Products in Electrical & Electronics

ELASTOSIL® RT 773 is a non-slump, condensation-curing RTV-2 silicone. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 773 offers excellent long-term stability against weathering, moisture, and UV light. The compressible silicone elastomer can continuously endure changing climatic conditions, UV radiation, and temperatures as high as 140°C (284°F) without damage.

ELASTOSIL® AUX G 800 is a solution of reactive siloxanes and silanes in an organic solvent. The primer composition can be applied to the substrate as-is or diluted. During evaporation of the solvent and on exposure to atmospheric humidity at ambient temperature, a rigid primer film is formed that firmly adheres to the substrate. Application of silicone rubber onto the primed substrate and subsequent vulcanization will then result in a tight bond between the silicone rubber and the substrate.

LUMISIL® LR 7601/60 A/B is a liquid silicone rubber from the LUMISIL® LR 7601 series. It is a two-component compound with medium viscosity and fast curing times. The resulting vulcanizates exhibit exceptional optical transparency, along with excellent mechanical and electrical properties.

ELASTOSIL® E11 Transparent is a flowable silicone rubber with very good mechanical properties that cures at room temperature under the influence of atmospheric moisture. Perfectly suited for lamination, coating, and thin-film potting, the material reliably fills small gaps and voids thanks to its self-leveling properties.

POWERSIL® 466 LV A/B is a ready-to-use, two-component system of liquid silicone rubber. It offers medium conductivity and exhibits excellent mechanical properties. The material has high elongation at break and low tension set, providing flexibility and resilience. Additionally, it maintains stable electrical properties, making it suitable for various applications.

ELASTOSIL® LR 3003/60 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

LUMISIL® LR 7601/70 A/B is a liquid silicone rubber belonging to the LUMISIL® LR 7601 series. It is a two-component compound with medium viscosity and fast curing times. The vulcanizates produced from this material are characterized by their remarkable optical transparency, as well as their exceptional mechanical and electrical properties.

SEMICOSIL® 920 LT A/B is a pourable, addition-curing, two-part silicone rubber that cures to a soft silicone gel. It has a 1:1 mixing ratio and exhibits very low viscosity, making it easy to handle and process. This product offers fast curing and forms a soft gel during vulcanization. SEMICOSIL® 920 LT A/B maintains almost constant properties within a wide temperature range, from -100 °C to +200 °C. Additionally, it has a low ion content, ensuring high purity in applications.

HDK® H15 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H15 is commonly utilized as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics, and other applications. Additionally, it serves as a reinforcing filler in elastomers, particularly silicone elastomers. Moreover, HDK® H15 functions as a free flow additive in the production of technical powders.

WACKER® APF 130 is a clear, colorless, and odorless polydimethylsiloxane with a high proportion of phenyl groups. This versatile fluid finds widespread application as a heat transfer fluid and a pressure transfer fluid. It also demonstrates excellent performance as a dielectric in capacitors and transformers and serves as a reliable base fluid in heat-resistant lubricants.

ELASTOSIL® E92 N Transparent is a transparent, self-leveling silicone rubber with very good mechanical properties that cures at room temperature under the influence of atmospheric moisture. This product provides excellent primer-less adhesion to many substrates and is used as a multipurpose glue and for textile coatings, e.g. antislip coatings.

DEHESIVE® SF 201 AMA® is a solvent-free, addition-curing silicone fluid. It is designed for release applications and is applied with additional components on paper and filmic substrates. The fast cure properties of DEHESIVE® SF 201 AMA® allow for use with temperature-sensitive substrates or comparatively low platinum levels at standard conditions.

POWERSIL® 600 A/B is a pourable, addition-curing, two-component silicone rubber that cures at room temperature. It is specifically designed for casting applications and forms soft products with high mechanical strength. This ready-to-use, two-component system is very easy to process thanks to its low viscosity. It offers excellent dielectric properties and is best suited for outdoor applications due to its UV and weathering resistance, as well as its excellent hydrophobic properties.

