Products

ELASTOSIL® R Plus 4000/60 is a two-component, high consistency silicone rubber designed for the production of molded articles. Once cured, these articles exhibit exceptional tear resistance and high transparency. This fast-curing silicone rubber demonstrates impressive elongation values and maintains excellent tear resistance. The addition cure process enables a significantly faster vulcanization reaction compared to peroxide curing materials. Furthermore, no peroxide decomposition products are formed during vulcanization.

WACKER® AK 150 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 150,000 mm²/s. It is enriched with a special heat stabilizer that shields the silicone fluid from thermal decomposition and viscosity fluctuations. As a result, WACKER® AK 150 000 STAB is especially well-suited for applications involving high temperatures and/or shear stress. It is a non-polar liquid with a low solidification point and exhibits good dielectric properties.

ELASTOSIL® Color Paste FL Yellow RAL 1021 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

LIOSIL® TS 80 E is a specially developed macroemulsion of a functional silicone fluid designed as a softener for the tissue industry. It provides an excellent soft touch along with very good hydrophilicity. This product can be easily diluted with water and exhibits high substantivity on cellulose fibers.

ELASTOSIL® LR 3671/30 A/B is a self-adhesive liquid silicone rubber from the ELASTOSIL® 3671 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time and good mechanical and electrical properties. The vulcanizates of this product are known for their self-adhesive properties to various substrates as well as their low coefficient of friction.

ELASTOSIL® LR 3065/50 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3065 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. In comparison with ELASTOSIL® LR 3003 grades, the coefficient of friction is reduced by 50-70%. The vulcanizates are noted for their excellent mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.

WACKER® 50550/8 VP is a waxy, alkyl-modified polysiloxane known for its hydrolysis resistance and strong affinity to different substrates. Primarily utilized in the polish sector, this product is particularly recommended for car polishes and paint conditioners. Its high substantivity ensures that the treated paint surface remains highly resistant to detergents and weathering over extended periods of time, providing long-lasting protection.

Wacker Chemie 3-Chlorobutanone (3-Cl-MEK) is a chlorinated intermediate. It is a colorless to brownish, mobile liquid with a pungent odor. This compound serves as a building block for various heterocycles and is used in the synthesis of pharmaceuticals like sulfamoxole, sulfisoxazole, and sulfoguanole. Additionally, it finds application in the synthesis of pesticides.

ELASTOSIL® LR 3842/60 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily  pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

BELSIL® DM 1000000 is a linear, non-reactive, unmodified polydimethylsiloxane. It is a dimethicone with a high viscosity of 1000000 mm²/s. It exhibits low surface tension and a high spreading coefficient. Its flexible polymer backbone grants it high permeability to gasses such as water vapor and oxygen. This permeability enables the skin to respire.

ELASTOSIL® RT 563 is a pourable, room-temperature-vulcanizing, condensation-curing, two-component silicone rubber. It exhibits excellent flow and high hardness. This product is specifically designed for encapsulating electronic components. To initiate the curing process, Catalyst T37 can be added for longer pot lives and curing times, or Catalyst T40 for shorter pot lives and curing times.

ELASTOSIL® LR 3066/30 A/B is a liquid silicone rubber from the ELASTOSIL® LR 3066 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. When compared to the ELASTOSIL® LR 3003 grade, the coefficient of friction is reduced by 50-70%. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

VINNEX® 2522 is a solid, thermoplastic homopolymer that is transparent, colorless, and odorless. It is produced through the polymerization of vinyl acetate. This product is commonly used for modifying biopolymers and biopolymer compounds, as well as for blending with natural fibers or flours like wood, starch, and cork.

ELASTOSIL® AUX G 3243 is a solvent-based mixture of siloxanes and reactive silanes used as adhesion promoters for silicone rubbers. It is used to pretreat metallic, ceramic, glass, or other polymeric substrate surfaces to enable excellent adhesion towards subsequently vulcanized ELASTOSIL® R solid silicone elastomers (HCR/HTV, peroxide curing).

WACKER® L 066 is a 100% polysiloxane polyethylene glycol copolymer. WACKER® L 066 exhibits unique high surface activity, which allows it to wet and spread effectively on nearly any surface. WACKER® L 066 is primarily used for lowering the surface tension of aqueous and non-aqueous solutions, as a highly effective wetting agent, and for the hydrophilic treatment of numerous materials and surfaces.

ELASTOSIL® R 573/50 A/B is a two-component, electrically conductive HCR silicone rubber for the manufacture of electrically conductive products. This product is an addition-cured electrically conductive HCR silicone rubber that shows a low volume resistivity. This product can be used within a temperature range of -55 °C to +210 °C.

ELASTOSIL® Color Paste FL Light Blue RAL 5015 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

ELASTOSIL® LR 3844/50 A/B is an oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3843 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

WACKER® AK 300000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 300000 mm²/s. Its unique chemical structure imparts exceptional properties to WACKER® AK 300000, distinguishing it from organic materials like mineral oils. It exhibits excellent water-repellent properties and possesses good dielectric properties.

WACKER® AK 300 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 300000 mm²/s. It is formulated with a special heat stabilizer that provides protection against thermal decomposition and viscosity changes. This unique feature makes WACKER® AK 300 000 STAB highly suitable for applications subjected to high temperatures and/or shear stress. The heat stabilizer ensures the stability and integrity of the silicone fluid, allowing it to maintain its desired properties under challenging conditions.

