Products

MOCOM Compounds ALTECH® PP-H A 4930/506 MR30 is a polypropylene homopolymer with a filler/additive system of 30% talcum and is heat-stabilized, and includes a slip agent for easy release (demolding). It is suitable for electrical and electronic parts, as well as injection molded parts. The processing of injection molding should be done at a melt temperature of 200-250°C and a mold temperature of 20-70°C.

MOCOM Compounds Alcom® DET PP FC 8010 14084 is a detectable polypropylene base polymer with a 10% metal filler/additive system, designed for injection-molded parts in food contact packaging applications. It is suitable for the production of fixtures/fittings, cable ties, caps/closures, and other injection-molded components.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 14068 GY1159-14 is a polycarbonate base polymer with a special filler/additive system that provides translucent, light scattering, high light diffusion, and easy flow properties. It is suitable for automotive and lighting applications, such as lamp covers, display elements, and operating elements, and is approved by GS93016. The processing injection molding requires a melt temperature of 270-310°C and a mold temperature of 80-110°C. It should be stored in a dry place and protected from light to ensure optimal performance.

MOCOM Compounds ALTECH® PP-B A 2020/157 GF20 CP is a polypropylene heterophasic copolymer containing 20% glass fibers that is chemically coupled, processing stabilized, easy to release (demolding), and heat stabilized. It is typically used in building and construction for exterior parts such as air ducts and functional components. For optimal results, pre-drying conditions should be done in a dry air (dessiccant) dryer at 80-120°C for 2-3 h or in an air circulating dryer at 80-120°C for 2-4 h. For injection molding, the melt temperature should be set to 200-250°C and the mold temperature should be set to 20-70°C.

MOCOM Compounds ALTECH® PA6 A 2003/712 GF3 IM UV is a polyamide 6 with a 3% glass fiber filler/additive system. It has been impact modified, fast solidifying, has easy demolding and is UV and processing stabilized. It is suitable for injection molding with a melt temperature of 250-270°C and a mold temperature of 40-80°C and is used in the automotive, machinery, building and construction and sport and leisure market segments. Typical applications include functional components and it should be stored dry, protected from light and not above 30°C.

LUPOLEN KONZENTRAT AB 20 GF is a high-quality additive designed for use in polyethylene low density. It contains an anti-blocking agent and silica as a filler/additive system. The recommended dosage for extrusion is 3-5%. It is important to store this product in a dry place and protect it from light.

MOCOM Compounds ALTECH® PC A 1000/500 is a polycarbonate-based product with easy flow, heat stabilization, and easy release (demolding) features. It is suitable for various injection-molded parts. Before processing, it should be pre-dried under 120°C in a dry air (desiccant) dryer for 2-3 hours, or in an air circulating dryer at 100-120°C for 4-12 hours depending on the moisture content, with a maximum moisture content of <0.02%. During processing, it should be injection-molded at a melt temperature of 270-310°C and a mold temperature of 80-110°C. After processing, it should be protected from light and stored at a temperature not exceeding 30°C.

MOCOM Compounds ALTECH® PP-B A 4430/100 MR30 is a polypropylene heterophasic copolymer with 20% chalk and 10% talcum. It is heat stabilized and has easy release (demolding) and processing stabilized characteristics. For injection molding, the melt temperature should be 200-250°C and the mold temperature should be 20-70°C. This material is applicable in the building and construction, sport and leisure markets and is typically used for housings and functional components. It should be stored in a dry, light-protected environment, not above 30°C, for optimal results.

MOCOM Compounds ALFATER® XL D50I 2GP0050 is a black thermoplastic vulcanisate (PP+EPDM) with excellent recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for use in automotive, building and construction, electrical and electronic, machinery, and furniture applications, and is used for injection molded parts such as seals, sealing lips, handles, impact protectors/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, and 2K components. It also has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALTECH® ABS FC 1000/106 BK1280-05 is a pre-dried Acrylonitrile/Butadiene/Styrene/Copolymer with easy flow, processing stabilized and injection molding grade features. It has a maximum moisture content of less than 0.20%. The recommended pre-drying conditions are 80°C in an air circulating dryer for 3-6 hours and 80°C in a dry air (dessiccant) dryer for 2-4 hours, depending on moisture content. This material can be used in various markets, such as the food processing industry, and is suitable for applications such as domestic appliances and injection molded parts with food contact. It is ideal for food industry applications that require a low absorption rate.

