Products

PEXIDAN® L/T-UV is a high density PEX system consisting of a silane grafted basecompound A-1001 and a catalyst masterbatch CAT-003 (or A-1022 and CAT-117). When mixed and extruded in the proper proportions, the two-component system results in a material that is crosslinkable by exposure to moisture or by immersion in hot water at 90-95°C. PEXIDAN® L/T is listed by NSF International to standards 14 and 61 and to Canadian Standards Association standard B137.5. NSFI certification to ASTM F876 and ASTM F2023 testifies to its superior resistance to oxidation by hot, chlorinated water. PEXIDAN® L/T is permitted to be used in domestic continuous re-circulation systems and is listed by NSF as a NSF-pw CL5 / PEX 5006 material.

PEXIDAN® J/T is a low density flame-retardant XLPE system curable by moisture and consists of a silane pregrafted base compound A-3001 and a flame-retardant catalyst masterbatch CAT-012FR. Mixed and extruded in the proper proportions (60:40), the two components result in a material that is curable by exposure to 70-95°C hot water or even ambient moisture. PEXIDAN® J/T is designed to meet SAE J1128 standards for GXL, TXL and SXL type insulation. PEXIDAN® J/T is halogenated but is RoHS-compliant.

PEXIDAN® HF X/T is a unique low smoke halogen free flame retardant 90°C wet-rated XL-insulation system curable by moisture. It consists of a silane pre-grafted base compound SX651 and a catalyst masterbatch CM540U. Mixed and extruded in the proper proportions (95:5), the two components result in a material that is crosslinkable by exposure to 90°C hot water. PEXIDAN® HF X/T is REACH and RoHS-compliant and is UL 2885 certified to bear the Halogen Free “HF” designation. PEXIDAN® HF X/T is UL-bulletinized and wire made with this insulation system may be marked as Oil Resistant “PR I” and “PR II”, Gas & Oil Resistant “GR I” and “GR II”, “-40C” and “SUNRES” in all colors. This compound will meet a 105°C dry rating.

EXTINITY® 0202-103 is a highly loaded masterbatch of brominated flame retardant pre-dispersed in a polypropylene carrier. It has been designed for use in variety of compounding applications. The pellet form makes the flame retardant easier to handle, more efficient, and can lower overall costs. The product is RoHS compliant.

EXTINITY® 0101-108 is a halogenated, flame retardant compound specifically designed for use in plenum tube applications. This compound has good thermal stability and can be converted easily on standard processing equipment.

THERMODAN® HF TP 543CBU has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.

PEXIDAN® SX546 pre-grafted base is mixed with crosslinking catalyst masterbatch CM493CD, for small cross sections, or CM497CD, in the ratio 95:5, for a 125ºC working temperature system. This system has ambient cure.

THERMODAN® HF TP521NU has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP521 have passed the 3m3 smoke density chamber test to IEC 61034-2.

THERMODAN® HF TP519CB has been developed specially to offer good processability, very fast extrusion process with very low die drool.

PEXIDAN® SX409NT pre-grafted base is mixed with a crosslinking catalyst masterbatch CM401 in the ratio 95:5. The SX409NT:CM401 system has been developed specifically for cables operating up to 36kV. The graft compound contains a non-staining stabilizer and an effective tree retarder, giving outstanding long term retention of dielectric strength. This compound is typically used in conjunction with crosslinkable semi-conducting material for conductor and insulation shields. Crosslinking is obtained by exposure to moist or hot water immersion only.

THERMODAN® HF TP519C has been developed specially to offer good processability, very fast extrusion process with very low die drool.

THERMODAN® HF TP832BUT has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables sheathed with TP832 have received LPCB approval.

EXTINITY® 0101-205 is a natural, non-halogen flame retardant RoHS polyolefin compound. It is designed for use in a wide variety of jacketing and coating applications. This compound has superior fire performance; including slow flame propagation, self-extinguishing characteristics, and low smoke production. EXTINITY® 0101-205 should be extruded with a screw configuration designed to optimize process conditions and throughput.

THERMODAN® HF TP812NU has been developed specially to offer good processability, fast extrusion process with very low die drool. TP812 is capable of meeting the flame retardant requirements of UL 1666, UL 1685, IEEE 1202, FT-4 in specific fiber optic constructions. It is also recognized as halogen free under UL 2885. It can be extruded using PVC extruders and screws. It possesses excellent tensile and flame retardant properties and meets the requirements of limited toxic and corrosive fume emission

THERMODAN® HF TP519CBU has been developed specially to offer good processability, very fast extrusion process with very low die drool.

THERMODAN® HF TP 543CBT has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.

THERMODAN® HF TP835 has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP835 have passed the 3m3 smoke density chamber test to IEC 61034-2.

