Products results

MOCOM Compounds Alcom® LB PC 1000 14073 WT1164-14 is a polycarbonate-based injection molding grade polymer with a special filler/additive system that provides improved surface appearance and easy flow. This material is highly reflective and designed specifically for use in the automotive and lighting markets.

MOCOM Compounds ALFATER® XL D40I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) that is used in injection molding and is available in natural color and black. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for automotive, building and construction, electrical and electronic, machinery and furniture applications, and can be used for seals, sealing lips, handles, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners, and connectors, and 2K components. It can adhere to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALTECH® PP-H A 2030/100 GF30 is a Polypropylene Homopolymer with 30% glass fibers filler/additive system for various injection molded parts, featuring high stiffness, heat stabilization, slip agent and easy release (demolding). During processing, injection molding should be done using a melt temperature of 200-250°C and a mold temperature of 20-70°C. After processing, the parts should be stored in a dry, light-protected location at a temperature not exceeding 30°C to ensure their quality.

MOCOM Compounds ALFATER® XL A65E 2GP0000 is a Thermoplastic Vulcanisate (PP+EPDM) with a natural color, white, or black. It has high viscosity and good weathering, chemical, ozone, hot air, and hydrolysis resistance. It is suitable for use in the automotive, building and construction, machinery, electrical and electronic, and furniture market segments for extruded parts, blow molded parts, coextrusion profiles, seals, sealing lips, conduits, tubes, cable guides, cable jacketing, bellows, air ducts, and 2K components.

MOCOM Compounds ALFATER® XL A75I 4GP0000 is a black thermoplastic vulcanisate (PP+EPDM) material that features low emission, easy flow, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It can be used in injection molding, with melt temperatures between 190-220°C, mold temperatures of 10-60°C, injection speed of middle to high, and back pressure of greater than 3 bar. It is suitable for use in automotive, building and construction, electrical and electronic, sport and leisure, and furniture applications, such as seals, sealing lip, handles, racking/shelving, soft touch elements, impact protection/shock absorber, protection caps, thin walled parts, profile, cable ducts, 2K components, and casters. It adheres to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, thermoplastic elastomer general, and ethylene propylene diene rubber, and has a service temperature range of -40-125°C.

MOCOM Compounds ALFATER® XL A80I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) polymer with natural color or black color, designed for injection molding applications. It has excellent recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance, making it suitable for automotive, building and construction, electrical and electronic, machinery, furniture, and injection molded parts, such as seals, sealing lip, handles, soft touch elements, impact protection/shock absorber, protection caps, cable ducts, casters, plugs, fastener & connectors, and 2K components.

MOCOM Compounds ALFATER® XL A60I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) base polymer that is used for injection molding applications. It is available in natural color or black and has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for automotive, building and construction, electrical and electronic, machinery, and furniture applications. Typical applications include seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners and connectors, and 2K components. It also has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALFATER® XL A50I 4FC0010 is a thermoplastic vulcanisate (PP+EPDM) polymer with a natural color and bright inherent color. It is suitable for injection molding with a melt temperature of 190-220°C, mold temperature of 10-60°C, and injection speed of middle to high. It has good colorability, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is compliant with EN 71-3 and is suitable for food contact. This polymer is suitable for packaging, household goods, food processing industry, toys, and injection molded parts and has a service temperature range of -40-125°C.

MOCOM Compounds ALFATER® XL A85I 4PA0010 is a black thermoplastic vulcanisate (PP+EPDM) that has been adhesion-modified to polyamide. It offers easy flow, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. Additionally, it has a service temperature range of -40-125°C. ALFATER® XL A85I 4PA0010 is suitable for use in the automotive, building and construction, electrical and electronic, machinery, furniture, and injection molded parts markets, with typical applications including seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, functional components, casters, and 2K components.