ELASTOSIL® SOLAR 3210 A/B is a pourable addition-curing RTV-2 silicone rubber specifically designed for coating, lamination, encapsulation, and molding applications. This product undergoes vulcanization at both room temperature and under heat, resulting in a transparent silicone rubber with excellent transmission properties and a moderate hardness. Cured ELASTOSIL® SOLAR 3210 A/B exhibits exceptional long-term stability against weathering, moisture, and UV light. It can withstand constantly changing climatic conditions, UV radiation, and temperatures up to 180 °C (356 °F) without any damage to the silicone elastomer.

ELASTOSIL® R Plus 4305/70 is a two-component, high-consistency silicone rubber specifically developed for the manufacture of extruded articles. Cured articles made from this addition-curing rubber exhibit excellent transparency and demonstrate good to very good mechanical properties. This fast-curing silicone rubber displays good to very good mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-curing materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.

ELASTOSIL® RT 771 is a self-leveling, condensation-curing RTV-2 silicone adhesive. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 771 offers excellent long-term stability against weathering, moisture, and UV light. The silicone elastomer can continuously withstand changing climatic conditions, UV radiation, and temperatures up to 180°C (356°F) without damage.

POWERSIL® 3100 MH silicone rubber is a one-component, addition-curing compound that is ready to use and cures to an electrically insulating, highly erosion-resistant silicone elastomer. This product offers comparatively fast curing times compared to conventional silicone rubber, reducing cure times by 30-50%, depending on the wall thickness of the application, as well as the available machinery and runner system. Furthermore, no peroxide decomposition products are released during the curing process, reducing any potential hazards. The curing system also eliminates the risk of curing inhibition by oxygen.

ELASTOSIL® RT 675 A/B is a pourable, addition-curing RTV-2 silicone rubber with a two-part formulation and a 1:1 mixing ratio. It features a very high hardness (Shore A) and excellent heat stability. This silicone rubber is particularly known for its high thermal conductivity, making it ideal for the encapsulation of electronic components.

WACKER® AP 1000 STAB is a clear, brown-colored polydimethylsiloxane with a high proportion of phenyl groups. This specially stabilized product exhibits excellent thermal stability. It is primarily used as a heat transfer fluid and a pressure transfer fluid. For practical purposes, the useful temperature range of WACKER® AP 1000 STAB is between -35 °C and +250 °C. However, this presupposes that heat-stressing of the fluid occurs under "chemically pure" conditions.

POWERSIL® 577 Plus is a curable, one-component silicon-in-water emulsion that can be applied through spray application. Upon drying and curing, it forms a high voltage insulator coating with excellent electrical properties. This solvent-free product also creates a long-term hydrophobic surface, preventing the formation of wet conductive layers, minimizing electrical leakage current, and eliminating the risk of pollution flashovers.

ELASTOSIL® E43 Transparent is a self-leveling, one-component acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent mechanical properties and has good adhesion properties to many substrates. In particular, it is used as adhesive on cured silicone rubber.

ELASTOSIL® A33 Ivory is a moisture-curing silicone rubber (RTV-1) that does not slump and cures at room temperature. It releases an organic amine during the vulcanization process. ELASTOSIL® A33 demonstrates excellent primerless adhesion to a wide range of substrates. This multipurpose grade is suitable for sealing and bonding applications, offering resistance to high temperatures and contact with oil.

ELASTOSIL® SOLAR 2202 A/B is a pourable, addition-curing, RTV-2 silicone rubber used for potting, lamination, and encapsulation purposes. The product vulcanizes at room temperature to yield a very soft silicone gel. Cured ELASTOSIL® SOLAR 2202 A/B demonstrates pronounced inherent tack and excellent long-term stability against weathering, moisture, and sunlight. The soft silicone gel can continuously be exposed to constantly changing climatic conditions, UV radiation, and temperatures as high as 160°C (320°F) without damage.

GENIOSIL® GF 56 is an alkoxyvinylsilane. It is a clear, colorless liquid with a distinctive aromatic odor. In the presence of moisture, it undergoes hydrolysis (releasing ethanol) to form silanols, which can further react with each other to generate siloxanes. Acting as a bifunctional molecule, GENIOSIL® GF 56 serves as a molecular bridge between organic and inorganic substrates.

