Products

VINNAPAS® CA 5588 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a medium-firm hand is required. The dispersion combines a very high solid content with a low viscosity—a combination that permits the addition of very high filler loadings, resulting in adhesive formulations with high solid contents of 80 percent or even greater. VINNAPAS® CA 5588 is not produced with any added organic solvents, plasticizers, or formaldehyde donors.

ELASTOSIL® E43 Transparent is a self-leveling, one-component acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent mechanical properties and has good adhesion properties to many substrates. In particular, it is used as adhesive on cured silicone rubber.

VINNAPAS® EP 645 is a specially modified vinyl acetate-ethylene (VAE) copolymer dispersion designed to provide excellent adhesion to a wide range of difficult-to-bond substrates. The dispersion is stabilized with polyvinyl alcohol to ensure good wet tack, fast setting speed, and excellent machinability.

HDK® T30Plus is a synthetic, hydrophilic, amorphous silica produced via flame hydrolysis. It is a standard product widely used in various industrial applications. HDK® T30Plus is a white colloidal powder of high purity. It finds applications in inkjet paper, makeup, powder coatings, printing inks, and rheology control.

DEHESIVE® 955 is a solvent-based, addition-crosslinkable, two-component silicone system recommended for release coatings. It offers excellent release stability, excellent anchorage to polyester films, and a good bath life. DEHESIVE® 955 can be used for coating PE-laminated paper, polyester films (PET), and papers.

DEHESIVE® SF 500 is a solvent-free, addition-curing silicone fluid. It is part of a multi-component system. Combined with a crosslinker, platinum catalyst, and others, it is used to apply a release coating on paper and filmic substrates. It is part of a release coating for paper and filmic pressure-sensitive laminates. Examples include uses for single- and double-sided industrial release laminates.

VINNAPAS® SAF 72 is a fine-particle-sized dispersion of a styrene/acrylic acid ester copolymer in water with a solids content of 50%. It is manufactured without using coalescent, organic solvents, plasticizers, or alkyl phenol ethoxylate (APEO)-containing compounds. It exhibits excellent penetration into porous substrates and offers great flexibility.

WACKER® Elastomer 80 N is a hydroxy-functional polydimethyl siloxane polymer. It is a colorless liquid that is not miscible with water. This product is highly recommended for a variety of processing and formulating applications, including sealants, adhesives, coatings, textile softeners, and mold-making products.

VINNAPAS® eco EN 428 is a self-crosslinking, plasticizer-free, aqueous polymer dispersion produced from the monomers vinyl acetate and ethylene. It offers a unique balance of softness, high wet strength, and broad formulation flexibility. The film formed by VINNAPAS® eco EN 428 has a soft texture, making it ideal as a binder for personal hygiene nonwovens. It also serves as a coating and finishing agent for woven and knitted goods, enhancing their performance and appearance.

VINNOL® CE 35 is an aqueous dispersion of a terpolymer consisting of vinyl chloride, vinyl acetate, and ethylene. It acts as a rigid film-forming agent and provides outstanding heat-sealability and high-frequency (HF) weldability to nonwoven and textile substrates. Moreover, it is particularly suitable for producing plasticizer-free coatings that can be heat sealed and high-frequency welded on paper and cardboard surfaces.

Wacker Chemie 3-Chlorobutanone (3-Cl-MEK) is a chlorinated intermediate. It is a colorless to brownish, mobile liquid with a pungent odor. This compound serves as a building block for various heterocycles and is used in the synthesis of pharmaceuticals like sulfamoxole, sulfisoxazole, and sulfoguanole. Additionally, it finds application in the synthesis of pesticides.

VINNAPAS® CEF 52 is a dispersion of a vinyl chloride, ethylene, and vinyl ester terpolymer. It can be used as a binder for coating systems containing an opacifying pigment, such as polymer-modified plasters. The special composition and manufacturing technology mean that VINNAPAS® CEF 52 can be used to formulate very hydrophobic products.

WACKER® AK 100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 100 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It has a high flash point, demonstrating its resistance to ignition. It also exhibits high heat resistance and good solubility in a wide range of solvents.

