Products in Additives

NINOL® 40CO-E is a cochin oil-based dea amide providing viscosity building with foam boosting and stabilization. This liquid nonionic surfactant is used in shampoos, bubble baths, light-duty liquids, cutting fluids, drawing compounds, and metalworking cleaners. The product is bio-based, kosher-certified, naturally derived, plant-derived, and sulfate-free.

STEPAN® MWA-261 is a nonionic surfactant designed for low-foaming and defoaming applications. It can also be used functionally as a dispersant and wetting agent and is soluble in ethanol, isopropanol, methanol, toluene, xylene, and perchloroethylene solvents. It can be used as an emulsifier and lubricant in synthetic and semi-synthetic metalworking fluids and as a component of lubricants, gear and chain oils, metalworking fluids, hydraulic fluids, and plasticizers.

STEPAN® MWA-395 is a phosphate ester and can be used as an emulsifier and extreme pressure agent in synthetic and semi-synthetic metalworking fluids. It can be used as a component of lubricants, gear and chain oils, metalworking fluids, hydraulic fluids, and plasticizers. It is soluble in water and slightly soluble in oil, yielding very low surface tension and cmc values.

MAKON® 8 serves similarly to makon® 12, functioning as a high-active nonionic surfactant with versatile applications. Its use spans agricultural applications, detergents, sanitizers, industrial cleaners, metal cleaners, textiles, and paper deinking. Just like MAKON® 8's counterpart, it holds kosher certification.

STEPAN® MWA-160 is a powder sodium lauryl sulfate product for use in metalworking applications. It is used in the emulsification of components and can enable improved performance in metal cleaning. It can also be used to efficiently remove oil from metal surfaces.

BIO-SOFT® N1-7 is a c11 linear alcohol ethoxylate delivering fast wetting, moderate to high foam, emulsification abilities, and effective detergency. Its application spans laundry detergents, textiles, hard surface cleaning, paints, and institutional and industrial cleaning. It meets the u.S. Epa safer choice program's surfactant screen and cleangredients listing, ensuring environmental and safety compliance.

ONYXIDE® 200 is a highly active bacteriocide and fungicide. It is a preservative for use in metalworking cutting fluids, gas and oil drilling muds and packer fluids, oil field drilling, completion and fracturing fluids, industrial adhesives, emulsions, and inks (non-food use).

WACKER® APF 130 is a clear, colorless, and odorless polydimethylsiloxane with a high proportion of phenyl groups. This versatile fluid finds widespread application as a heat transfer fluid and a pressure transfer fluid. It also demonstrates excellent performance as a dielectric in capacitors and transformers and serves as a reliable base fluid in heat-resistant lubricants.

WACKER® AP 500 is a clear, colorless, and odorless polydimethylsiloxane with a high proportion of phenyl groups. It is commonly used as a heat transfer fluid and a pressure transfer fluid. Additionally, it serves as a dielectric in capacitors and transformers as well as a base fluid in heat-resistant lubricants. For practical purposes, the useful temperature range of WACKER® AP 500 is between -35 °C and +200 °C.

WACKER® AS 100 Silicone fluid is a clear, colorless, and odorless polydimethylsiloxane with a low proportion of phenyl groups. It serves as a versatile damping fluid, providing excellent vibration and noise reduction in various applications. Additionally, it is commonly used as a heat transfer fluid and serves as a base fluid for low temperature lubricants.

SILFOAM® SC 370 is a medium viscosity antifoam agent that offers stability against hydrolysis. It contains 100% active ingredients and is formulated with an organically modified silicone fluid. In contrast to antifoam agents based on pure silicone fluids (PDMS), SILFOAM® SC 370 generally demonstrates improved compatibility with organic systems.

SILFOAM® SD 860 is an anhydrous silicone antifoam agent formulated with organofunctional silicone fluid and organic components. It exhibits excellent dispersibility in water. This antifoam agent is particularly suitable for use in organic systems that require a high level of compatibility with the antifoam agent. SILFOAM® SD 860 can effectively address challenges commonly encountered by silicones in various applications, including paints, adhesives, and water-miscible cooling lubricants.

