Products

SILPURAN® 6760/50 A/B is a paste-like, easily pigmentable two-component compound with a very short curing time and good mechanical and electrical properties. Vulcanizates are noted for their self-adhesive properties to various substrates combined with a low coefficient of friction. SILPURAN® 6760/50 A/B is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.

ELASTOSIL® LR 3023/60 A/B is a liquid silicone rubber. It is a paste-like, easily pigmentable, two-component compound with short curing times and excellent coolant resistance. Vulcanizates are opaque with average mechanical properties, and they are noted for ultra-low compression sets after post-curing.

ELASTOSIL® AUX Replasticizer 4 is a ready-to-use silicone rubber additive that helps to replastify heavily crepe-hardened solid silicone rubber compounds. Depending on the degree of crepe-hardening, a dosage of 1 - 3 % is recommended. This product has a paste consistency and can easily be incorporated into ELASTOSIL® R and R Plus compounds.

ELASTOSIL® R 760/70 MH is a peroxide-curing, high-consistency silicone rubber with very high green strength, which enhances calendaring and extrusion performance significantly. Uncured extruded hoses show high dimension stability and a non-sticky surface. The addition of heat stabilizers at service temperatures of more than 180°C is recommended.

WACKER® Crosslinker W is a hydrogenpolysiloxane that contains a high percentage of reactive Si-H groups. It is specifically designed for the thermal curing of addition-crosslinking silicone rubbers, both solvent-based and solvent-free. The product exhibits high reactivity, allowing for good adhesion to the substrate. Additionally, it has low volatility and is free of solvents, halogens, and heavy metals.

ELASTOSIL® LR 3040/50 A/B is a liquid silicone rubber from the ELASTOSIL® LR 3040 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. They are particularly noted for their high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent).

SILMIX® E40 White is a compound used for fabricating vulcanizates that display a unique combination of characteristics. They are known for their good flexibility and mechanical properties. SILMIX® E40 White is particularly suitable for fabricating extruded articles. Additionally, post-cured parts made from this compound can be used for food contact applications and are suitable for use under recommendation "XV."

ELASTOSIL® AUX Mould Release Agent 32 is a mold release agent for LSR (liquid silicone rubber) and HTV (high-temperature vulcanizing) injection and compression molding. This product functions as an auxiliary that helps improve the demolding of tools for injection and compression molding.

ELASTOSIL® R Plus 4370/40 is a two-component high consistency silicone rubber specifically designed for the manufacture of extruded articles. It utilizes addition curing and possesses self-bonding properties. This product is particularly suitable for the production of two-component combinations using pressure-free extrusion or co-extrusion methods.

POWERSIL® 732 CS A/B is a two-component, liquid silicone rubber that offers excellent processing properties. The resulting vulcanizates exhibit exceptional mechanical and electrical properties. This product is specifically designed for cold-shrink applications and provides excellent dielectric properties. It is highly suitable for outdoor applications, offering UV and weathering resistance as well as excellent hydrophobic properties.

ELASTOSIL® LR 3003/30 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® LR 3071/50 US A/B is a primerless, self-bonding liquid silicone rubber (LSR) grade that bonds to various plastic substrates (e.g. PA, PBT) and metals but not to the mold. It exhibits excellent mechanical properties, clarity, and pot life and is suitable for food contact applications.

ELASTOSIL® R 416/70 MH is a peroxide-curing, high-consistency silicone rubber with very high green strength, which enhances calendaring and extrusion performance significantly. Uncured extruded hoses show high dimension stability and a non-sticky surface. The addition of heat stabilizers at service temperatures of more than 180°C is recommended.

SILMIX® M40 Gray is a compound used for fabricating vulcanizates that display a unique combination of characteristics. They are recognized for their good flexibility and mechanical properties. SILMIX® M40 Gray is designed for fabricating molded articles. Moreover, post-cured parts made from this compound can be used for food contact applications and are suitable for use under recommendation "XV."

ELASTOSIL® LR 3003/70 US A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound. It is noted for its high transparency, excellent mechanical and electrical properties, and ability to be molded into intricately shaped, precision parts. This series is used for health care applications, including short-term implants. Very brief molding cycles for intricately shaped and flash-free parts are possible.

SILPURAN® 6600/50 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. Compared to the SILPURAN® 6000 series, the coefficient of friction of a post-cured article made of SILPURAN® 6600 is reduced by 50–70%. SILPURAN® 6600/50 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

POWERSIL® 466 A/B is a ready-to-use, two-component system of liquid silicone rubber. It exhibits medium conductivity and offers stable electrical properties along with good mechanical properties. The material is characterized by high elongation at break and low tension set, ensuring flexibility and durability in applications.