MOCOM Compounds TEDUR® L 9511-2 is a Polyphenylene Sulfide (PPS) base polymer filled with 45% glass fibers that offers high stiffness. It is typically used in the automotive, machinery, and injection molded parts markets for applications such as pump components, pump impellers, housings, and high pressure vessels. Pre-drying conditions for TEDUR® L 9511-2 involve drying in a dry air (dessiccant) dryer at 130-140°C for 2-4 hours depending on the moisture content. Processing injection molding requires a melt temperature of 320-340°C and a mold temperature of less than 140°C.

MOCOM Compounds ALTECH® PC A 1000/121 UV IM should be pre-dried under conditions of 120°C in a dry air (dessiccant) dryer for 2-3 hours, or in an air circulating dryer at 100-120°C for 4-12 hours depending on moisture content, with a maximum moisture content of 0.02%. For processing through injection molding, the melt temperature should be set between 270-310°C, and the mold temperature between 80-110°C. The base polymer is polycarbonate, and the filler/additive system is UV stabilized and impact modified. Typical applications are varied, and the product should be handled with care to avoid damage.

MOCOM Compounds ALTECH® SAN A 1000/587.01 is a Styrene/Acrylonitrile/Copolymer that has improved stress cracking resistance, good chemical resistance, high stiffness, high surface gloss, easy release (demolding), and good flow. It is suitable for various applications and should be stored dry and protected from light at temperatures not exceeding 30°C. The recommended processing injection molding temperature range is 210-260°C for the melt and 40-80°C for the mold.

MOCOM Compounds ALFATER® XL A80I 2FE0002 is a thermoplastic vulcanisate (PP+EPDM), black in color, with a high density and noise dampening properties. It is suitable for injection molding, with a melt temperature of 195-230°C and mold temperature of 10-70°C. It has good weathering resistance, is resistant to alkalis, has good ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for applications in the automotive, machinery, building and construction, and electrical and electronic sectors, and has a service temperature range of -40-125°C. For optimal performance, it should be stored dry, protected from light, and tightly sealed, preferably at temperatures not exceeding 30°C.

MOCOM Compounds ALTECH® ABS A 1000/187 is an Acrylonitrile/Butadiene/Styrene/Copolymer with easy flow, processing stabilized, and injection molding grade features. It is suitable for various injection molded parts applications and has a maximum moisture content of <0.20%. For processing injection molding, the melt temperature should be between 200-240°C and the mold temperature should be between 50-80°C. Additionally, it should be stored in a dry and light-protected environment not exceeding 30°C.

MOCOM Compounds ALTECH® PP-H FC 1000/100 DS is a polypropylene homopolymer that has special features such as detergent solution stabilization, good hydrolysis resistance, easy release (demolding) and a slip agent, as well as being heat stabilized. It is suitable for use in the electrical and electronic, packaging, and building and construction markets for applications such as food contact, injection molded parts and exterior parts. Typical applications include functional components and housings. For injection molding, processing should be done with a melt temperature of 200-240°C and a mold temperature of 20-70°C.

MOCOM Compounds ALCOM® ABS 530/22 SV1287-04MCS is a Base Polymer of Acrylonitrile/Butadiene/Styrene/Copolymer with a metallic effect color. It has good flow and is typically used to make housings for domestic appliances. Pre-drying Conditions include 80°C in an air circulating dryer for 3-6 hours and 80°C in a dry air (dessiccant) dryer for 2-4 hours depending on moisture content. For processing Injection molding, the melt temperature should be between 220-260°C and the mold temperature should be between 50-80°C.

MOCOM Compounds ALCOM® PC 740/4 UV OR1075-05LD is a polycarbonate base polymer with a special filler/additive system that provides light scattering, high light diffusion, and translucency similar to RAL 2003. It is UV stabilized and approved by GS93016, suitable for automotive and lighting segment applications such as lamp covers, display elements, and operating elements. For injection molding, the suggested melt temperature should be 270-310°C and the mold temperature should be 80-110°C.