WACKER® W 23 is a white, waxy, alkyl-modified polysiloxane that is resistant to hydrolysis and exhibits a very high affinity for various substrates. It is mainly used in the Polish sector. Due to its high substantivity, it is recommended for car polishes and paint conditioners as it renders the treated paint surface extremely resistant to detergents and weathering for long periods of time.

SILFOAM® SD 670 is an anhydrous antifoam agent based on organofunctional silicone fluids, which exhibit high compatibility with organic systems. SILFOAM® SD 670 is a self-dispersing product that spontaneously forms a fine dispersion when added to water. It is recommended for all organic systems that require a highly compatible antifoam agent.

SILFOAM® SC 369 is a medium viscosity antifoam agent with a 100% active ingredient content. It is formulated with an organically modified silicone fluid. Compared to antifoam agents based on pure silicone fluids (PDMS), SILFOAM® SC 369 demonstrates enhanced compatibility with organic systems in general.

SILFOAM® SD 882 is an anhydrous, low viscosity antifoam agent that has the ability to form a fine dispersion when introduced to water or highly polar systems. Its degree of organomodification allows it to effectively control negative effects such as surface defects and separation tendencies.

WACKER® 50550/8 VP is a waxy, alkyl-modified polysiloxane known for its hydrolysis resistance and strong affinity to different substrates. Primarily utilized in the polish sector, this product is particularly recommended for car polishes and paint conditioners. Its high substantivity ensures that the treated paint surface remains highly resistant to detergents and weathering over extended periods of time, providing long-lasting protection.

WACKER® AP 1000 STAB is a clear, brown-colored polydimethylsiloxane with a high proportion of phenyl groups. This specially stabilized product exhibits excellent thermal stability. It is primarily used as a heat transfer fluid and a pressure transfer fluid. For practical purposes, the useful temperature range of WACKER® AP 1000 STAB is between -35 °C and +250 °C. However, this presupposes that heat-stressing of the fluid occurs under "chemically pure" conditions.

WACKER® AP 1000 is a clear, colorless, and odorless polydimethylsiloxane with a high proportion of phenyl groups. It finds application as a heat transfer fluid, a pressure transfer fluid, a dielectric in capacitors and transformers, and as the base fluid for heat-resistant lubricants.

SILFOAM® SRE is a versatile antifoam that contains 20% active ingredients and 33% solids. It is relatively rich in emulsifier but has a low viscosity, making it easy to measure accurately. SILFOAM® SRE also demonstrates high resistance to alkalis and acids, allowing for its application in a wide range of pH-sensitive scenarios.

WACKER® AP 200 is a clear, colorless, and odorless polydimethylsiloxane with a high proportion of phenyl groups. It is commonly used as a heat transfer fluid and a pressure transfer fluid. Additionally, it serves as a dielectric in capacitors and transformers as well as a base fluid in heat-resistant lubricants.

HDK® H18 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H18 is used as a thickening and thixotropic agent in composites, coatings, adhesives, and sealants, particularly in vinylester, epoxy, and polyurethane systems.

SILFOAM® SE 1661 is a water-dilutable antifoam emulsion with a medium viscosity and excellent storage stability, thanks to its nonionic emulsifier system. This product serves the dual purpose of preventing foam formation (as an antifoam) and eliminating existing foam (as a defoamer) in a wide range of aqueous systems. SILFOAM® SE 1661 is particularly well-suited for applications where the use of silicones could typically present challenges, such as PVC degassing, the manufacturing and processing of polymer dispersions for textiles, paper, paints, surface coatings, and adhesives, as well as cooling lubricants and textile formulations.

WACKER® APF 130 STAB is a clear, brown-colored polydimethylsiloxane with a high proportion of phenyl groups. It possesses excellent thermal stability and has a specially designed stabilization system, ensuring its reliability in various applications. With its low volatility, WACKER® APF 130 STAB is particularly well-suited for use as a heat transfer fluid and pressure transfer fluid.

