Products in Devices & Assemblies: Good Weather Stability

SILRES® H62 C is a liquid, solvent-free, one-part heat-curing phenyl silicone resin formulation. The product is ideal for impregnating the electrical coils of motors and generators. Besides, SILRES® H62 C can be used to provide hydrophobic properties to porous materials and as a binder for composites made of fibrous fillers, cloths, and woven or non-woven reinforcing materials. The formulation is ready-to-use and crosslinks under heat. While curing, SILRES® H62 C does not release chemical byproducts, so curing shrinkage is barely noticeable. The product also thermosets in thick layers, even when in contact with air. Fully cured SILRES® H62 C has excellent electrical insulation properties and outstanding long-term heat resistance. Additionally, it shows high stability against weathering, moisture, and UV light and can therefore be continuously exposed to constantly changing climatic conditions or UV radiation.

SILRES® K is a solution of a condensation-curing methyl silicone resin in toluene. The product can be used as a binder or as an impregnation agent for porous materials. Besides, SILRES® K is the ideal product for making tack-free prepregs with excellent storage stability. Fully cured SILRES® K has a very low carbon content and thus yields a high ash content when pyrolized. Composites made of SILRES® K show long-term stability against weathering, moisture, and UV light. They can therefore be continuously exposed to constantly changing climatic conditions, UV radiation, and temperatures significantly higher than 300 °C (572 °F). SILRES® K also provides water repellency and excellent electrical insulation properties to the respective composite materials.

METABLEN™ S 2260 is a silicone-acrylic-based rubber core shell-type impact modifier that provides super high impact strength and weatherability to acrylonitrile butadiene styrene (ABS), acrylonitrile styrene acrylate (ASA) and poly methyl methacrylate (PMMA) through extrusion and moldings. It is used for esthetic exterior car components such as front grills, and housings for electronics.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ SRK-200A is a silicone-acrylic-based rubber impact modifier with heat-aging resistance and impact strength. It is used for polycarbonate/acrylonitrile butadiene styrene (PC/ABS) and polycarbonate/polybutylene terephthalate (PC/PBT) in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesChemical resistanceWeather stabilityHeat resistanceHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2100 is a silicone-acrylic-based rubber impact modifier with good colorability and impact strength. It is used for polycarbonates (PC) and polycarbonate blends, polyvinyl chloride, engineering plastics and polyolefins in a variety of automotive, aerospace, consumer goods, and electric and electronic applications. METABLEN™ S-2100 provides ductility on facial impact tests, even after immersion of coating chemicals. The effect is maintained at higher molding temperatures. BenefitsEasy to processFlame retardancy for engineering plastics and polyolefins elastomersFeaturesGood colorabilityWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2501 is a is silicone-acrylic-rubber-type impact modifier that adds hydrolysis resistance, heat-aging resistance and impact strength to polycarbonate (PC), polylactic acid (PLA) and alloy in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesGood impact strengthWeather stabilityHeat aging resistance*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UV-3300B is UV curable urethane acrylate oligomer with excellent soft-elasticity, and very high elongation. It also shows good mechanical properties even at low temperature. EB and Thermal cure systems are also applicable. Features Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Good mechanical properties at low temperature Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2130 is a silicone-acrylic-based rubber impact modifier optimized for flame retardant polycarbonate (PC) resins. It adds colorability, heat-aging resistance and impact strength to PC and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S X-005 is a silicone-acrylic rubber-type impact modifier that provides flame retardance, hydrolysis resistance and impact strength. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesFlame retardantWeather stabilityHydrolysis resistanceImpact resistance even at low temperaturesLow friction*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2030 is a silicone-acrylic-based rubber impact modifier with excellent weatherability and super high impact strength at room temperature and low temperatures. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesGood impact strengthWeather stabilityHeat aging resistanceHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ SX-006 is a silicone-acrylic rubber-type impact modifier that provides impact strength and weatherability while maintaining melt-flow ability and scratch resistance of PMMA and SAN. It also gives vivid molded-in colors like piano black. The compounded resins can be widely used in automotive exterior applications (e.g. front grill, pillar, door mirror housing). Features High impact strength in all temperature zones High modulus and excellent heat aging resistance Excellent colorability *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2200 is a silicone-acrylic-based rubber impact modifier with an epoxy-modified shell.Compatible with Polyethylene terephthalate (PET), polybutylene terephthalate (PBT), polyamide (PA) and alloy, it provides hydrolysis resistance, heat-aging resistance and impact strength for a wide range of automotive, aerospace and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

METABLEN™ W 450A is an acrylic rubber-type impact modifier with good weatherability and impact strength. It is used for polyvinyl chloride (PVC) in window frames, pipes and gutters.FeaturesHigh level of elasticity Good impact strengthMaintains weather stability*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UV-3520TH is an aliphatic urethane acrylate oligomer with soft elasticity, good toughness and high elongation. It shows unique mechanical properties with various reactive diluents. Features Soft-Elastic type, Good toughness, High elongation Diluted in Tetrahydrofurfuryl Acrylate (THFA) (oligomer/ THFA = 70/30 wt%) Non-solvent (100% hardening ingredient) Unique mechanical properties with various reactive diluents Applications UV/ EB/ Thermal-curable adhesive UV adhesive for electric device use 3D printer, and Inkjet *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2001 is a silicone-acrylic rubber-type impact modifier with high impact strength in all temperatures and excellent weatherability. It can be used with ABS, PC, PLA, and other matrix resins in a variety of automotive, aerospace and electric and electronic applications. Features Can be used with recycled plastics Good weather stability Low temperature impact resistance *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ W 600A is an acrylic rubber-type impact modifier with good weatherability and hydrolysis resistance. It is used for polylactic acid (PLA), polycarbonate/polybutylene terephthalate (PC/PBT) and polycarbonate/polyethylene terephthalate (PC/PBT) in 3D printer filaments and aerospace, consumer goods, and electric and electronic applications.FeaturesHigh level of hydrolysis resistance Good impact strengthMaintains weather stability*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SABIC's Specialties Business LNP THERMOCOMP WF0039U compound is based on Polybutylene Terephthalate (PBT) resin containing 15% glass fiber. Added features of this grade include: Flame Retardant and UV Stabilized. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LNP COLORCOMP E1000CE compound is based on unfilled Polyetherimide (PEI) resin. Added features of this grade include: Easy Molding, UV Stabilized, LNP Clean Compounding Technology.

