Products in Other Basic Thermoplastics

100 Products found in Other Basic Thermoplastics

TDSWith TDS

SACO AEI PolymersTHERMODAN® HF 0103-212 NT

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:Flame Retardant
End Uses:Wires, Low Voltage Insulation, Cables
Density:1500.0 - 1500.0 kg/m³

SACO AEI Polymers THERMODAN® HF 0103-212 NT is a flame retardant non-halogen thermoplastic wire and cable compound. It is designed for use in a variety of jacketing applications. This compound has superior fire performance including slow flame propagation, low smoke production and low smoke corrosivity. THERMODAN® HF 0103-212NT can be used as a jacket compound on cables recognized under UL 1277 tray cables and can pass flame retardant requirements set forth under UL 1685, IEEE 1202 and FT-4. THERMODAN® HF 0103-212 NT is recognized under UL 2885 as being halogen free. It is natural in color and UV resistant.

SACO AEI PolymersTHERMODAN® HF TP870BU

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:Flame Retardant, UV Stabilizer
End Uses:Wires, Cables
Density:1460.0 - 1460.0 kg/m³

THERMODAN® HF TP870BU has been developed specially to meet general requirements of BS 7655 Section 6.1 type LTS 1.

SACO AEI PolymersTHERMODAN® HF TP832NU

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:UV Stabilizer, Flame Retardant
End Uses:Wires, Cables
Density:1500.0 - 1500.0 kg/m³

THERMODAN® HF TP832NU has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables sheathed with TP832 have received LPCB approval.

SACO AEI PolymersTHERMODAN® HF TP832

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:Flame Retardant
End Uses:Wires, Low Voltage Insulation, Cables
Density:1500.0 - 1500.0 kg/m³

THERMODAN® HF TP832 has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables sheathed with TP832 have received LPCB approval.

SACO AEI PolymersTHERMODAN® HF TP870

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:Flame Retardant
End Uses:Wires, Cables
Density:1460.0 - 1460.0 kg/m³

THERMODAN® HF TP870 has been developed specially to meet general requirements of BS 7655 Section 6.1 type LTS 1.

SACO AEI PolymersTHERMODAN® HF TP837BU

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:Flame Retardant, UV Stabilizer
End Uses:Wires, Cables
Density:1520.0 - 1520.0 kg/m³

THERMODAN® HF TP837BU has been developed specially to offer good processability, very fast extrusion process with very low die drool.

SACO AEI PolymersTHERMODAN® HF TP543CBU2

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:Carbon Black, Flame Retardant
End Uses:Cables, Jacketing, Wires, Cable Jacketing
Density:1540.0 - 1540.0 kg/m³

THERMODAN® TP543CBU2 has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C2 have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.

SACO AEI PolymersTHERMODAN® HF TP543C2

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:UV Stabilizer, Flame Retardant
End Uses:Low Voltage Insulation, Cables, Wires
Density:1540.0 - 1540.0 kg/m³

THERMODAN® HF TP543C2 has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C2 have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.

SACO AEI PolymersTHERMODAN® HF TP521BU

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:Carbon Black, Flame Retardant
End Uses:Wires, Cables
Density:1480.0 - 1480.0 kg/m³

THERMODAN® HF TP521BU has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP521 have passed the 3m3 smoke density chamber test to IEC 61034-2.

SACO AEI PolymersTHERMODAN® HF TP543C

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:Flame Retardant
End Uses:Low Voltage Insulation, Cables, Jacketing, Wires, Cable Jacketing
Density:1540.0 - 1540.0 kg/m³

THERMODAN® HF TP 543C has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.

SACO AEI PolymersTHERMODAN® HF TP521

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:Flame Retardant
End Uses:Wires, Cables
Density:1480.0 - 1480.0 kg/m³

THERMODAN® HF TP521 has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP521 have passed the 3m3 smoke density chamber test to IEC 61034-2.

SACO AEI PolymersTHERMODAN® HF TP832BUT

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:Carbon Black, Flame Retardant, Antimicrobial
End Uses:Cables, Wires
Density:1500.0 - 1500.0 kg/m³

THERMODAN® HF TP832BUT has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables sheathed with TP832 have received LPCB approval.

SACO AEI PolymersTHERMODAN® HF TP519CNU

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:Stabilizer (Unspecified), Flame Retardant
End Uses:Cables, Wires, Low Voltage Insulation, Cable Jacketing, Jacketing
Density:1500.0 - 1500.0 kg/m³

THERMODAN® HF TP519C has been developed specially to offer good processability, very fast extrusion process with very low die drool.