MOCOM Compounds ALFATER® XL A60E 2GP0000 is a black thermoplastic vulcanisate (PP+EPDM) with high viscosity, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is suitable for use in automotive, building and construction, machinery, electrical and electronic, and furniture applications, such as for extruded parts, blow molded parts, coextrusion, profiles, seals, sealing lip, conduit, tubes, cable guides, cable jacketing, bellows, and air ducts. It also has adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general. All of these properties make it a versatile material for various applications.

MOCOM Compounds ALFATER® XL A50I 2GP0000 is a thermoplastic vulcanisate (PP+EPDM) with natural color and black color that is used for injection molded parts. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance and hydrolysis resistance. The black color meets the requirements for weathering dry, hot (Kalahari, PV3929) and weathering moist, hot (Florida, PV3930). ALFATER® XL A50I 2GP0000 is used in the market segments of automotive, building and construction, electrical and electronic, machinery, and furniture and its application areas are injection molded parts. Typical applications are seals, sealing lip, handles, soft touch elements, impact protection/shock absorber, protection caps, cable ducts, plugs, fastener & connector, and 2K components. It has adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer and thermoplastic elastomer general. It is widely used across industry applications and provides a great combination of properties.

MOCOM Compounds ALTECH® PC B 2010/100 is a polycarbonate base polymer with 10% glass fibers filler/additive system. It is most commonly used for injection molded parts in the building and construction market segment. Processing Injection molding requires a melt temperature of 310-330°C and a mold temperature of 80-130°C.

MOCOM Compounds ALFATER® XL A40I 3EF0010 is a black thermoplastic vulcanisate (PP+EPDM) designed for injection molding. It has easy flow, high surface quality, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistant properties. It is suitable for automotive, building and construction, electrical and electronic, sport and leisure, and furniture applications. Typical applications include seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, thin walled parts, profiles, cable ducts, and 2K components. It has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general. Its properties make it a suitable choice for numerous industries.

MOCOM Compounds ALFATER® XL A80I 2FE0002 is a thermoplastic vulcanisate (PP+EPDM), black in color, with a high density and noise dampening properties. It is suitable for injection molding, with a melt temperature of 195-230°C and mold temperature of 10-70°C. It has good weathering resistance, is resistant to alkalis, has good ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for applications in the automotive, machinery, building and construction, and electrical and electronic sectors, and has a service temperature range of -40-125°C. For optimal performance, it should be stored dry, protected from light, and tightly sealed, preferably at temperatures not exceeding 30°C.

MOCOM Compounds ALFATER® XL A65I 2GP0050 is a black thermoplastic vulcanisate (PP+EPDM) with good recovery, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is suitable for use in injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, and 2K components. It can be adhered to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general. It has excellent durability and performance.

MOCOM Compounds ALFATER® XL A40I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) polymer with natural color and black options. It has good recovery, weathering, chemical, ozone, hot air, and hydrolysis resistant properties. It is best suited for injection molded parts, seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, plugs, fasteners & connectors, and 2K components. Additionally, it has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer.

MOCOM Compounds ALFATER® XL A90E 2GP0000 is a black thermoplastic vulcanisate (PP+EPDM) that provides good weathering, chemical, ozone, and hot air resistance. It is suitable for extruded parts, blow molded parts, coextrusion, profiles, seals, sealing lips, conduits, tubes, cable guides, cable jacketing, bellows, air ducts, and 2K components, and can be used in the automotive, building and construction, machinery, electrical and electronic, and furniture industries. It has adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALTECH® PP-B A 2030/150 GF30 CP is a heterophasic copolymer made of polypropylene and 30% glass fibers, coupled together chemically and easy to remove. It is heat and processing stable, and is suitable for injection molding with melt temperatures of 200-250°C and mold temperatures of 20-70°C. It is most commonly used for automotive purposes such as functional components, powertrain parts, housings, fixing elements, interior and exterior decoration and finishing. To ensure optimal results, it should be pre-dried in a dry air (dessiccant) dryer or air circulating dryer at temperatures of 80-120°C for 2-4 hours.

