Products in Marine

SYNTHALAT A 151 is an acrylic resin cross-linked with polyisocyanate. Used in combination with aliphatic polyisocyanates for air- and stove-drying two-component coatings with high mechanical resistance and high resistance to chemicals and weathering. It has applications in automotive OEM coatings, industrial maintenance, marine coatings, metal coatings, industrial coatings, and marine transportation.

SYNTHALAT A-TS 3737 is a hydroxyfunctional acrylic resin. It is recommended to use it in combination with (cyclo-) aliphatic polyisocyanates for air- and forced-drying 2-pack coatings with high abrasion-, chemical-, and weather-resistance for general industrial coatings. It has applications in marine coatings, metal coatings, industrial maintenance, marine transpostation, and industrial coatings.

LIOPTAL TH 406 is a short-oil alkyd modified with phenolic resin. It is used as fast-drying anti-corrosion primers, synthetic resin-based paints, shop primers, knife fillers, oven-drying industrial products, and top coats. It has applications in metal coatings, primers and lacquers, marine transportation, industrial maintenance, and marine coatings.

LIOPTAL 541 is a short-oil alkyd resin modified with phenol resin. Due to its composition, LIOPTAL 541 is a special-purpose binder for air and stove drying primers with very short drying times and excellent overspray tolerance. It has applications in primers and lacquers, industrial coatings, industrial maintenance, marine coatings, and transportation.

SYNTHALAT TH 30 HS is a short-oil alkyd resin modified with phenolic resin. Air-drying and oven-drying primer coatings for industrial applications such as machinery and steel construction. The relatively low viscosity allows the preparation of primers and topcoat varnishes with significantly higher non-volatile content and good drying properties, also in thicker coating layers. It has applications in marine transportation, industrial maintenance, marine coatings, and wood flooring.

SYNTHALAT A 078 HV acrylic resin that cures with polyisocyanate. When combined with aliphatic polyisocyanates in 2-pack coatings that dry by air and oven, this results in industrial coatings with strong mechanical qualities as well as resistance to weathering and chemical assault. It can be used for industrial maintenance, automotive OEM coatings, marine transportation, marine coatings, industrial coatings, and metal coatings.

SYNTHALAT SR 46 is an air-drying medium-oil alkyd resin. This is recommended for high-quality, bloom-free topcoats in the agricultural machinery sector. It has applications in furniture, metal coatings, marine coatings, industrial maintenance, wood flooring, and other consumer applications.

SYNTHALAT A 597 is a thermoplastic acrylic resin. It gives good results as the sole binder for the manufacture of primers for problem substrates such as zinc. Unlike other physically dying binders, it does not require the addition of any plasticizers. It has applications in industrial maintenance, architectural coatings, primers and lacquers, and marine coatings.

SYNTHALAT A 150 is a polyisocyanate-curing acrylic resin. It is a 2-pack coating used where we require high-grade coating qualities. It is also used in combination with aliphatic polyisocyanates for industrial coatings. It has applications mainly in metal coatings, industrial maintenance, marine coatings, and also in off-road and recreational vehicle areas. 

DCL 7354 DPP Red, PR.254 is a yellow-shaded DPP that offers excellent opacity, high color saturation, weather resistance, heat stability, acid, alkali, and solvent resistance. It is recommended for high-end coatings and high-end plastics applications, and is FDA compliant for indirect food contact plastic applications.

DCL 7168 Anthanthrone Red, PR.168 is a high-performance, bright yellow-shade red pigment for use in high-end coating applications. It is most notably used in exterior architectural systems, as its superior weather fastness in light tones makes it ideal for such applications.

AFCONA 4050 is a high molecular weight polymeric dispersant for the deflocculation of all type of pigments. AFCONA 4050 is an effective polymeric dispersant used to stabilize inorganic and organic pigments, as well as carbon blacks. Steric hindrance gives it very good stability performance with all type of pigments.

Dar-Tech Portaryte® B45 is produced from carefully selected, very white, naturally occurring baryte. The standardized quality of Dar-Tech Portaryte® is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Fine grades of Dar-Tech Portaryte® fillers have been specially developed for powder coating applications. They are successfully used as an alternative for fine synthetic blanc fixe in high-gloss applications.

AFCONA 3239 is an additive designed as a slip and leveling agent that also offers defoaming. It is a very suitable leveling agent for epoxies, and will not stabilize foam, but instead act as an effective defoamer in such systems.

AFCONA 4080 is an effective polymeric dispersant used to stabilize inorganic and organic pigments, as well as carbon blacks. It has excellent stability performance due to steric hindrance, and is suitable for deflocculation of all types of pigments. It is a modified polyurethane polymer with a high molecular weight.

Dar-Tech Portaryte® B25 is produced from carefully selected, very white, naturally occurring baryte. The standardized quality of Dar-Tech Portaryte® is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Fine grades of Dar-Tech Portaryte® fillers have been specially developed for powder coating applications. They are successfully used as an alternative for fine synthetic blanc fixe in high-gloss applications.

AFCONA 3280 is a special modified polysiloxane that is soluble in aliphatic and aromatic hydrocarbons, esters and ketones, but insoluble in water. It offers slip, defoaming, and improvement of surface characteristics without hurting intercoat adhesion. Additionally, it offers better hot water resistance than other polyether modified polysiloxanes.