PEXIDAN® HF SX612ES pre-grafted base is mixed with catalyst masterbatch CM602 or CM601, in an addition rate between 5% and 10%, depending on extrusion conditions. This system has ambient cure. PEXIDAN® HF SX612ES has been designed to meet the requirements of IEC 60092-351 HF90, EN 50363-5, EI5 type, EN 50525-1 and EN 50525-3-41, with enhanced fire resistance to comply with fire testing on smaller cross sections.

THERMODAN® HF TP870NU has been developed specially to meet general requirements of BS 7655 Section 6.1 type LTS 1.

PEXIDAN® SX522A pre-grafted base is mixed with crosslinking catalyst masterbatch CM401 in the ratio 95:5. This system has ambient cure.

THERMODAN® HF TP812BU has been developed specially to offer good processability, fast extrusion process with very low die drool. TP812 is capable of meeting the flame retardant requirements of UL 1666, UL 1685, IEEE 1202, FT-4 in specific fiber optic constructions. It is also recognized as halogen free under UL 2885. It can be extruded using PVC extruders and screws. It possesses excellent tensile and flame retardant properties and meets the requirements of limited toxic and corrosive fume emission

EXTINITY® 0202-104 (formerly known as: EXTINITY® CF101-LM) is a flame retardant masterbatch in a semi-crystalline, co-polymer polypropylene carrier. It has been designed for extrusion, and Wire and Cable insulation applications. The product meets between V-2 and V-0 flammability rating when tested to UL 94 at various thicknesses.

THERMODAN® HF TP837B has been developed specially to offer good processability, very fast extrusion process with very low die drool.

THERMODAN® HF TP521 has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP521 have passed the 3m3 smoke density chamber test to IEC 61034-2.

PEXIDAN® SX523 pre-grafted black base is mixed with crosslinking catalyst masterbatch CM493 or CM497 in the ratio 95:5. This system is carbon loaded, with high UV stabilization, and has been developed especially for usage on overhead power cables insulation according NFC 33-209, “Câble Torsadé”. Crosslinking is obtained by exposure to moist or hot water immersion only.

EXTINITY® C0007-18LM is an extrusion grade UL V-0 recognized copolymer polypropylene based compound.The product features an excellent balance of properties including high impact strength, high elongation and good flexural and tensile properties. EXTINITY® C0007-18LM has an all color UL V-0 rating. Custom colors can be provided. Typical applications including extruded sheet, rod and profiles.

PEXIDAN® HF SX623 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM540U/1 in the ratio 95:5 or CM540U in the ratio 97:3. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX623 has been designed to meet the requirements of IEC 60092-360 SHF2, BS 7655-2.6 SW4 and EN 50264 sheathing applications.

THERMODAN® HF TP837NU has been developed specially to offer good processability, very fast extrusion process with very low die drool.

EXTINITY® 0102-104 is an extrusion grade UL V-0 recognized copolymer polypropylene based compound. The product features an excellent balance of properties including high impact strength, high elongation and good flexural and tensile properties. EXTINITY® 0102-104 has an all color UL V-0 rating. Custom colors can be provided. Typical applications including extruded sheet, rod and profiles.

EXTINITY® 0201-127 is a highly effective flame-retardant concentrate, which will provide excellent flame resistance properties. EXTINITY® 0201-127 easily disperses into a wide range of polyolefins through typical melt blending and is stabilized to impart thermal stability to the finished composition. EXTINITY® 0201-127 is non-blooming and has been designed to alleviate color shift problems when a flame retardant is used in colored films. The product is RoHS compliant.

PEXIDAN® SX409 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM401 in the ratio 95:5. The SX409:CM401 compound has been developed specifically for cables operating up to 36kV. This compound is typically used in conjunction with crosslinkable semi-conducting material for conductor and insulation shields. Crosslinking is obtained by exposure to moist or hot water immersion only.

EXTINITY® 0101-107 is a halogenated, flame retardant compound specifically designed for use in plenum tube applications. This compound has good thermal and ultraviolet stability and can be converted easily on standard processing equipment.

THERMODAN® HF TP832 has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables sheathed with TP832 have received LPCB approval.

THERMODAN® HF TP870 has been developed specially to meet general requirements of BS 7655 Section 6.1 type LTS 1.

EXTINITY® 0203-303 is a highly loaded antimony oxide concentrate in an EVA carrier resin. The antimony oxide content in EXTINITY® 0203-303 is 85% by weight. All SACO AEI Polymers flame retardant concentrates are much more easily dispersed and therefore provide resultant materials with superior physical properties and flame resistance versus the use of additives in their naturally occurring state.

THERMODAN® HF TP832NU has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables sheathed with TP832 have received LPCB approval.