Products in Elastomers: Injection Blow Molding

MultiTech MultiFunctional U is our recycling additive for polyolefins MultiTech MultiFunctional U recycling additives improve the polyolefin recycling processes and help recyclers to produce higher value polyolefine recyclates for long term applications. For the first time the new repairing technology allows to repair damages from prior use. MultiTech MultiFunctional U for Upcycling of post-industrial and post-consumer polypropylene waste streams: Repair of damage in the polymer chains by novel chemical system. High quality recyclates for demanding long term applications Prolonged retention of mechanical properties during long term heat aging. One-Pack solution stabilizes the recycling process

MultiTech MultiFunctional T is a recycling additive for polyolefines. It is used for upcycling Polypropylene from car battery cases: Repair of damage in the polymer chains by a novel chemical system. High-quality recyclates for demanding long-term applications Prolonged retention of mechanical properties during long-term heat aging. Neutralization of acidic contaminations. One-Pack solution stabilizes the recycling process. MultiTech MultiFunctional T recycling additives improve the polyolefin recycling processes and help recyclers to produce higher-value polyolefine recyclates for long-term applications. For the first time, the new repairing technology allows repairing damages from prior use.

MOCOM Compounds ALFATER® XL D40E 2GP0000 is a thermoplastic vulcanisate (PP+EPDM) with a black or natural color. It has high viscosity and good resistance to weathering, chemicals, ozone, hot air, and hydrolysis. It is suitable for use in the automotive, building and construction, machinery, electrical and electronic, and furniture industries for extruded parts, blow molded parts, coextrusion, profiles, seals, sealing lip, conduit, tubes, cable guides, cable jacketing, bellows, and air duct. Additionally, it has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALFATER® XL A65I 2GP0000 is a thermoplastic vulcanisate (PP+EPDM) polymer suitable for injection molding. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. Its market segment includes automotive, building and construction, electrical and electronic, machinery, and furniture, and its applications include injection molded parts, seals, sealing lip, handles, soft touch elements, impact protection/shock absorber, protection caps, cable ducts, casters, plugs, fastener & connector, and 2K components.

MOCOM Compounds ALFATER® XL D40I 2GP0000 is a black thermoplastic vulcanisate (PP+EPDM) with good recovery, weathering resistance, chemical resistance, ozone resistance, and hot air resistance. It is suitable for injection molding and extrusion processes, with melt temperatures of 190-230°C and 200-240°C respectively, and mold temperatures of 10-70°C. Additionally, it has good adhesion to Polypropylene Homopolymer, Polypropylene Copolymer, polyethylene, Thermoplastic Vulcanisate (PP+EPDM), Thermoplastic Olefin Elastomer, and Thermoplastic Elastomer general. It is mainly used in the automotive, building and construction, electrical and electronic, machinery, and furniture industries, and is typically applied to seals, sealing lips, handles, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, profiles, cable jacketing, conduits, and 2K components.

MOCOM Compounds ALFATER® XL A50I 2GP0000 is a thermoplastic vulcanisate (PP+EPDM) with natural color and black color that is used for injection molded parts. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance and hydrolysis resistance. The black color meets the requirements for weathering dry, hot (Kalahari, PV3929) and weathering moist, hot (Florida, PV3930). ALFATER® XL A50I 2GP0000 is used in the market segments of automotive, building and construction, electrical and electronic, machinery, and furniture and its application areas are injection molded parts. Typical applications are seals, sealing lip, handles, soft touch elements, impact protection/shock absorber, protection caps, cable ducts, plugs, fastener & connector, and 2K components. It has adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer and thermoplastic elastomer general. It is widely used across industry applications and provides a great combination of properties.

MOCOM Compounds ALFATER® XL A85I 2GP0050 is a black thermoplastic vulcanisate (PP+EPDM) with good recovery, good weathering resistance, good chemical resistance, good ozone resistance, and good hot air resistance. It is suitable for injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/ shock absorbers, protection caps, cable ducts, plugs, fasteners & connectors, 2K components, and casters. It has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general. It is ideal for use in the automotive, building and construction, electrical and electronic, machinery, and furniture industries.