Dar-Tech Portaryte® B4 is produced from carefully selected, very white, naturally occurring baryte. The standardized quality of Dar-Tech Portaryte® is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Fine grades of Dar-Tech Portaryte® fillers have been specially developed for powder coating applications. They are successfully used as an alternative for fine synthetic blanc fixe in high-gloss applications.

AFCONA 5009 is an anionic/cationic wetting and dispersing additive that improves the wetting of pigment surfaces, reducing the interfacial tension between pigments or extenders and the vehicle. It is an economy grade of additive and stabilizes the pigments through electrical charge repulsion forces.

AFCONA 4017 is a polymeric dispersant mainly used for co-grinding. AFCONA 4017 is a polymeric dispersant mainly developed for co-grinding purposes for coil and can coating, heat cured polyester and acrylic, and epoxy, as well as polyurethane. This product does not depend on polarity and performs well in almost all resin systems, especially when co-grinding dark colors.

AFCONA 5008 is an anionic/cationic wetting and dispersing additive that improves the wetting of pigment surfaces and organically treated bentonites. It reduces the interfacial tension between pigments or extenders and the vehicle, and also stabilizes the pigments through charge repulsion forces.

AFCONA 3777 is an anti-crater, substrate wetting and leveling agent for solvent-based coatings. It is the 1st generation of fluorocarbon modified polyacrylic. Recommended as non-silicone leveling agent where silicone is not permitted due to intercoat adhesion problems. However, we highly recommend a combination with a suitable polysiloxane for better overall performance.

AFCONA 2020 is a very strong defoamer suitable for most solvent-based coatings, printing inks, and thermosetting resin systems. It eliminates foam and blistering, regardless of the source of the air bubbles. However, it is not suitable for transparent, high-gloss clear topcoats.

Dar-Tech Portaryte® B3 is produced from carefully selected, very white, naturally occurring baryte. The standardized quality of Dar-Tech Portaryte® is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Fine grades of Dar-Tech Portaryte® fillers have been specially developed for powder coating applications. They are successfully used as an alternative for fine synthetic blanc fixe in high-gloss applications.

AFCONA 2035 is a moderate defoamer that minimizes side effects, prevents the formation of foam and blisters during manufacturing and application, and offers good defoaming and compatibility with most resin systems. It is recommended for medium-viscosity applications applied by brush and conventional spray methods, and is suitable for systems ranging from low to high polarity.

AFCONA 3700 is a wetting, leveling and flow control agent for solvent-free and solvent-based coatings with excellent anti-crater properties. AFCONA 3700 is a highly fluorocarbon modified polyacrylic polymer. It has very low surface tension and therefore it can substitute and perform as silicones without the side effects of silicones.

AFCONA 3236 is an additive designed to provide slip and leveling, as well as good defoaming performance. It is an alkyl-modified polysiloxane that offers excellent slip and leveling properties. Unlike other organically modified polysiloxanes, AFCONA 3236 acts as a defoamer and does not stabilize foam in most systems, making it suitable for foam-sensitive applications such as floor coatings and high-build systems.

Dar-Tech Portaryte® C15 is a natural barium sulfate that comes without any residual salts when compared to precipitated grades. This product is closely monitored, and the particle size is kept within a narrow variation. In addition, this natural baryte is easier to disperse than precipitated grades.

Dar-Tech Portaryte® C30 is produced from carefully selected, very white, naturally occurring baryte. The standardized quality of Dar-Tech Portaryte® C is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Dar-Tech Portaryte® B5 is produced from carefully selected, very white, naturally occurring baryte. The standardized quality of Dar-Tech Portaryte® is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Fine grades of Dar-Tech Portaryte® fillers have been specially developed for powder coating applications. They are successfully used as an alternative for fine synthetic blanc fixe in high-gloss applications.

AFCONA 5207 is a very economical dispersant with good pigment stabilizing performance. It functions as a wetting and dispersing additive for solvent-based architectural and decorative paints, also a very suitable dispersant for printing ink. It will stabilize most of the pigments that are commonly used in these systems.

Dar-Tech Portaryte® B50/10 is produced from carefully selected, very white, naturally occurring baryte. The standardized quality of Dar-Tech Portaryte® is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Fine grades of Dar-Tech Portaryte® fillers have been specially developed for powder coating applications. They are successfully used as an alternative for fine synthetic blanc fixe in high-gloss applications.

AFCONA 4201 is a polyurethane dispersant that has been developed using an innovative concept, which is based on a newly developed intermediate monomer and anchoring groups. It has a high molecular weight and is capable of deflocculating all types of pigments. It is a modified polyurethane polymer.

AFCONA 2045 is a silicone-based defoamer used to prevent the formation of foam and blisters during manufacturing and application of solvent-based coatings, including polyurethane clear coats. It is effective even in difficult situations such as airless spray, brush, and roller application, and has strong defoaming properties with a very good transparent appearance.

AFCONA 5054 is a wetting and dispersing additive to prevent sedimentation and flooding of pigments. It helps to reduce interfacial tension between hydrophilic pigments/extenders and the binder, forming a lattice structure with the pigments at the same time. It stabilizes pigment through electrical charge repulsion forces.

AFCONA 4047 is a high molecular weight polymeric dispersant for the deflocculation of all types of pigments. AFCONA 4047 is a highly effective polymeric dispersant used to stabilize inorganic and organic pigments, as well as carbon blacks. Steric hindrance provides very good stability performance with all type of pigments.