Products

ELASTOSIL® RT 772 is a flowable, condensation-curing RTV-2 silicone used for potting and coating applications. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 772 offers excellent long-term stability against weathering, moisture, and UV light. The silicone elastomer can endure constantly changing climatic conditions, UV radiation, and temperatures as high as 230°C (446°F) without damage.

ELASTOSIL® SOLAR 2203 is a pourable, addition-curing, RTV-2 silicone rubber used for potting, lamination, and encapsulation purposes. The product vulcanizes at room temperature to yield a very soft silicone gel. ELASTOSIL® SOLAR 2203 displays pronounced inherent tack and excellent long-term stability against weathering, moisture, and UV light. The soft silicone gel can continuously withstand changing climatic conditions, UV radiation, and temperatures up to 160°C (320°F) without damage.

LUMISIL® 903 A/B is a low-viscosity, addition-curing two-part silicone that, when mixed in a 1:1 ratio, cures to a flexible and highly transparent silicone rubber. This flowable silicone offers rapid heat curing, and upon vulcanization, it forms a highly transparent rubber material.

ELASTOSIL® RT 607 A/B is a pourable, addition-curing RTV-2 silicone rubber with a two-part formulation and a 9:1 mixing ratio. It has low viscosity and offers rapid heat cure. The cured rubber exhibits high hardness and excellent heat stability. Additionally, it is flame retardant, making it suitable for general purpose encapsulation. This product can also be used as a potting material for electrical coils of lifting magnets and for slot exit potting of electrical coils.

ELASTOSIL® RT 602 A/B is a pourable, addition-curing RTV-2 silicone rubber with a two-part formulation and a 9:1 mixing ratio. It has low viscosity and offers rapid heat cure. The cured rubber exhibits a medium hardness and excellent heat stability. This product is suitable as a general purpose encapsulant.

ELASTOSIL® RT 745 S" A/B" is a pourable, two-part silicone rubber that can be thermally cured. It is an addition-curing type, making it suitable for various applications. Some notable industries where it finds use are automotive, electronics, and measurement and control. Specifically, it is employed in potting and encapsulation processes, ensuring the protection and stability of sensitive components and systems.

SEMICOSIL® 9242 is a pourable, thermally curable, addition-curing one-part silicone rubber that cures to a very soft silicone gel. This product is ready-to-use, requiring no additional mixing. It exhibits thixotropic behavior, meaning it becomes shear-thinning during application. SEMICOSIL® 9242 offers rapid heat curing, allowing for efficient processing. Upon vulcanization, it forms a soft gel. With low levels of volatiles, uncured polymers, and ions, this silicone rubber ensures high purity. Additionally, SEMICOSIL® 9242 has the additional feature of ultraviolet fluorescence.

POWERSIL® GEL A/B is a pourable, two-component silicone mixture that cures at room temperature to form a transparent, very soft silicone gel. The resulting vulcanizate exhibits excellent mechanical damping properties, providing effective vibration absorption. Additionally, this gel is non-bleeding, ensuring its stability and integrity over time.

POWERSIL® GEL FC A/B is a pourable, two-component silicone mixture that cures at room temperature to form a soft silicone gel. This product exhibits a very fast curing behavior, allowing for quick processing times. The resulting vulcanizate is transparent and possesses excellent mechanical damping properties, making it suitable for applications requiring vibration absorption. Furthermore, it is a non-bleeding gel, ensuring its stability and reliability.

ELASTOSIL® RT 604 A/B is a pourable, addition-curing two-part silicone rubber that vulcanizes at room temperature. It is a highly transparent, flowable material with very low viscosity. This two-component general-purpose encapsulant features rapid heat cure, low hardness, and a crystal-clear appearance.

POWERSIL® 552 Browngreen is a one-component silicone dispersion that, upon curing, forms a tough high voltage insulator coating with excellent electrical properties. It exhibits very good resistance to weathering and outstanding tracking resistance. Additionally, POWERSIL® 552 Browngreen creates a long-term hydrophobic surface, preventing the formation of wet conductive films and minimizing the risk of pollution flashovers.

ELASTOSIL® E70 is a flowable, one-component, acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent primerless adhesion to many substrates and outstanding heat stability even in long-term exposure. It is a high-temperature-resistant grade for sealing and bonding applications under high thermal stress.