SILFOAM® SE 39 is a low-viscosity antifoam emulsion known for its long-lasting efficiency. It is especially well-suited for surfactant-rich formulations like liquid detergents and textile auxiliaries. SILFOAM® SE 39 is particularly effective in applications where high surfactant concentrations or intense product movement would quickly render conventional antifoam emulsions ineffective.

Dragonox® 1315 is a low-viscosity liquid-type antioxidant. Due to its alkyl chain, this product has a broad compatibility range and is soluble in various substances. It is an excellent antioxidant for polymers (such as PVC, ABS, etc.), lubricating oil, and polyurethane foam.

TEGO® Antifoam MR 507 is an organo-modified siloxane-based antifoam that is designed for foam control in non-aqueous media. It has a high silicone content, which makes it more effective than conventional products in bio-treated diesel fuels. TEGO® Antifoam MR 507 reduces foam collapse time and initial foam height, and it maintains its performance even in wet fuel and after storage for over four weeks. It also has excellent water shedding properties and a reduced treat rate compared to conventional antifoams based on polyether siloxanes. TEGO® Antifoam MR 507 is compatible with a wide range of diesel additive packages and can be incorporated into low-solvent formulations. It is also stable at low temperatures and can be used with conventional non-polar solvents.

AEROSIL® R 106 is a hydrophobic fumed silica after treated with D4 (Octamethylcyclotetrasiloxane).

AEROSIL® 300 is a hydrophilic fumed silica with a specific surface area of 300 m²/g.

AEROXIDE® Alu C is a fine-particulate, pure aluminum oxide (Al₂O₃) with high specific surface area and marked aggregate and agglomerate structure. Because of it high purity and low water content, the product can be used well as an additive to anorganic materials, for heat insulation, and also as a catalyst substrate. The positive surface charge can be used to control the electrostatic charge.

AEROSIL® R 974 is hydrophobic fumed silica grades treated with DDS (Dichlordimethylsilane). The moderate hydrophobicity of these AEROSIL® products is suited for defoaming properties in the presence of appropriate hydrophobic liquids. They are recommended for improving the sedimentation stability of defoamer dispersions as well.

TEGO® Antifoam 2080 is a liquid antifoam formulated with organo-modified siloxanes. It excels in controlling foam within non-aqueous media, primarily finding its application in metalworking fluids. This product functions as an effective anti-foaming agent, contributing to the enhancement of fluid and lubricant solutions in the realm of industrial technology.

TEGO® Antifoam 3062 is an emulsion antifoam featuring organo-modified siloxanes, primarily functioning as an anti-foaming agent. Notably compatible, it is suitable for use in the paper and pulp industry, especially in the production of coated paper and paperboard. In addition, it finds application in pressure-sensitive adhesive formulations within the CASE ingredients category.

TAGAT® V 20 is a non-ionic emulsifier that is based on POE-20 glycerol oleoricinoleate. It is a low-foaming emulsifier that finds use in a wide range of applications such as metal working fluids, concrete release agents, textile auxiliary formulations, and pulp and paper defoamers. TAGAT® V 20 is derived from natural raw materials, which makes it dermatologically safe and environmentally friendly. It has excellent emulsifying and stabilizing properties, which ensure the formation of finely dispersed and long-lasting stable oil-in-water emulsions. TAGAT® V 20 also enhances the solubility of biocides in mineral oil-based lubricants and improves the lubricating properties of water-mixed fluids. It has a low foaming tendency and provides excellent thermal stability.

TEGO® Antifoam MR 1015 is a highly efficient 70% active antifoam concentrate that is based on modified siloxanes. Its unique formulation and modification of the active material provide excellent efficiency and maximum compatibility, making it a superior product compared to traditional silicone oil-based antifoams. TEGO® Antifoam MR 1015 eliminates undesirable effects such as silicone spotting and fish eyes in most applications. It is highly stable in alkaline and electrolyte environments, even at higher temperatures. Additionally, TEGO® Antifoam MR 1015 is easily dispersible in water, making it easy to handle. It is an ideal antifoam concentrate for a wide range of applications where maximum compatibility and excellent efficiency are required.

AEROSIL® 200 HV is a hydrophilic fumed silica with a specific surface area of 200 m²/g.