MOCOM Compounds ALFATER® XL D40E 2GP0000 is a thermoplastic vulcanisate (PP+EPDM) with a black or natural color. It has high viscosity and good resistance to weathering, chemicals, ozone, hot air, and hydrolysis. It is suitable for use in the automotive, building and construction, machinery, electrical and electronic, and furniture industries for extruded parts, blow molded parts, coextrusion, profiles, seals, sealing lip, conduit, tubes, cable guides, cable jacketing, bellows, and air duct. Additionally, it has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALFATER® XL D50E 2GP0000 is a thermoplastic vulcanisate (PP+EPDM) with a black color, high viscosity, and excellent weathering, chemical, ozone, and hot air resistance. It is suitable for pre-drying in a dry air (dessiccant) dryer at 70-80°C for 2-4 hours. It is recommended for use in automotive, building and construction, machinery, electrical and electronic, and furniture applications, and is suitable for extruded parts, blow molded parts, and coextrusion. Typical applications include profiles, seals, sealing lips, conduit, tubes, cable guides, cable jacketing, bellows, air ducts, and 2K components. It can adhere to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALFATER® XL A35I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) polymer with a natural color and is best suited for injection molding. It is used for applications such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, plugs, fasteners & connectors, and 2K components. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance, making it suitable for use in a variety of industries including automotive, building and construction, electrical and electronic, machinery, furniture, and other industries.

MOCOM Compounds ALFATER® XL A90I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) that is used for injection molding. It has excellent recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for automotive, building and construction, electrical and electronic, machinery, and furniture applications for injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorber, protection caps, cable ducts, casters, plugs, fastener & connector, and 2K components. It has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALFATER® XL ECO D40 2GP0000 is a thermoplastic vulcanisate polymer (PP+EPDM) in black color with polymer recyclate special features, suitable for automotive, building and construction, electrical and electronic, machinery, and furniture applications. Pre-drying conditions should be in a dry air (dessiccant) dryer at 70-80°C for 2-4 hours, with a maximum moisture content of <0.10%. Processing extrusion requires a melt temperature of 190-230°C and an indie temperature of 190-220°C.

MOCOM Compounds ALFATER® XL A85E 2GP0000 is a Thermoplastic Vulcanisate (PP+EPDM) with natural color, black color, and high viscosity. It has good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is used in the Automotive, building and construction, Machinery, electrical and electronic, and Furniture industries for extruded parts, blow molded parts, and coextrusion. It can be used for profile, seals, sealing lip, conduit, tubes, cable guides, cable jacketing, bellows, and air duct, as well as 2K components. Its adhesion to Polypropylene Homopolymer, Polypropylene Copolymer, polyethylene, Thermoplastic Vulcanisate (PP+EPDM), Thermoplastic Olefin Elastomer, and Thermoplastic Elastomer has been tested generally.

MOCOM Compounds ALFATER® XL D40I 2GP0000 is a black thermoplastic vulcanisate (PP+EPDM) with good recovery, weathering resistance, chemical resistance, ozone resistance, and hot air resistance. It is suitable for injection molding and extrusion processes, with melt temperatures of 190-230°C and 200-240°C respectively, and mold temperatures of 10-70°C. Additionally, it has good adhesion to Polypropylene Homopolymer, Polypropylene Copolymer, polyethylene, Thermoplastic Vulcanisate (PP+EPDM), Thermoplastic Olefin Elastomer, and Thermoplastic Elastomer general. It is mainly used in the automotive, building and construction, electrical and electronic, machinery, and furniture industries, and is typically applied to seals, sealing lips, handles, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, profiles, cable jacketing, conduits, and 2K components.

MOCOM Compounds ALTECH® PA6 A 2030/109 GF30 is a Polyamide 6 polymer with 30% glass fibers heat stabilized and easy release (demolding) filler/additive system. It is suitable for injection molding with a melt temperature of 270-290°C and a mold temperature of 80-100°C. This material is suitable for multiple market segments, such as automotive, machinery, building and construction, and is typically used for injection molded parts, exterior parts, interior decoration/finishing, engine and drive systems. To ensure its optimum performance, it should be stored in a cool, dry place, and not exposed to temperatures above 30°C.