ELASTOSIL® RT 707 W is a flowable, one-part, heat-curing silicone used for potting and coating applications. The cured material demonstrates very good adhesion to many substrates and long-term stability against weathering, moisture, and UV light. The cured silicone rubber can continuously withstand constantly changing climatic conditions, UV radiation, and temperatures as high as 230°C (446°F) without sustaining damage.

POWERSIL® 735 Light Gray A/B is a two-component compound with low viscosity, offering excellent processing properties. The resulting vulcanizates exhibit remarkable resistance to tracking and erosion, along with favorable mechanical properties such as high tear strength. Additionally, they demonstrate excellent dielectric behavior, making it a reliable choice for various applications.

GENIOSIL® XL 70 is a clear, colorless liquid known as an alkoxyarylsilane. When exposed to moisture, it undergoes hydrolysis, leading to the formation of silanols and the release of methanol. These silanols can further react to form siloxanes. GENIOSIL® XL 70 finds applications in building & construction adhesives and flooring installation.

WACKER® Silicone Paste P 300 is an opaque paste with a medium to soft consistency and slight thixotropic properties. It possesses good electrical properties, including insulation, relative permittivity, and electric strength. Additionally, it exhibits strong adhesion to metals and ceramic materials. When applied as a coating, WACKER® Silicone Paste P 300 provides excellent water repellency, offering a certain level of protection against corrosion. The paste's low viscosity makes it easy to use as an embedding compound, release agent, or lubricant in various applications.

SEMICOSIL® 987 GR is a one-part, ready-to-use, thermally curable silicone elastomer that exhibits non-slump properties. It is primarily used as a sealing adhesive. The silicone is thixotropic in nature, allowing for easy application and shaping. It offers high flexibility, making it suitable for low-stress adhesive bonding, such as in molded-in-place gasket (FIPG) applications. Additionally, SEMICOSIL® 987 GR provides primerless adhesion to a wide range of substrates.

ELASTOSIL® E209 is a one-component silicone rubber with low viscosity that cures at room temperature under the influence of atmospheric humidity. It has a flowable consistency and utilizes an acetoxy-cure mechanism. ELASTOSIL E209 demonstrates good primerless adhesion to a variety of substrates. For optimal results in specific applications, it is recommended to conduct preliminary tests to optimize the conditions.

POWERSIL® 440 MH is a ready-to-use electrically conductive silicone rubber grade suitable for all types of molding applications. It is specifically designed for field grading in cable accessories and other electrically conductive parts. This material provides excellent conductivity and is ideal for applications requiring electrical conductivity.

ELASTOSIL® LR 3844/30 A/B is an oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3843 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

SEMICOSIL® 986/1K is a thermally curable, one-part silicone rubber known for its non-slump properties. It is a ready-to-use system, requiring no additional mixing. The silicone rubber is thixotropic in nature and exhibits a translucent appearance. SEMICOSIL® 986/1K possesses medium hardness and high flexibility, making it suitable as a low-stress adhesive. It offers primerless adhesion to various substrates. Furthermore, this silicone rubber undergoes rapid heat curing and features ultraviolet fluorescence properties.

WACKER® AP 1000 is a clear, colorless, and odorless polydimethylsiloxane with a high proportion of phenyl groups. It finds application as a heat transfer fluid, a pressure transfer fluid, a dielectric in capacitors and transformers, and as the base fluid for heat-resistant lubricants.

ELASTOSIL® N 2076 is a flowable, one-part silicone rubber for coating and encapsulation applications. When exposed to air moisture, it cures at room temperature to yield a permanently flexible silicone rubber with good heat resistance and excellent flame retardant properties. Fully vulcanized ELASTOSIL® N 2076 shows long-term stability against weathering, moisture, and UV radiation. The silicone elastomer may continuously be exposed to constantly changing climatic conditions, UV radiation, and temperatures as high as 180°C (356°F) without damage.

ELASTOSIL® LR 3842/60 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily  pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.