VINNAPAS® B 100/20 VLE is an approximately 50% solution of a vinyl acetate/vinyl laurate copolymer in ethyl acetate. VINNAPAS® B 100/20 VLE can be diluted with esters, ketones, aromatic solvents, and chlorinated hydrocarbons. The solution's compatibility with alcohol is limited. VINNAPAS® B 100/20 VLE is not compatible with aliphatic compounds.

BELSIL® DM 1000 is a linear, non-reactive, unmodified polydimethylsiloxane. It is known for its low surface tension and high spreading coefficient. Dimethicones, like BELSIL® DM 1000, have a flexible polymer backbone that enables them to have high permeability to gasses such as water vapor and oxygen. This property allows the skin to breathe and maintain its natural respiration.

SILFOAM® SC 120 is an anhydrous antifoam compound known for its low viscosity, making it easier to handle compared to high-viscosity alternatives. It demonstrates exceptional resistance to alkaline environments, showcasing its versatility in various applications. The excellent alkali resistance of SILFOAM® SC 120 further enhances its suitability for a wide range of uses.

DEHESIVE® 920 is a solvent-free, addition-curing silicone fluid that forms an integral part of a multicomponent system. When combined with a crosslinker, platinum catalyst, and potentially a CRA® release modifier, it is employed to apply a release coating onto paper and filmic substrates.

SEMICOSIL® 920 LT A/B is a pourable, addition-curing, two-part silicone rubber that cures to a soft silicone gel. It has a 1:1 mixing ratio and exhibits very low viscosity, making it easy to handle and process. This product offers fast curing and forms a soft gel during vulcanization. SEMICOSIL® 920 LT A/B maintains almost constant properties within a wide temperature range, from -100 °C to +200 °C. Additionally, it has a low ion content, ensuring high purity in applications.

HDK® N20 P Pharma is a synthetic, hydrophilic, amorphous silica powder produced via flame hydrolysis. It is a white, high-purity colloidal powder. This product serves as a glidant for tableting, effectively improving the flow of powders. Furthermore, HDK® N20 P Pharma undergoes testing according to the EP and USP/NF standards.

ELASTOSIL® Color Paste PT Orange RAL 2004 is a ready-to-use masterbatch comprising specific pigments and reactive silicone polymers that are commonly used to produce ELASTOSIL® high-consistency silicone rubber. This ensures a homogeneous covulcanization of the color paste without significant impairment of the physical properties (e.g. hardness) and without migration, as may be observed for systems based on silicone oil.

ELASTOSIL® Color Paste PT Light Blue RAL 5015 is a ready-to-use compound comprising specific color pigments and a reactive silicone polymer, which is commonly used in ELASTOSIL® high-consistency silicone rubber. This ensures a homogeneous covulcanization of the color paste without interference of the physical properties (e.g. hardness) and without migration as observed with silicone oil.

LUMISIL® LR 7601/50 A/B is a liquid silicone rubber from the LUMISIL® LR 7601 series. It is a two-component compound with medium viscosity and fast curing times. The resulting vulcanizates exhibit exceptional optical transparency, along with excellent mechanical and electrical properties.

ELASTOSIL® LR 3846/30 A/B is a considerable oil-bleeding, liquid silicone rubber of the ELASTOSIL® LR 3846 series. It is a paste-like, readily pigmentable, two-component product with a short curing time. Shortly after the curing process, a slight, thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque, have good mechanical and electrical properties, and have very low compression sets.

DEHESIVE® SF 500 is a solvent-free, addition-curing silicone fluid. It is part of a multi-component system. Combined with a crosslinker, platinum catalyst, and others, it is used to apply a release coating on paper and filmic substrates. It is part of a release coating for paper and filmic pressure-sensitive laminates. Examples include uses for single- and double-sided industrial release laminates.

ELASTOSIL® E6 N CSC is a flowable one-part silicone rubber for potting or coating applications, and it is particularly suitable for the surface impregnation of porous natural materials. When exposed to air moisture, the product cures at room temperature to yield a permanently flexible silicone rubber with good mechanical and release properties. Fully vulcanized ELASTOSIL® E6 N CSC shows long-term stability against weathering, moisture, and UV radiation. The silicone elastomer may continuously be exposed to constantly changing climatic conditions, UV radiation, and temperatures as high as 180°C without damage.

ELASTOSIL® LR 3071/60 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3071 series. This product is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Its vulcanizates are noted for excellent mechanical and electrical properties.

WACKER® Finish CT 51 L is a solvent-based silicone rubber solution specifically designed for fine coatings on textile substrates. It enables the application of fine coatings with a weight as low as < 5 g/m². This product offers high water columns and low air permeability, resulting in excellent performance. Additionally, it exhibits exceptional layer-to-layer adhesion when multiple coating layers are applied.

VINNOL® H 40/43 is a copolymer composed of approximately 66 wt.% vinyl chloride (VC) and approximately 34 wt.% vinyl acetate (VAc). Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic binder undergoes physical drying, resulting in the formation of a film once the solvent in the formulation has evaporated.

ELASTOSIL® N189 Black is a non-slump, neutral-cure silicone sealant that cures at room temperature under the influence of atmospheric moisture. It exhibits excellent primerless adhesion to many substrates and has good resistance to mineral oil and coolants. Additionally, it shows excellent heat stability.