Products in Additives

STEPAN® MWA-261 is a nonionic surfactant designed for low-foaming and defoaming applications. It can also be used functionally as a dispersant and wetting agent and is soluble in ethanol, isopropanol, methanol, toluene, xylene, and perchloroethylene solvents. It can be used as an emulsifier and lubricant in synthetic and semi-synthetic metalworking fluids and as a component of lubricants, gear and chain oils, metalworking fluids, hydraulic fluids, and plasticizers.

MAKON® 8 serves similarly to makon® 12, functioning as a high-active nonionic surfactant with versatile applications. Its use spans agricultural applications, detergents, sanitizers, industrial cleaners, metal cleaners, textiles, and paper deinking. Just like MAKON® 8's counterpart, it holds kosher certification.

STEPAN® MWA-160 is a powder sodium lauryl sulfate product for use in metalworking applications. It is used in the emulsification of components and can enable improved performance in metal cleaning. It can also be used to efficiently remove oil from metal surfaces.

BIO-SOFT® N1-7 is a c11 linear alcohol ethoxylate delivering fast wetting, moderate to high foam, emulsification abilities, and effective detergency. Its application spans laundry detergents, textiles, hard surface cleaning, paints, and institutional and industrial cleaning. It meets the u.S. Epa safer choice program's surfactant screen and cleangredients listing, ensuring environmental and safety compliance.

ONYXIDE® 200 is a highly active bacteriocide and fungicide. It is a preservative for use in metalworking cutting fluids, gas and oil drilling muds and packer fluids, oil field drilling, completion and fracturing fluids, industrial adhesives, emulsions, and inks (non-food use).

ZELEC® 874 is an ester that finds utility in a diverse range of metalworking and textile applications. Notably, the product is biodegradable. Furthermore, zelec 874 can be regarded as practically non-toxic when ingested (ld50 > 5g/kg) and shows minimal irritation potential to the skin and eyes. It belongs to the chemical group of pentaerythritol ester specialty. Its primary function revolves around being a textile lubricating agent.

STEPAN® MWA-395 is a phosphate ester and can be used as an emulsifier and extreme pressure agent in synthetic and semi-synthetic metalworking fluids. It can be used as a component of lubricants, gear and chain oils, metalworking fluids, hydraulic fluids, and plasticizers. It is soluble in water and slightly soluble in oil, yielding very low surface tension and cmc values.

SILFOAM® SRE is a versatile antifoam that contains 20% active ingredients and 33% solids. It is relatively rich in emulsifier but has a low viscosity, making it easy to measure accurately. SILFOAM® SRE also demonstrates high resistance to alkalis and acids, allowing for its application in a wide range of pH-sensitive scenarios.

WACKER® APF 130 is a clear, colorless, and odorless polydimethylsiloxane with a high proportion of phenyl groups. This versatile fluid finds widespread application as a heat transfer fluid and a pressure transfer fluid. It also demonstrates excellent performance as a dielectric in capacitors and transformers and serves as a reliable base fluid in heat-resistant lubricants.

SILFOAM® SC 369 is a medium viscosity antifoam agent with a 100% active ingredient content. It is formulated with an organically modified silicone fluid. Compared to antifoam agents based on pure silicone fluids (PDMS), SILFOAM® SC 369 demonstrates enhanced compatibility with organic systems in general.

SILFOAM® SD 882 is an anhydrous, low viscosity antifoam agent that has the ability to form a fine dispersion when introduced to water or highly polar systems. Its degree of organomodification allows it to effectively control negative effects such as surface defects and separation tendencies.

SILFOAM® SC 370 is a medium viscosity antifoam agent that offers stability against hydrolysis. It contains 100% active ingredients and is formulated with an organically modified silicone fluid. In contrast to antifoam agents based on pure silicone fluids (PDMS), SILFOAM® SC 370 generally demonstrates improved compatibility with organic systems.