WACKER® Catalyst C 05 is a highly active, diluted platinum catalyst specifically designed for the thermal curing of solvent-based and solvent-free addition-crosslinking silicones. It exhibits very high and constant catalyst activity, making it ideal for use in automated mixing units. This catalyst enables rapid curing of addition-crosslinking silicone systems, providing efficient and reliable results. Additionally, WACKER® Catalyst C 05 is miscible with silicones in all proportions.

ELASTOSIL® RT 707 W is a flowable, one-part, heat-curing silicone used for potting and coating applications. The cured material demonstrates very good adhesion to many substrates and long-term stability against weathering, moisture, and UV light. The cured silicone rubber can continuously withstand constantly changing climatic conditions, UV radiation, and temperatures as high as 230°C (446°F) without sustaining damage.

POWERSIL® 567 is a one-component silicone dispersion that, upon curing, forms a durable high-voltage insulator coating with excellent electrical properties. It exhibits very good resistance to weathering and outstanding tracking resistance. Moreover, POWERSIL® 567 creates a long-term hydrophobic surface, effectively preventing the formation of wet conductive films and reducing the risk of pollution flashovers.

ELASTOSIL® N10 Transparent is a solvent-free, neutral-cure, low-viscous, and non-thixotropic silicone sealant that cures at room temperature under the influence of atmospheric moisture. It exhibits excellent primerless adhesion to many substrates. It is a multipurpose grade for bonding, sealing, and potting, e.g. in electronic applications.

ELASTOSIL® RT 675 A/B is a pourable, addition-curing RTV-2 silicone rubber with a two-part formulation and a 1:1 mixing ratio. It features a very high hardness (Shore A) and excellent heat stability. This silicone rubber is particularly known for its high thermal conductivity, making it ideal for the encapsulation of electronic components.

ELASTOSIL® RT 706 is a self-leveling, slightly thixotropic, one-part heat-curing silicone used for potting and coating applications. The cured material demonstrates very good adhesion to many substrates and long-term stability against weathering, moisture, and UV light. The cured silicone rubber can continuously withstand constantly changing climatic conditions, UV radiation, and temperatures as high as 230°C (446°F) without sustaining damage.

WACKER® Silicone Paste P 12 is a pure white, soft-consistency heat sink paste with marked thermal conductivity. It is electrically insulating. WACKER® PASTE P 12 is used especially in semiconductor technology as a heat sink paste. When there is a need for good heat transfer from a semiconductor to a cooling element, applying a thin coating of WACKER® PASTE P 12 is advisable. In the assembly of semiconductors such as diodes, transistors, and thyristors, microscopic irregularities may exist on the mating surfaces of the semiconductor and the cooling surface. These surface irregularities can hinder firm metal-to-metal contact when assembled.

ELASTOSIL® N 2010 is a self-leveling, one-component silicone sealant that cures at room temperature under the influence of moisture. It is a ready-to-use, acid- and solvent-free, non-corrosive RTV-1 (room temperature vulcanizing, 1-component) silicone rubber suitable for many applications. It exhibits good adhesion to plastics and metals, along with elasticity and durability, making it suitable for a wide range of potential uses.

SEMICOSIL® 924 is a pourable, thermally curable, addition-curing one-part silicone rubber that cures to a very soft silicone gel. It is a ready-to-use product, requiring no additional mixing. SEMICOSIL® 924 exhibits thixotropic flow, allowing for easy application. Upon vulcanization, it forms a soft gel. This silicone rubber has low levels of volatiles and uncured polymers, contributing to its high purity. It also boasts a low ion content. SEMICOSIL® 924 maintains almost constant properties within a broad temperature range, from -50 °C to +180 °C.

ELASTOSIL® E91 Transparent is a self-leveling silicone rubber with very good mechanical properties that cures at room temperature under the influence of atmospheric moisture. Curing can be accelerated in a steam oven. It is a multipurpose glue for textile coatings, e.g. antislip coatings.

ELASTOSIL® RT 646 A/B is a castable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. It is a flowable material with resistance against casting resins, making it suitable for various applications such as encapsulation of electronic components, all-round potting compound, and mold making in reproduction molding.

WACKER SilGel® 612 EH A/B is a two-part, pourable, addition-curing RTV-2 silicone rubber. It is a modified version of WACKER SilGel® 612, offering increased hardness and reactivity. With a 1:1 mixing ratio, this product ensures a convenient and precise blending process. It exhibits rapid curing properties and retains a low hardness.