ELASTOSIL® R Plus 4070/60 MH is a self-adhesive grade that provides strong adhesion to various plastic substrates (e.g. PA, PBT) and metals, without causing tack formation to the mold. It is an addition-curing, one-component high consistency silicone rubber designed for the manufacturing of molded articles. This product is particularly suitable for applications requiring vibration damping properties.

ELASTOSIL® LR 3675/50 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3675 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. In comparison with ELASTOSIL® LR 3070 grades, the coefficient of friction is reduced by 50-70%. The vulcanizates are noted for their excellent mechanical and electrical properties. Due to the low compression set, there is no need to post-cure finished parts.

SILPURAN® 6610/50 A/B is a paste-like, two-component compound. Its vulcanizates are noted for their significantly reduced tendency towards radical-induced reattachment, i.e., healing, of slit valve surfaces during sterilization by gamma irradiation and e-beam ( 75 kGy). SILPURAN® 6610/50 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

ELASTOSIL® LR 5040/50 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required postcure. Articles made from ELASTOSIL® LR 5040/50 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.

ELASTOSIL® LR 3671/40 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® 3671 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time and good mechanical and electrical properties. The vulcanizates of this product are known for their self-adhesive properties to various substrates as well as their low coefficient of friction.

ELASTOSIL® LR 3072/40 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3072 series. It is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and have good mechanical and electrical properties.

SILMIX® E40 Red is a compound used for fabricating vulcanizates that exhibit a unique combination of characteristics. They are noted for their good flexibility and mechanical properties. SILMIX® E40 Red is specifically designed for fabricating extruded articles. Moreover, post-cured parts made from this compound can be used for food contact applications and are suitable for use under recommendation "XV."

ELASTOSIL® R Plus 4350/55 is a two-component high consistency silicone rubber designed for the manufacture of extruded articles. It utilizes an addition-curing system and offers excellent heat stability. This product is suitable for various applications including household applications, where it can be used for addition curing, food-contact, heat resistance, and high rebound resilience.

ELASTOSIL® R Plus 4305/80 US HCR silicone rubbers are addition-curing, two-part compounds (batch grades). The vulcanizates of these silicone rubbers exhibit excellent transparency and good to very good mechanical properties. ELASTOSIL® R Plus 4305/80 US is specifically designed for the fabrication of extruded articles that require high transparency and very good tear resistance values.

LUMISIL® LR 7601/80 A/B is a liquid silicone rubber from the LUMISIL® LR 7601 series. It is a two-component compound with medium viscosity and fast curing times. The vulcanizates obtained from this material are known for their exceptionally high optical transparency, as well as their outstanding mechanical and electrical properties.

POWERSIL® 740 Light Gray A/B is a paste-like, two-component compound with short curing times. When cured, it forms vulcanizates that exhibit remarkable properties such as high tracking and erosion resistance. The material also demonstrates good mechanical properties, including high tear strength, and exhibits excellent dielectric behavior.

SILMIX® E70 White is a compound used for fabricating vulcanizates that display a unique combination of characteristics. They are recognized for their good flexibility and mechanical properties. SILMIX® E70 White is designed for fabricating extruded articles using high-consistency silicone rubber (HCR). Post-cured parts made from this compound can be used for food contact applications and are suitable for use under recommendation "XV."

ELASTOSIL® LR 5040/20 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required postcure. Articles made from ELASTOSIL® LR 5040/20 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.

POWERSIL® 3525 MH silicone rubber is a one-component, ready-to-use, addition-curing compound that produces an electrically insulating, highly erosion-resistant silicone elastomer upon curing. Compared to conventional silicone rubber, it shows fast curing, with curing time being reduced by 30 to 50% depending on wall thickness and available machinery and runner system. No peroxide decomposition products are released during the curing process.

WACKER® Silicone Paste P is a translucent, vaseline-like paste that has a relatively stiff consistency and provides water repellency. When applied to parts, WACKER® Silicone Paste P offers excellent water repellency, which helps protect against corrosion. The paste also becomes softer when subjected to shear stress or other mechanical stress, such as kneading. This softening effect often makes the processing of the paste easier.

ELASTOSIL® LR 3076/70 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3076 series. It is a paste-like, easily pigmentable, two-component compound with an extremely short curing time and improved oil resistance. Its vulcanizates are noted for their good mechanical and electrical properties.

ELASTOSIL® LR 3066/50 A/B is a liquid silicone rubber from the ELASTOSIL® LR 3066 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. When compared to the ELASTOSIL® LR 3003 grade, the coefficient of friction is reduced by 50-70%. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

POWERSIL® XLR® 630 A/B is a two-component silicone compound with excellent processing properties and low viscosity. It is designed for easy handling and application. The vulcanized rubber exhibits good mechanical properties and excellent dielectric behavior. It is a ready-to-use, two-component system that provides the desired characteristics for various applications.

SILPURAN® 6000/60 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/60 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.