MOCOM Compounds ALFATER® XL A55I 2GP0050 is a black thermoplastic vulcanisate (PP+EPDM) suitable for pre-drying conditions in a dry air (dessiccant) dryer with temperatures of 70-80°C for 2-4 hours with a maximum moisture content of <0.10%. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is used mainly in the injection molding process with melt temperatures of 195-230°C, mold temperatures of 10-60°C, high injection speed, and back pressure (hydraulic) >5 bar and holding pressure 50-70% of injection pressure. It is used in automotive, building and construction, electrical and electronic, machinery, and furniture applications for injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, plugs, fasteners, and connectors, 2K components.

MOCOM Compounds ALFATER® XL A75I 2GP0000 is a black thermoplastic vulcanisate (PP+EPDM) material suitable for injection molding. It is suitable for use in the automotive, building and construction, electrical and electronic, machinery, and furniture industries, and can be used for injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, and 2K components. It has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALFATER® XL D50E 2GP0000 is a thermoplastic vulcanisate (PP+EPDM) with a black color, high viscosity, and excellent weathering, chemical, ozone, and hot air resistance. It is suitable for pre-drying in a dry air (dessiccant) dryer at 70-80°C for 2-4 hours. It is recommended for use in automotive, building and construction, machinery, electrical and electronic, and furniture applications, and is suitable for extruded parts, blow molded parts, and coextrusion. Typical applications include profiles, seals, sealing lips, conduit, tubes, cable guides, cable jacketing, bellows, air ducts, and 2K components. It can adhere to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALFATER® XL A60E 2GP0000 is a black thermoplastic vulcanisate (PP+EPDM) with high viscosity, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is suitable for use in automotive, building and construction, machinery, electrical and electronic, and furniture applications, such as for extruded parts, blow molded parts, coextrusion, profiles, seals, sealing lip, conduit, tubes, cable guides, cable jacketing, bellows, and air ducts. It also has adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general. All of these properties make it a versatile material for various applications.

MOCOM Compounds ALFATER® XL A85E 2GP0000 is a Thermoplastic Vulcanisate (PP+EPDM) with natural color, black color, and high viscosity. It has good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is used in the Automotive, building and construction, Machinery, electrical and electronic, and Furniture industries for extruded parts, blow molded parts, and coextrusion. It can be used for profile, seals, sealing lip, conduit, tubes, cable guides, cable jacketing, bellows, and air duct, as well as 2K components. Its adhesion to Polypropylene Homopolymer, Polypropylene Copolymer, polyethylene, Thermoplastic Vulcanisate (PP+EPDM), Thermoplastic Olefin Elastomer, and Thermoplastic Elastomer has been tested generally.

MOCOM Compounds ALFATER® XL A90E 2GP0000 is a black thermoplastic vulcanisate (PP+EPDM) that provides good weathering, chemical, ozone, and hot air resistance. It is suitable for extruded parts, blow molded parts, coextrusion, profiles, seals, sealing lips, conduits, tubes, cable guides, cable jacketing, bellows, air ducts, and 2K components, and can be used in the automotive, building and construction, machinery, electrical and electronic, and furniture industries. It has adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALFATER® XL A75I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) polymer used in a variety of markets such as automotive, building and construction, electrical and electronic, machinery, and furniture. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is typically used for injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, and 2K components.

MOCOM Compounds ALFATER® XL D40I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) that is used in injection molding and is available in natural color and black. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for automotive, building and construction, electrical and electronic, machinery and furniture applications, and can be used for seals, sealing lips, handles, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners, and connectors, and 2K components. It can adhere to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALFATER® XL A80E 2GP0000 is a thermoplastic vulcanisate (PP+EPDM) with a black color and high viscosity. It features good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is suitable for use in the automotive, building and construction, machinery, electrical and electronic, and furniture sectors and can be used for extruded parts, blow molded parts, coextrusion, profile, seals, sealing lip, conduit, tubes, cable guides, cable jacketing, bellows, and air ducts. Additionally, it has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALFATER® XL A40I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) polymer with natural color and black options. It has good recovery, weathering, chemical, ozone, hot air, and hydrolysis resistant properties. It is best suited for injection molded parts, seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, plugs, fasteners & connectors, and 2K components. Additionally, it has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer.