LNP THERMOTUF V1000SU compound is based on unfilled Super Touch Nylon resin. Added features of this grade include: Impact Modified, Heat Stabilized, UV Stabilized.

SABIC's Specialties Business LNP THERMOCOMP PF006U compound is based on Nylon 6 resin containing 30% glass fiber. Added features of this grade include: UV Stabilized. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LNP ELCRES EXL9034 is based on Polycarbonate (PC) siloxane copolymer resin with excellent low temperature ductility, robust flame retardancy (V0/5VA), good processability and electrical tracking resistance. It is UV stabilized with F1 rating and is a good candidate for applications like photovoltaic connectors.

SABIC's Specialties Business LNP COLORCOMP R1000SU compound is based on Nylon 6/6 resin. Added features of this grade include: Heat Stabilized, UV Stabilized. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LNP™ THERMOTUF™ PF003IU compound is based on Nylon 6 resin containing 15% glass fiber. Added features of this grade include: Impact Modified and UV Stabilized.

LNP LUBRICOMP KL004U compound is based on Acetal (POM) Copolymer resin containing 20% PTFE. Added features of this grade include: Wear Resistant, UV Stabilized.

LNP THERMOCOMP MX06403 compound is based on Polypropylene (PP) resin containing 20% glass fiber. Added features of this grade include: Heat Stabilized, UV Stabilized.

SABIC's Specialties Business LNP ELCRIN 610001UXiQ compound is based on Polycarbonate / Polybutylene Terephthalate (PC/PBT) blend, utilizing ELCRIN iQ upcycling technology containing minimum 12% Post-Consumer Recycling (PCR) weight content. Added features of this grade include: Non-Chlorinated, Non-Brominated Flame Retardant, Good Flow, High Impact, Improved Chemical Resistance, UV Resistant.

SABIC's Specialties Business LNP ELCRES DMX1435D is a UV stabilized standard flow Polycarbonate (PC) copolymer resin with diffusion effect and improved scratch resistance. This grade is a good candidate for consumer electronics, mobility interiors and other adjacent applications, which need lower scratch and diffusive effects performance.

SABIC's Specialties Business LEXAN™ DMX1435 is a UV stabilized standard flow polycarbonate copolymer resin with improved scratch resistance, improved dielectric performance (lower Df). It is both transparency and colorable available solutions to the applications such as 5G related devices, anti-scratch covers, etc. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LNP THERMOCOMP 9X07430 compound is based on Polycarbonate / Polybutylene Terephthalate (PC/PBT) blend containing glass fiber and talc. Added features of this grade include: Opaque, Weatherable. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

LEXAN FXD123R is a transparent/translucent low viscosity grade for light diffusion special effects. UV-stabilized. Color package may affect performance.

SABIC's Specialties Business LEXAN BFL4000U Polycarbonate (PC) is an injection moldable non-chlorinated/brominated, unfilled, flame retardant grade with high flow. It is UV stabilized, light reflective and has an MVR of 22 (300°C/1.2kg) and a UL94 V0@1.5mm.

SABIC's Specialties Business FXE9330 PC-Siloxane copolymer is a special effects fluorescent with excellent processability and low temperature impact performance. Non-chlorinated, non-brominated flame retardant product in most colors. UV-stabilized. UL rated f1/V-0/5VA.

SABIC's Specialties Business CYCOLOY CX7240U Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) blend is an injection moldable, medium flow, non chlorinated/brominated UV stabilized flame retardant grade. It has a UL94 V0@.75mm, 5VA@3.0mm and 5VB@1.5mm flame rating. This grade has improved chemical resistance compared to standard PC/ABS blends and is a good candidate for thin wall applications.

SABIC's Specialties Business LNP ELCRIN 610009UXiQ compound is based on Polycarbonate / Polybutylene Terephthalate (PC/PBT) blend, utilizing ELCRIN iQ upcycling technology containing minimum 19% Post-Consumer Recycling (PCR) weight content. Added features of this grade include: Flame Retardant, UL746C F1 Rating, UL94 V0 and 5VA Flame Rating, UV Resistant, Impact Modified, Excellent Chemical Resistance. This is a good candidate for applications in the electrical industry including bobbins, switches, and enclosures.

SABIC's Specialties Business Improved flow PC with excellent processability and mold release. UV stabilized. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LEXAN FXEMPX1 polycarbonate (PC) siloxane copolymer resin is a UV stabilized injection molding (IM) grade with release properties. This resin offers good low temperature ductility in combination with high flow characteristics and excellent processability with opportunities for shorter IM cycle times compared to standard IM PC resins. LEXAN FXEMPX1 resin is a general purpose product available in limited colors and may be an excellent candidate for a broad range of applications.