Knowde Enhanced TDS
Identification & Functionality
- Polymer Name
- Technologies
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Electrical Properties
- Flammability
- Processing Information (Injection Molding)
- Rheological Properties
Value | Units | Test Method / Conditions | |
Tensile Strength (Type 2) | 14.9 | MPa | ISO 37 |
Tear Strength (Method Ba) | 93.0 | kN/m | ISO 34-1 |
Elongation at Break (Type 2) | 500.0 | % | ISO 37 |
Shore Hardness D (15s) | 50.0 | — | ISO 868 |
Tensile Stress at 100% Elongation (Type 2) | 12.7 | MPa | ISO 37 |
Value | Units | Test Method / Conditions | |
Density | 990.0 | kg/m³ | ISO 1183 |
Value | Units | Test Method / Conditions | |
Compression Set (22h, at 70°C, 25%, Type A) | 80.0 | % | ISO 815 |
Compression Set (22h, at 100°C, 25%, Type A) | 87.0 | % | ISO 815 |
Compression Set (72h, at 22°C, 25%, Type A) | 70.0 | % | ISO 815 |
Compression Set (72h, at 125°C, 25%, Type A) | 98.0 | % | ISO 815 |
Value | Units | Test Method / Conditions | |
Service Temperature (depending on load, geometry, etc.) | - 40 to 125 | °C | — |
Moisture Content | max. 0.1 | % | — |
Value | Units | Test Method / Conditions | |
Tracking Resistance (CTI) | 600.0 | — | IEC 60112 |
Value | Units | Test Method / Conditions | |
Flammability (1.5 mm) | HB | class | UL 94 |
Flammability (3.0 mm) | HB | class | UL 94 |
Glow Wire (GWFI, 750°C, 2mm) | Passed | — | DIN EN 60695 |
Fire Behavior FMVSS (2.0 mm) | Passed | — | FMVSS 302/DIN 75200 |
Value | Units | Test Method / Conditions | |
Back Pressure (hydraulic) | min. 4 | bar | — |
Mould Temperature | 10 - 70 | °C | — |
Press Blow Molding Melt Temperature | 190 - 210 | °C | — |
Melt Temperature | 195 - 240 | °C | — |
Holding Pressure (of injection pressure) | 50 - 70 | % | — |
Injection Speed | High | — | — |
Value | Units | Test Method / Conditions | |
Shrinkage (Lengthwise, 24h) | 1.8 - 2.2 | % | ISO 294-4 |
Shrinkage (Lateral, 24h) | 1.3 - 1.7 | % | ISO 294-4 |
Spiral Flow (2 mm wall thickness) | 35.0 | cm | — |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
In a dry air (dessiccant) dryer 70-80 °C for 2-4 h
Storage & Handling
- Storage Conditions
Store in dry, protected from light tightly sealed.