SACO AEI PolymersTHERMODAN® HF TP521NU

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:UV Stabilizer, Flame Retardant
End Uses:Wires, Cables
Density:1480.0 - 1480.0 kg/m³

THERMODAN® HF TP521NU has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP521 have passed the 3m3 smoke density chamber test to IEC 61034-2.

SACO AEI PolymersTHERMODAN® HF TP835

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:Flame Retardant
End Uses:Wires, Cables
Density:1480.0 - 1480.0 kg/m³

THERMODAN® HF TP835 has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP835 have passed the 3m3 smoke density chamber test to IEC 61034-2.

SACO AEI PolymersTHERMODAN® HF TP519CBU

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:Carbon Black, Flame Retardant
End Uses:Low Voltage Insulation, Cables, Jacketing, Wires, Cable Jacketing
Density:1500.0 - 1500.0 kg/m³

THERMODAN® HF TP519CBU has been developed specially to offer good processability, very fast extrusion process with very low die drool.

SACO AEI PolymersTHERMODAN® HF TP812NU

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:Flame Retardant, UV Stabilizer
End Uses:Wires, Cables
Density:1490.0 - 1490.0 kg/m³

THERMODAN® HF TP812NU has been developed specially to offer good processability, fast extrusion process with very low die drool. TP812 is capable of meeting the flame retardant requirements of UL 1666, UL 1685, IEEE 1202, FT-4 in specific fiber optic constructions. It is also recognized as halogen free under UL 2885. It can be extruded using PVC extruders and screws. It possesses excellent tensile and flame retardant properties and meets the requirements of limited toxic and corrosive fume emission

SACO AEI PolymersTHERMODAN® HF TP519CB

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:Flame Retardant
End Uses:Low Voltage Insulation, Cables, Jacketing, Wires, Cable Jacketing
Density:1500.0 - 1500.0 kg/m³

THERMODAN® HF TP519CB has been developed specially to offer good processability, very fast extrusion process with very low die drool.

SACO AEI PolymersTHERMODAN® HF TP343NT

Polymer Name:Thermoplastic (unspecified)
End Uses:Wires, Lszh Jacketing, Cable Jacketing, Cables, Jacketing
Density:1640.0 - 1640.0 kg/m³

THERMODAN® HF TP343NT is a Patent Pending High Performance, Low Smoke Halogen-Free, Thermoplastic Wire and Cable Compound. This compound has superior fire performance, low smoke production and contains no halogens. When used as a jacket for Fiber Optic Cables, TP343NT can assist the cable maker in meeting the stringent new European CPR Regulations at the B2ca Classification (Cable Design Dependant | Actual Results May Vary). THERMODAN® HF TP343NT is natural in color, UV resistant, and is certified Halogen Free by UL to UL2885

SACO AEI PolymersTHERMODAN® HF TP543CBT

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:Flame Retardant
End Uses:Low Voltage Insulation, Cables, Jacketing, Wires, Cable Jacketing
Density:1540.0 - 1540.0 kg/m³

THERMODAN® HF TP 543CBT has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.

SACO AEI PolymersTHERMODAN® HF TP812BU

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:Flame Retardant, Carbon Black
End Uses:Wires, Cables
Density:1490.0 - 1490.0 kg/m³

THERMODAN® HF TP812BU has been developed specially to offer good processability, fast extrusion process with very low die drool. TP812 is capable of meeting the flame retardant requirements of UL 1666, UL 1685, IEEE 1202, FT-4 in specific fiber optic constructions. It is also recognized as halogen free under UL 2885. It can be extruded using PVC extruders and screws. It possesses excellent tensile and flame retardant properties and meets the requirements of limited toxic and corrosive fume emission

SACO AEI PolymersTHERMODAN® HF 0103-212 BK

Polymer Name:Thermoplastic (unspecified)
Additives Included:Flame Retardant
End Uses:Cable Jacketing, Jacketing, Lszh Jacketing, Electronic Cable Jacketing, Wire Jacketing
Density:1510.0 - 1510.0 kg/m³

THERMODAN® HF 0103-212 BK is a black, non-halogen thermoplastic wire and cable compound. It is designed for use in a wide variety of jacketing applications. This compound has superior fire performance; including slow flame propagation, self-extinguishing characteristics, and low smoke production. It is suitable for use as a jacket compound for cables recognized under UL 1277 tray cables and can pass flame retardant requirements set forth under UL 1685, IEEE 1202 and FT-4. THERMODAN® HF 0103-212 BK is recognized under UL 2885 as being halogen free. It is UV resistant and RoHS compliant.

SACO AEI PolymersTHERMODAN® HF TP543CBU

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:Flame Retardant
End Uses:Low Voltage Insulation, Cables, Jacketing, Wires, Cable Jacketing
Density:1540.0 - 1540.0 kg/m³

THERMODAN® HF TP 543CBU has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.

