Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Processing Information (Injection Molding)
- Rheological Properties
Value | Units | Test Method / Conditions | |
Flexural Modulus (Dry) | 3000.0 | MPa | ISO 178 |
Flexural Stress (Dry, 3.5% Strain) | 95.0 | MPa | ISO 178 |
Tensile Modulus (Dry) | 3500.0 | MPa | ISO 527 |
Tensile Stress at Yield (Dry) | 85.0 | MPa | ISO 527 |
Tensile Elongation at Yield (Dry) | 3.7 | % | ISO 527 |
Tensile Elongation at Break (Dry) | 15.0 | % | ISO 527 |
Impact Strength (Dry, Charpy, at 23°C) | no break | kJ/m² | ISO 179/1eU |
Notched Impact Strength (Dry, Charpy, at 23°C) | 4.5 | kJ/m² | ISO 179/1eA |
Value | Units | Test Method / Conditions | |
Density (Dry) | 1140.0 | kg/m³ | ISO 1183 |
Value | Units | Test Method / Conditions | |
HDT / A (Dry, 1.8 MPa) | 68.0 | °C | ISO 75-1/-2 |
DSC (Melt Point, Dry) | 218.0 | °C | ISO 11357 |
Value | Units | Test Method / Conditions | |
Melt Temperature | 250 - 270 | °C | - |
Mould Temperature | 40 - 80 | °C | - |
Value | Units | Test Method / Conditions | |
Shrinkage (Lengthwise, 24h) | 1.3 - 1.4 | % | ISO 294-4 |
Shrinkage (Lateral, 24h) | 1.6 - 1.8 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- In a dry air (dessiccant) dryer <80 °C for 2-12 h
- Dependant on moisture content
Storage & Handling
- Storage Conditions
Store in dry, protected from light not above 30°C.