WACKER® AP 1000 STAB is a clear, brown-colored polydimethylsiloxane with a high proportion of phenyl groups. This specially stabilized product exhibits excellent thermal stability. It is primarily used as a heat transfer fluid and a pressure transfer fluid. For practical purposes, the useful temperature range of WACKER® AP 1000 STAB is between -35 °C and +250 °C. However, this presupposes that heat-stressing of the fluid occurs under "chemically pure" conditions.

WACKER® 50550/8 VP is a waxy, alkyl-modified polysiloxane known for its hydrolysis resistance and strong affinity to different substrates. Primarily utilized in the polish sector, this product is particularly recommended for car polishes and paint conditioners. Its high substantivity ensures that the treated paint surface remains highly resistant to detergents and weathering over extended periods of time, providing long-lasting protection.

WACKER® AP 1000 is a clear, colorless, and odorless polydimethylsiloxane with a high proportion of phenyl groups. It finds application as a heat transfer fluid, a pressure transfer fluid, a dielectric in capacitors and transformers, and as the base fluid for heat-resistant lubricants.

SILFOAM® SD 670 is an anhydrous antifoam agent based on organofunctional silicone fluids, which exhibit high compatibility with organic systems. SILFOAM® SD 670 is a self-dispersing product that spontaneously forms a fine dispersion when added to water. It is recommended for all organic systems that require a highly compatible antifoam agent.

WACKER® W 23 is a white, waxy, alkyl-modified polysiloxane that is resistant to hydrolysis and exhibits a very high affinity for various substrates. It is mainly used in the Polish sector. Due to its high substantivity, it is recommended for car polishes and paint conditioners as it renders the treated paint surface extremely resistant to detergents and weathering for long periods of time.

WACKER® AS 100 Silicone fluid is a clear, colorless, and odorless polydimethylsiloxane with a low proportion of phenyl groups. It serves as a versatile damping fluid, providing excellent vibration and noise reduction in various applications. Additionally, it is commonly used as a heat transfer fluid and serves as a base fluid for low temperature lubricants.

WACKER® AP 500 is a clear, colorless, and odorless polydimethylsiloxane with a high proportion of phenyl groups. It is commonly used as a heat transfer fluid and a pressure transfer fluid. Additionally, it serves as a dielectric in capacitors and transformers as well as a base fluid in heat-resistant lubricants. For practical purposes, the useful temperature range of WACKER® AP 500 is between -35 °C and +200 °C.

WACKER® AP 200 is a clear, colorless, and odorless polydimethylsiloxane with a high proportion of phenyl groups. It is commonly used as a heat transfer fluid and a pressure transfer fluid. Additionally, it serves as a dielectric in capacitors and transformers as well as a base fluid in heat-resistant lubricants.

SILFOAM® SD 860 is an anhydrous silicone antifoam agent formulated with organofunctional silicone fluid and organic components. It exhibits excellent dispersibility in water. This antifoam agent is particularly suitable for use in organic systems that require a high level of compatibility with the antifoam agent. SILFOAM® SD 860 can effectively address challenges commonly encountered by silicones in various applications, including paints, adhesives, and water-miscible cooling lubricants.

HDK® H18 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H18 is used as a thickening and thixotropic agent in composites, coatings, adhesives, and sealants, particularly in vinylester, epoxy, and polyurethane systems.

SILFOAM® SE 1661 is a water-dilutable antifoam emulsion with a medium viscosity and excellent storage stability, thanks to its nonionic emulsifier system. This product serves the dual purpose of preventing foam formation (as an antifoam) and eliminating existing foam (as a defoamer) in a wide range of aqueous systems. SILFOAM® SE 1661 is particularly well-suited for applications where the use of silicones could typically present challenges, such as PVC degassing, the manufacturing and processing of polymer dispersions for textiles, paper, paints, surface coatings, and adhesives, as well as cooling lubricants and textile formulations.

SILFOAM® SE 39 is a low-viscosity antifoam emulsion known for its long-lasting efficiency. It is especially well-suited for surfactant-rich formulations like liquid detergents and textile auxiliaries. SILFOAM® SE 39 is particularly effective in applications where high surfactant concentrations or intense product movement would quickly render conventional antifoam emulsions ineffective.

