Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Electrical Properties
- Processing Information (Injection Molding)
- Rheological Properties
Value | Units | Test Method / Conditions | |
Flexural Modulus (Dry) | 6300.0 | MPa | ISO 178 |
Flexural Modulus (Conditioned) | 3700.0 | MPa | ISO 178 |
Flexural Strength (Dry) | 180.0 | MPa | ISO 178 |
Flexural Strength (Conditioned) | 105.0 | MPa | ISO 178 |
Tensile Modulus (Dry) | 8400.0 | MPa | ISO 527 |
Tensile Modulus (Conditioned) | 4500.0 | MPa | ISO 527 |
Tensile Strength at Break (Dry) | 130.0 | MPa | ISO 527 |
Tensile Elongation at Break (Dry) | 4.0 | % | ISO 527 |
Tensile Strength at Break (Conditioned) | 90.0 | MPa | ISO 527 |
Tensile Elongation at Break (Conditioned) | 10.0 | % | ISO 527 |
Impact Strength (Dry, Charpy, at 23°C) | 60.0 | kJ/m² | ISO 179/1eU |
Impact Strength (Conditioned, Charpy, at 23°C) | 90.0 | kJ/m² | ISO 179/1eU |
Impact Strength (Dry, Charpy, at -40°C) | 50.0 | kJ/m² | ISO 179/1eU |
Notched Impact Strength (Dry, Charpy, at 23°C) | 13.0 | kJ/m² | ISO 179/1eA |
Notched Impact Strength (Conditioned, Charpy, at 23°C) | 27.0 | kJ/m² | ISO 179/1eA |
Notched Impact (Dry, Charpy, at -40°C) | 4.5 | kJ/m² | ISO 179/1eA |
Value | Units | Test Method / Conditions | |
Density (Dry) | 1130.0 | kg/m³ | ISO 1183 |
Value | Units | Test Method / Conditions | |
HDT / A (Dry, 1.8 MPa) | 204.0 | °C | ISO 75-1/-2 |
DSC (Melt Point, Dry) | 221.0 | °C | ISO 11357 |
Value | Units | Test Method / Conditions | |
Moisture Content | max. 0.15 | % | - |
Value | Units | Test Method / Conditions | |
Surface Resistance (Conditioned) | max. 7800 | Ohm | IEC 62631-3-2 |
Value | Units | Test Method / Conditions | |
Melt Temperature | 270 - 290 | °C | - |
Mould Temperature | 80 - 100 | °C | - |
Value | Units | Test Method / Conditions | |
Shrinkage (Lengthwise, 24h) | 0.2 - 0.4 | % | ISO 294-4 |
Shrinkage (Lateral, 24h) | 0.3 - 0.5 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
80 °C in a dry air (dessiccant) dryer for 2-12 h
Storage & Handling
- Storage Conditions
Store in dry, protected from light.