MOCOM Compounds ALFATER® XL ECO D40 2GP0000 is a thermoplastic vulcanisate polymer (PP+EPDM) in black color with polymer recyclate special features, suitable for automotive, building and construction, electrical and electronic, machinery, and furniture applications. Pre-drying conditions should be in a dry air (dessiccant) dryer at 70-80°C for 2-4 hours, with a maximum moisture content of <0.10%. Processing extrusion requires a melt temperature of 190-230°C and an indie temperature of 190-220°C.

MOCOM Compounds ALFATER® XL A55I 2GP0000 is a thermoplastic vulcanisate (PP+EPDM) with a natural color, designed for injection molding. It has excellent recovery, weather resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for use in automotive, building and construction, electrical and electronic, machinery, furniture and injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/ shock absorbers, protection caps, cable ducts, plugs, fasteners & connectors, and 2K components. Furthermore, it is also capable of adhering to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALFATER® XL A90I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) that is used for injection molding. It has excellent recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for automotive, building and construction, electrical and electronic, machinery, and furniture applications for injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorber, protection caps, cable ducts, casters, plugs, fastener & connector, and 2K components. It has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALFATER® XL A65E 2GP0000 WT1159-17 is a thermoplastic vulcanisate (PP+EPDM) available in natural, white, and black colors. It has high viscosity and superior resistance to weathering, chemicals, ozone, hot air, and hydrolysis. This material is widely used in the automotive, building and construction, machinery, electrical and electronic, and furniture industries for applications such as profiles, seals, sealing lips, conduits, tubes, cable guides, cable jacketing, bellows, and air ducts, as well as 2K components. It offers excellent adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALFATER® XL A60I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) base polymer that is used for injection molding applications. It is available in natural color or black and has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for automotive, building and construction, electrical and electronic, machinery, and furniture applications. Typical applications include seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners and connectors, and 2K components. It also has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALFATER® XL D50I 2GP0050 is a black thermoplastic vulcanisate (PP+EPDM) with excellent recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for use in automotive, building and construction, electrical and electronic, machinery, and furniture applications, and is used for injection molded parts such as seals, sealing lips, handles, impact protectors/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, and 2K components. It also has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALFATER® XL A90I 2GP0001 is a polymeric material that is processed with injection molding. It is a thermoplastic vulcanisate (PP+EPDM) with a natural color or gray, and features good recovery, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is suitable for automotive, building and construction, electrical and electronic, machinery, and furniture applications, and is used for injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fastener & connectors, and 2K components.

MOCOM Compounds ALFATER® XL A35I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) polymer with a natural color and is best suited for injection molding. It is used for applications such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, plugs, fasteners & connectors, and 2K components. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance, making it suitable for use in a variety of industries including automotive, building and construction, electrical and electronic, machinery, furniture, and other industries.

MOCOM Compounds ALFATER® XL A65E 2GP0000 is a Thermoplastic Vulcanisate (PP+EPDM) with a natural color, white, or black. It has high viscosity and good weathering, chemical, ozone, hot air, and hydrolysis resistance. It is suitable for use in the automotive, building and construction, machinery, electrical and electronic, and furniture market segments for extruded parts, blow molded parts, coextrusion profiles, seals, sealing lips, conduits, tubes, cable guides, cable jacketing, bellows, air ducts, and 2K components.