WACKER® APF 130 STAB is a clear, brown-colored polydimethylsiloxane with a high proportion of phenyl groups. It possesses excellent thermal stability and has a specially designed stabilization system, ensuring its reliability in various applications. With its low volatility, WACKER® APF 130 STAB is particularly well-suited for use as a heat transfer fluid and pressure transfer fluid.

Dragonox® 1315 is a low-viscosity liquid-type antioxidant. Due to its alkyl chain, this product has a broad compatibility range and is soluble in various substances. It is an excellent antioxidant for polymers (such as PVC, ABS, etc.), lubricating oil, and polyurethane foam.

TEGO® Antifoam 793 is a 100% active defoamer concentrate utilizing polyether-modified siloxanes. It functions as a defoamer primarily in fluids and lubricant applications. Available in liquid form, this product belongs to the chemical family of polyether siloxanes. It is used in various industrial settings, including metalworking fluids, hydraulic oils, and fluids, as well as textile auxiliaries.

AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g.

TEGO® Surten W 111 is a non-ionic organic surfactant known for its wetting properties. It operates as a non-foaming surfactant with low foaming characteristics. This product is valued for being solvent-free and silicone-free. It finds application in various contexts, offering high efficiency, an appealing cost-to-performance ratio, superior compatibility, and the advantage of causing no negative side effects.

AEROSIL® R 202 is a hydrophobic fumed silica grade, treated with a polydimethylsiloxane. This product can be used in defoamer formulations for sedimentation stabilization and due to its high hydrophobicity as defoaming component.

DYNOL® 604 is a high-performance, non-ionic organic superwetter known for its excellent equilibrium and dynamic surface tension reduction, a hallmark of the Dynol brand. It exhibits lower foam and dynamic surface tension values compared to the more hydrophilic DYNOL® 607 surfactant. Moreover, comparative wetting performance tests have demonstrated that DYNOL® 604 Surfactant serves as an excellent alternative to conventional fluorosurfactants and offers a cost-effective solution in place of new fluorosurfactant technology.

TEGO® SML 20 is a liquid emulsifier that is non-ionic and made of polyoxyethylene-(20)-sorbitan monolaurate. It is used as a solubilizer for oils and dyestuffs, as well as a defoamer and antistatic agent in textile formulations. TEGO® SML 20 is compatible with anionic, cationic, and amphoteric surfactants due to its non-ionic nature. It is also biodegradable and has good environmental behavior. When used as a co-emulsifier, it exhibits synergistic effects with other surfactants.

TEGO® Antifoam 1488 is a versatile emulsion-based anti-foaming agent tailored for various applications. It effectively controls foam formation in processes like emulsion polymerization and textile sizing. With good compatibility, it finds use in diverse industrial additives, including metalworking fluids and nonwovens. This emulsion-type additive is available in drums, catering to different production scales. Its performance spans markets like adhesives and sealants, fluids and lubricants, and building materials. TEGO® Antifoam 1488's role in polymer dispersions manufacturing adds to its versatility and value.

TEGO® Antifoam 3062 is an emulsion antifoam featuring organo-modified siloxanes, primarily functioning as an anti-foaming agent. Notably compatible, it is suitable for use in the paper and pulp industry, especially in the production of coated paper and paperboard. In addition, it finds application in pressure-sensitive adhesive formulations within the CASE ingredients category.

AEROSIL® R 106 is a hydrophobic fumed silica after treated with D4 (Octamethylcyclotetrasiloxane).

TEGO® Antifoam MR 507 is an organo-modified siloxane-based antifoam that is designed for foam control in non-aqueous media. It has a high silicone content, which makes it more effective than conventional products in bio-treated diesel fuels. TEGO® Antifoam MR 507 reduces foam collapse time and initial foam height, and it maintains its performance even in wet fuel and after storage for over four weeks. It also has excellent water shedding properties and a reduced treat rate compared to conventional antifoams based on polyether siloxanes. TEGO® Antifoam MR 507 is compatible with a wide range of diesel additive packages and can be incorporated into low-solvent formulations. It is also stable at low temperatures and can be used with conventional non-polar solvents.