SACO AEI PolymersTHERMODAN® HF TP837B

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:Flame Retardant
End Uses:Wires, Cables
Density:1520.0 - 1520.0 kg/m³

THERMODAN® HF TP837B has been developed specially to offer good processability, very fast extrusion process with very low die drool.

SACO AEI PolymersTHERMODAN® HF TP870NU

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:Flame Retardant, UV Stabilizer
End Uses:Wires, Cables
Density:1460.0 - 1460.0 kg/m³

THERMODAN® HF TP870NU has been developed specially to meet general requirements of BS 7655 Section 6.1 type LTS 1.

SACO AEI PolymersTHERMODAN® HF TP837NU

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:Flame Retardant, UV Stabilizer
End Uses:Wires, Cables
Density:1520.0 - 1520.0 kg/m³

THERMODAN® HF TP837NU has been developed specially to offer good processability, very fast extrusion process with very low die drool.

SACO AEI PolymersTHERMODAN® HF TP837

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:Flame Retardant
End Uses:Wires, Cables
Density:1520.0 - 1520.0 kg/m³

THERMODAN® HF TP837 has been developed specially to offer good processability, very fast extrusion process with very low die drool.

SACO AEI PolymersTHERMODAN® HF TP832BU

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:Carbon Black, Flame Retardant
End Uses:Wires, Cables
Density:1500.0 - 1500.0 kg/m³

THERMODAN® HF TP832BU has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables sheathed with TP832 have received LPCB approval.

SACO AEI PolymersTHERMODAN® HF TP519C

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:Flame Retardant
End Uses:Low Voltage Insulation, Cables, Jacketing, Wires, Cable Jacketing
Density:1500.0 - 1500.0 kg/m³

THERMODAN® HF TP519C has been developed specially to offer good processability, very fast extrusion process with very low die drool.

SACO AEI PolymersTHERMODAN® HF TP543COT

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:Flame Retardant
End Uses:Low Voltage Insulation, Cables, Jacketing, Wires, Cable Jacketing
Density:1540.0 - 1540.0 kg/m³

THERMODAN® HF TP 543COT has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.

SACO AEI PolymersTHERMODAN® HF TP870B

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:Flame Retardant
End Uses:Wires, Cables
Density:1460.0 - 1460.0 kg/m³

THERMODAN® HF TP870B has been developed specially to meet general requirements of BS 7655 Section 6.1 type LTS 1.

SACO AEI PolymersTHERMODAN® HF TP812

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:Flame Retardant
End Uses:Wires, Cables
Density:1490.0 - 1490.0 kg/m³

THERMODAN® HF TP812 has been developed specially to offer good processability, fast extrusion process with very low die drool. TP812 is capable of meeting the flame retardant requirements of UL 1666, UL 1685, IEEE 1202, FT-4 in specific fiber optic constructions. It is also recognized as halogen free under UL 2885. It can be extruded using PVC extruders and screws. It possesses excellent tensile and flame retardant properties and meets the requirements of limited toxic and corrosive fume emission

SACO AEI PolymersTHERMODAN® HF TP832NUT

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:UV Stabilizer, Flame Retardant, Antimicrobial
End Uses:Cables, Wires
Density:1500.0 - 1500.0 kg/m³

THERMODAN® HF TP832NUT has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables sheathed with TP832 have received LPCB approval.

SACO AEI PolymersTHERMODAN® HF TP521NUT

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:UV Stabilizer, Flame Retardant, Antimicrobial
End Uses:Cables, Jacketing, Wires, Cable Jacketing
Density:1480.0 - 1480.0 kg/m³

THERMODAN® TP521NUT has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP521 have passed the 3m3 smoke density chamber test to IEC 61034-2.

SACO AEI PolymersTHERMODAN® HF TP851

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:Flame Retardant
End Uses:Wires, Cables
Density:1400.0 - 1400.0 kg/m³

THERMODAN® HF TP851 has been developed specially to comply with the requirements of cable specifications BS 7629, BS 6387 CWZ, BS EN 50200, BS 8434-2 & BS 5839-1 Clause 26.2 PH120 Enhanced. TP851 complies with LTS3 in BS 7655.

SACO AEI PolymersTHERMODAN® HF TP521B

Polymer Name:Thermoplastic (unspecified)
Processing Methods:Extrusion
Additives Included:Flame Retardant
End Uses:Cables, Jacketing, Wires, Cable Jacketing
Density:1480.0 - 1480.0 kg/m³

THERMODAN® TP521B has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP521 have passed the 3m3 smoke density chamber test to IEC 61034-2.

Show

of 100 results