MOCOM Compounds ALCOM® PBT 700/1 GF20 PTFE15 is a polybutylene terephthalate base polymer with a filler/additive system of 20% glass fibers and 15% PTFE. It boasts improved sliding/wear, high stiffness, and is used in automotive and machinery markets for gear wheels, roller bearings, functional components, bearings, and sliding elements.

MOCOM Compounds ALTECH® PA6 A 1000/518 IM is a Polyamide 6 impact modified base polymer designed for easy release (demolding). Pre-drying should be done at 80°C in a dry air (dessiccant) dryer for 2-12 h depending on moisture content, with a maximum moisture content of 0.15%. It is suitable for automotive, machinery, and injection molded parts applications. The processing injection molding melt temperature should be between 250-270°C and the mold temperature should be between 40-80°C.

MOCOM Compounds ALCOM® ASA/PC 540/5 UV GY81-714MCF is a UV stabilized polycarbonate + Acrylonitrile Styrene Acrylate Blend with a metallic color and low tendency to flow lines. It is typically used for housings and is suitable for electrical and electronic, building and construction, and sport and leisure market segments. Pre-drying Conditions for this material are in a dry air (dessiccant) dryer 90-110°C for 2-4 hours, in an air circulating dryer 90-110°C for 4-8 hours depending on moisture content. Processing Injection molding involves using a melt temperature of 260-300°C and a mold temperature of 60-90°C. It is important to note that the material should be dried prior to molding to ensure optimal performance.

MOCOM Compounds ALCOM® PP 620/2 SV1246-04MCO is a pre-drying condition polypropylene homopolymer with a metallic effect and optimized flow line for easy flow. It is used for applications such as housings in the household goods industry and is processed through injection molding with a melt temperature of 200-270°C and a mold temperature of 20-70°C.

MOCOM Compounds ALTECH® ABS A 1000/100 GY1079-19 is a heat and processing stabilized Acrylonitrile/Butadiene/Styrene/Copolymer (ABS) polymer with an antioxidant filler/additive system, suitable for the production of various injection molded parts for a variety of markets and applications. The recommended melt temperature for injection molding is 200-240°C and the mold temperature should be 50-80°C.

MOCOM Compounds ALTECH® PP-B A 4915/500 MR15 is a polypropylene heterophasic copolymer with 15% talcum as a filler/additive system. It has high heat stabilization, processing stabilization, and easy release (demolding) characteristics. The melting temperature for injection molding is 200-250°C and the mold temperature is 20-70°C. This material is suitable for automotive, building and construction market segments with typical applications such as housings, fixing elements, functional components and interior decoration/finishing, gardening tools, clothing/fasteners and exterior parts. To ensure optimum performance, it should be stored in a dry, light-protected environment not exceeding 30°C.

MOCOM Compounds ALCOM® MS PP 4920 GY1233-20 is a polypropylene heterophasic copolymer with 20% talcum as a filler/additive system. It is heat stabilized, scratch resistant, UV stabilized, and impact modified, making it suitable for automotive applications such as housings and fasteners. For optimal results, it should be pre-dried before processing. Injection molding should be used to process it, with a melt temperature of 200-270°C and a mold temperature of 20-70°C.

MOCOM Compounds ALCOM® PBT 700/9 BK2034-06MCS is a polybutylene terephthalate base polymer with a matt (textured) surface, used in building and construction, fixtures/fittings, household goods, and kitchenware for various applications. For optimal results, it should be pre-dried in a dry air (dessiccant) dryer at 100-120°C for 2-4 hours or in an air circulating dryer at 100-120°C for 4-8 hours, depending on moisture content. During processing, injection molding should be used with a melt temperature of 250-270°C and a mold temperature of 60-100°C. To ensure maximum product quality, the product should be protected from light at temperatures not exceeding 30°C.

MOCOM Compounds ALTECH® ABS A 1000/227 UV is a special UV-stabilized Acrylonitrile/Butadiene/Styrene/Copolymer base polymer that is suitable for injection molding with melt temperatures between 200-240°C and mold temperatures between 50-80°C. This polymer is ideal for applications such as housings, clothing/fasteners, and building and construction. It is essential to pre-dry the polymer under conditions of 80°C in a dry air (dessiccant) dryer for 2-4 hours and 80°C in an air circulating dryer for 3-6 hours, depending on moisture content, with a maximum moisture content of 0.20%. Furthermore, it should be stored in a dry environment that is protected from light and not above 30°C.