MOCOM Compounds ALCOM® PA66 910/1.2 CF30 is a polyamide 66 base polymer with 30% carbon fibers as a filler/additive system, which is electrically conductive, has reduced surface resistivity, is heat stabilized, and has high stiffness. It is suitable for use in the automotive and machinery market segments, with typical applications including bearings and functional components. For optimal performance, it should be pre-dried at 80°C in a dry air (dessiccant) dryer for 2-12 hours with a maximum moisture content of <0.15%. Processing injection molding should be done at a melt temperature of 280-300°C and mold temperature of 80-120°C.

MOCOM Compounds ALCOM® PA66 910/32.1 TCE2 is a special filler-based polyamide 66 with thermal and electrical conductivity, as well as heat stabilization, making it suitable for applications such as electrical components, radiator systems, cooling systems, housings, and functional components. For injection molding, the melt temperature should be 300-320°C and the mold temperature should be 100-130°C. This product is suitable for the automotive, machinery, electrical, electronic, and lighting markets.

MOCOM Compounds ALCOM® PA66 910/32.1 GF8 TCE8 is a polyamide 66 base polymer with a special filler/additive system, including 8% glass fibers, thermal conductive, electrically conductive, and heat stabilized. It is commonly used in the automotive, machinery, electrical and electronic, and lighting industries, and typical applications include housings and functional components. Processing injection molding requires a melt temperature of 300-320°C and a mold temperature of 100-130°C.

Nanoxo Quantsil is an innovative quantum dots containing silicone-based clear and transparent elastomer possessing luminescent and UV filter properties. Quantsil is supplied as a two-part set i.e., the base elastomer (component A) and the curing agent (component B).

Nanoxo Quantsil is an innovative quantum dots containing silicone-based clear and transparent elastomer possessing luminescent and UV filter properties. Quantsil is supplied as a two-part set i.e., the base elastomer (component A) and the curing agent (component B).

OTech Jet is a silver particle-free conductive ink optimized for inkjet printing. It enables the printing of highly conductive, smooth, and uniform layers and patterns. OrelTech’s unique process allows the deposition of highly conductive thin metallic films. The thin layers undergo short development using cold plasma treatment resulting in a fine metal structure. OrelTech’s technology enables the deposition of the ink with many different methods and on various substrates, from plastics to fabrics. OTech inks do not contain nanoparticles, and as such enable the material economy of precious metals while being significantly more environmentally friendly than the existing alternatives on the market.

CGSTAPE - 7258 (7 mil) is a polyimide film, synthesized by polymerizing an aromatic dianhydride and an aromatic diamine. It possesses a unique combination of properties, including excellent electrical and physical properties over a wide range of temperatures.

OTech Platinum LA731 is the world’s first platinum particle-free conductive ink that metallizes into high surface area platinum catalytic structures. This form of platinum structure has an application in fuel cells and batteries. OrelTech’s unique process allows the deposition of highly conductive thin metallic films. The thin layers undergo short development using cold plasma treatment resulting in a fine metal structure. OrelTech’s technology enables the deposition of the ink with many different methods and on various substrates, from plastics to fabrics. OTech inks do not contain nanoparticles, and as such enable the material economy of precious metals while being significantly more environmentally friendly than the existing alternatives on the market.

OTech Platinum TF721 is the world’s first platinum particle-free conductive ink that allows metallization into a full-coverage smooth platinum layer. This form of platinum can find an application as a coating for medical components or even decorative (plated) purposes. OrelTech’s unique process allows the deposition of highly conductive thin metallic films. The thin layers undergo short development using cold plasma treatment resulting in a fine metal structure. OrelTech’s technology enables the deposition of the ink with many different methods and on various substrates, from plastics to fabrics. OTech inks do not contain nanoparticles, and as such enable the material economy of precious metals while being significantly more environmentally friendly than the existing alternatives on the market.