GENIOSIL® STP-E 10 is a polyether-based silane-terminated polymer suitable as a binder in moisture-curing formulations. It differs from conventional silylated polymers due to its high reactivity, which results from the structural proximity of the nitrogen atom to the silicon atom in the dimethoxy(methyl)silyl-methylcarbamate group (alpha-effect). It hydrolyzes in the presence of moisture to form a stable siloxane network initiated by mild catalysis, rather than heavy metal ions.

WACKER® Crosslinker V 90 is a solvent-free hydrogenpolysiloxane containing reactive Si-H groups. It is known for its fast curing properties, good release stability, and excellent anchorage to a wide variety of substrates. The fast-curing properties of WACKER® Crosslinker V 90 also enable the use of a low platinum concentration.

WACKER® Catalyst OL is a highly active and concentrated platinum catalyst specifically developed for the thermal curing of solvent-based and solvent-free addition-crosslinking silicones. This catalyst exhibits exceptional and consistent activity, providing rapid curing for addition-crosslinking silicone systems. With its high concentration of platinum, it offers efficient performance. Moreover, it is miscible with silicones in any proportion.

ELASTOSIL® N 2076 is a flowable, one-part silicone rubber for coating and encapsulation applications. When exposed to air moisture, it cures at room temperature to yield a permanently flexible silicone rubber with good heat resistance and excellent flame retardant properties. Fully vulcanized ELASTOSIL® N 2076 shows long-term stability against weathering, moisture, and UV radiation. The silicone elastomer may continuously be exposed to constantly changing climatic conditions, UV radiation, and temperatures as high as 180°C (356°F) without damage.

DEHESIVE® SF 201 AMA® is a solvent-free, addition-curing silicone fluid. It is designed for release applications and is applied with additional components on paper and filmic substrates. The fast cure properties of DEHESIVE® SF 201 AMA® allow for use with temperature-sensitive substrates or comparatively low platinum levels at standard conditions.

ELASTOSIL® E92 N Transparent is a transparent, self-leveling silicone rubber with very good mechanical properties that cures at room temperature under the influence of atmospheric moisture. This product provides excellent primer-less adhesion to many substrates and is used as a multipurpose glue and for textile coatings, e.g. antislip coatings.

ELASTOSIL® RT 708 is a self-leveling, slightly thixotropic, one-part silicone that cures with heat. It is designed for potting and coating applications and can also be used as a surface adhesive when applied in a thin layer, such as through silk-screen printing. Once cured, ELASTOSIL® RT 708 exhibits excellent adhesion to various substrates and offers long-term stability against weathering, moisture, and UV light. The cured silicone rubber can withstand continuously changing climatic conditions, UV radiation, and temperatures as high as 230 °C (446 °F) without sustaining any damage.

SEMICOSIL® 920 LT A/B is a pourable, addition-curing, two-part silicone rubber that cures to a soft silicone gel. It has a 1:1 mixing ratio and exhibits very low viscosity, making it easy to handle and process. This product offers fast curing and forms a soft gel during vulcanization. SEMICOSIL® 920 LT A/B maintains almost constant properties within a wide temperature range, from -100 °C to +200 °C. Additionally, it has a low ion content, ensuring high purity in applications.

ELASTOSIL® RT 705 is a self-leveling, slightly thixotropic, one-part silicone that cures with heat. It is primarily used for potting and coating applications but can also be used as a surface adhesive when applied in a thin layer, such as by silk-screen printing. Once cured, ELASTOSIL® RT 705 exhibits excellent adhesion to various substrates and demonstrates long-term stability against weathering, moisture, and UV light. The cured silicone rubber can withstand continuously changing climatic conditions, UV radiation, and temperatures as high as 230 °C (446 °F) without sustaining any damage.

DEHESIVE® 944 is a solvent-based, addition-crosslinkable silicone recommended for use as a release coating. It offers excellent release stability, medium release at low peel speeds, excellent bath life, and excellent anchorage to a wide variety of substrates. It can be used for coating polyester films (PET), papers, and PE-laminated papers.

ELASTOSIL® E11 Transparent is a flowable silicone rubber with very good mechanical properties that cures at room temperature under the influence of atmospheric moisture. Perfectly suited for lamination, coating, and thin-film potting, the material reliably fills small gaps and voids thanks to its self-leveling properties.

GENIOSIL® XL 70 is a clear, colorless liquid known as an alkoxyarylsilane. When exposed to moisture, it undergoes hydrolysis, leading to the formation of silanols and the release of methanol. These silanols can further react to form siloxanes. GENIOSIL® XL 70 finds applications in building & construction adhesives and flooring installation.