a melt temperature of 190-235°C and a mold temperature of 40-80°C and is formulated with a phthalate-free plasticiser and other additives to provide good chemical resistance, high light transmission, high surface quality, processing stabilization, injection molding grade, good haptics, and good weathering resistance, making it suitable for various market segments and applications areas with typical applications.

MOCOM Compounds ALTECH® ECO PC 1000/141 FR IM is a polycarbonate base polymer with features like UV stabilization, easy release, flame retardance, and impact modification. It is widely used in injection molded parts such as housings, security engineering parts, sockets, plugs, and connectors for the electrical and electronic and lighting industries.

MOCOM Compounds CELLIDOR® CP 400-12 is an injection molding grade polymer made of Cellulose Acetate Propionate. This product requires pre-drying in an air circulating dryer at 50-80°C for 2-4 hours, depending on moisture content. It contains 12% phthalate-free plasticizer and can be used for various applications.