MOCOM Compounds ALTECH® PS-HI A 1000/901 BK1261-20 is a polystyrene-based injection-molding grade with easy-release (demolding) and impact properties, making it suitable for use in the automotive, electrical and electronic, and building and construction markets for injection-molded parts such as bezels and housings. Pre-drying conditions involve a dry-air (dessiccant) dryer at 60-80°C for 2-3 hours, or an air-circulating dryer at 60-80°C for 2-3 hours. Processing injection-molding requires melt temperatures of 180-260°C and mold temperatures of 10-70°C. This material should be stored in a cool, dark place to protect it from light.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 16104 WT2288-09TL is a polycarbonate base polymer filled/additive system with UV stabilizers and light scattering special features for the Automotive and Lighting market segments. Its typical applications include lamp covers, display elements, and operating elements, and it has been approved by GS93016. Pre-drying conditions should be 120°C in a dry air (dessiccant) dryer for 2-4 hours and 120°C in an air circulating dryer for 4-12 hours with a maximum moisture content of <0.02%. Processing injection molding should be done at a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALCOM® POM 770/1 SLBV is a polyoxymethylene copolymer with a special filler and improved sliding/wear and heat stabilized properties. It is typically used in functional components, bearings, and sliding elements in the automotive and machinery industry and can be processed using injection molding with a melt temperature of 180-220°C and a mold temperature of 60-90°C. Pre-drying should be done using either a dry air (dessiccant) dryer or an air circulating dryer at 100-110°C for 2-3 hours or 3-5 hours respectively, depending on the moisture content.

MOCOM Compounds ALCOM® PC 740/4.2 UV WT1090-08LD2 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and has translucent, light scattering, high light diffusion, and good flow properties. It is used in the automotive and lighting market segments for applications such as lamp covers, display elements, and operating elements and is approved by GMW15702 and GM3013.

MOCOM Compounds Alcom® DET PA66 FC 8010 15041 is a detectable injection-molding grade polyamide 66 base polymer with a metal filler/additive system. Specially designed for food contact packaging, it is suitable for the production of fixtures/fittings, cable ties, caps/closures, and other injection-molded components.

MOCOM Compounds ALPERFORM® PE SL FC 0207-14 OA is a base polymer of polyethylene low density with a filler/additive system of 2% lubricant. It has special features of slip agent, migration towards the surface, food contact, high additive content, free from cadmium, lead and diarylide pigments, high dispersibility, and dust-free. It is suitable for injection molding with a melt temperature of 180-240°C and a mold temperature of 20-40°C, as well as extrusion dependent on the application and operational area. It is recommended for use in the food processing industry, household goods, packaging, and other injection molded, extruded, and blow molded parts.

MOCOM Compounds ALCOM® HTC 300/1 WT1056-10LD is a high temperature copolyester base polymer which is pre-dried with 90°C in a dry air (dessiccant) dryer for 4-6 hours to a maximum moisture content of <0,03%. It is equipped with a special filler/additive system for light scattering and high light diffusion, and is intended to be utilized in the automotive and lighting market segments for lighting and light transparent components, such as lamp covers, display elements, and operating elements. The process of injection molding requires a melt temperature of 260-280°C and a mold temperature of 50-70°C. Additionally, the product should be stored in a dry and light-protected area.

MOCOM Compounds ALCOM® ABS 530/29 UV SV1269-05MCS is a UV-stabilized acrylonitrile/butadiene/styrene/copolymer with good flow and a metallic color. It is used in building and construction and sport and leisure markets for domestic appliance housings. For injection molding, it should be melted at a temperature of 220-260°C and molded at a temperature of 50-80°C.

MOCOM Compounds ALCOM® PBT 700/8 GF15 PTFE15 is a base polymer composed of polybutylene terephthalate and a filler/additive system of 15% glass fibers and 15% PTFE. It has special features such as improved sliding/wear, high stiffness, good hydrolysis resistance, and heat stabilization. It is typically used in automotive and machinery market segments for functional components, bearings, and sliding elements such as gear wheels and roller bearings. Processing injection molding requires a melt temperature of 250-270°C and a mold temperature of 80-120°C.