MOCOM Compounds ALFATER® XL A70I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) with natural color, black and has good recovery, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is suitable for injection molding with a melt temperature of 195-230°C and a mold temperature of 10-60°C, making it suitable for a wide range of applications, such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, and 2K components. It can adhere to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALFATER® XL ECO D50I 2GP0000 is a black thermoplastic vulcanisate (PP+EPDM) polymer recyclate with good weathering, chemical, ozone, hot air, and hydrolysis resistance. It is used for injection molded and blow molded parts such as seals, sealing lips, handles, racking/shelving, impact protection/shock absorber, protection caps, cable ducts, bellows, and 2K components. It has adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic olefin elastomer, and thermoplastic elastomer general and is used in the automotive, building and construction, electrical and electronic, machinery, and furniture markets.

MOCOM Compounds ALFATER® XL A65I 2GP0050 is a black thermoplastic vulcanisate (PP+EPDM) with good recovery, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is suitable for use in injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, and 2K components. It can be adhered to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general. It has excellent durability and performance.

MOCOM Compounds ALFATER® XL A80I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) polymer with natural color or black color, designed for injection molding applications. It has excellent recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance, making it suitable for automotive, building and construction, electrical and electronic, machinery, furniture, and injection molded parts, such as seals, sealing lip, handles, soft touch elements, impact protection/shock absorber, protection caps, cable ducts, casters, plugs, fastener & connectors, and 2K components.

BRUGGOLEN® TP-R2090 is our recycling additive for polyolefins Bruggolen® R recycling additives improve the polyolefin recycling processes and help recyclers to produce higher value polyolefine recyclates for long term applications. For the first time the new repairing technology allows to repair damages from prior use. BRUGGOLEN® TP-R2090 for Upcycling of post-industrial and post-consumer polypropylene waste streams: Repair of damage in the polymer chains by novel chemical system. High quality recyclates for demanding long term applications Prolonged retention of mechanical properties during long term heat aging. One-Pack solution stabilizes the recycling process

BRUGGOLEN® Recycling R8895 is a recycling additive for polyolefines. It is used for upcycling Polypropylene from car battery cases: Repair of damage in the polymer chains by a novel chemical system. High-quality recyclates for demanding long-term applications Prolonged retention of mechanical properties during long-term heat aging. Neutralization of acidic contaminations. One-Pack solution stabilizes the recycling process. Bruggolen® R recycling additives improve the polyolefin recycling processes and help recyclers to produce higher-value polyolefine recyclates for long-term applications. For the first time, the new repairing technology allows repairing damages from prior use.

Topolymer® 9210-851NA/BL is a heat-stabilized PP/EPDM based Thermoplastic Vulcanizate (TPV) in the family of Thermoplastic Elastomer (TPE). This material is designed for a wide range of applications such as automotive interiors and exteriors, construction seals, gaskets, electricals, consumer products or other parts where softness and conformity are needed. This grade can be processed on conventional thermoplastics processing equipments for Injection Molding, Extrusion and Blow Molding or other hot melt processes. It is completely recyclable.

Purgex™ 459 Plus commercial purging compound is a ready-to-use blend consisting of active ingredients with a polyethylene carrier. Purgex products have mechanical activity for efficient cleaning, foaming action for enhanced mixing and a lubricant for easy removal. Purgex 459 is an ideal purging compound for tough resins.

Topolymer® 9210-651NA/BL is a heat-stabilized PP/EPDM based Thermoplastic Vulcanizate (TPV) in the family of Thermoplastic Elastomer (TPE). This material is designed for a wide range of applications such as automotive interiors and exteriors, construction seals, gaskets, electricals, consumer products or other parts where softness and conformity are needed. This grade can be processed on conventional thermoplastics processing equipments for Injection Molding, Extrusion and Blow Molding or other hot melt processes. It is completely recyclable.

Topolymer® 9210-801NA/BL is a heat-stabilized PP/EPDM based Thermoplastic Vulcanizate (TPV) in the family of Thermoplastic Elastomer (TPE). This material is designed for a wide range of applications such as automotive interiors and exteriors, construction seals, gaskets, electricals, consumer products or other parts where softness and conformity are needed. This grade can be processed on conventional thermoplastics processing equipments for Injection Molding, Extrusion and Blow Molding or other hot melt processes. It is completely recyclable.