WACKER® Finish CT 51 L is a solvent-based silicone rubber solution specifically designed for fine coatings on textile substrates. It enables the application of fine coatings with a weight as low as < 5 g/m². This product offers high water columns and low air permeability, resulting in excellent performance. Additionally, it exhibits exceptional layer-to-layer adhesion when multiple coating layers are applied.

WACKER® AK 10 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 10 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits good solubility in a wide range of solvents and minimal changes in physical properties over a broad temperature range.

ELASTOSIL® LR 3005/60 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3005 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.

WACKER® Silazane HMN is a colorless liquid with a strong odor. It is a universal silylating agent used for the derivatization of alcohols, carboxylic acids, amines, amides, mercaptans, etc. It is applicable in chemical production processes in various markets, particularly industrial.

WACKER® Polymer FD 350 is a hydroxyfunctional polydimethylsiloxane polymer. It is a colorless, clear, and odorless liquid that is not miscible with water. It is recommended for use in a variety of processing and formulating applications such as sealants, adhesives, coatings, softeners (textile), and mold-making products.

ELASTOSIL® LR 3846/30 A/B is a considerable oil-bleeding, liquid silicone rubber of the ELASTOSIL® LR 3846 series. It is a paste-like, readily pigmentable, two-component product with a short curing time. Shortly after the curing process, a slight, thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque, have good mechanical and electrical properties, and have very low compression sets.

Wacker Chemie Methyl Acetate (MetAc) 97% is a clear, colorless liquid with a mild, ester-like odor. It is produced continuously, with a capacity of several thousand metric tons per year. It has undergone full registration under REACH. This product serves as a solvent in detergent, adhesive, paint, and coating applications.

WACKER® L 053 is a polyether-functional polydimethylsiloxane that is completely water-soluble. WACKER® L 053 can be used in a wide range of applications, such as the textile industry, polishes, cleaners, and the plastics industry. WACKER® L 053 exhibits both special lubricant properties and antistatic action.

ELASTOSIL® LR 3040/60 A/B is a liquid silicone rubber from the ELASTOSIL® LR 3040 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. They are particularly noted for their high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent).

ELASTOSIL® R 427/30 is a high-strength silicone rubber known for its outstanding transparency, excellent tear strength, and exceptional mechanical properties. It is particularly suitable for the production of extruded profiles. The vulcanizing characteristics of this product allow for short cycle times in the manufacturing of molded articles through compression, transfer, and injection molding processes. Post-cured vulcanizates of this product can be utilized in various applications within the healthcare and food handling industries.

ELASTOSIL® LR 3170/40 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3170 series. It is a paste-like, low-inflammable, two-component compound with an extremely short curing time. The vulcanizates of this product are noted for their excellent mechanical and electrical properties.

WACKER® AK 200 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 200 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits low surface tension, resulting in high surface activity. Additionally, it is chemically highly unreactive and has a low solidifying point.

ELASTOSIL® LR 3003/70 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® E14 Red is a non-sag acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent primerless adhesion to many substrates and outstanding heat stability even in long-term exposure. It meets the physical requirements of MIL-A-46106, Group I, Type I, and Group III, Type I.

ELASTOSIL® LR 3852/50 A/B is a low-oil-bleeding liquid silicone rubber of the ELASTOSIL® LR 3852 series. It is a paste-like, easily pigmentable, two-component product with short curing times and very good demoldability (high hot tear resistance). Shortly after curing, a thin oil film with lubricating properties forms on the surface. The vulcanizates are opaque, have very good mechanical and electrical properties, excellent cut resistance, and a low compression set without post-cure.

SILFOAM® SD 986 is an antifoam solution with a low viscosity that incorporates a small amount of highly viscous silicone fluid. The presence of dimethylpolysiloxane in SILFOAM® SD 986 provides effective defoaming properties in various mineral oil products and non-aqueous systems. This is attributed to its low surface tension and excellent spreading ability, enabling efficient foam control.

DEHESIVE® 908 is a solventless, addition-curing silicone fluid designed for release applications on both paper and filmic substrates. It is an essential component of a multicomponent release coating used in the manufacturing of paper and filmic release liners. These liners play a crucial role in the production of single- and double-sided industrial laminates.

ELASTOSIL® LR 3003/60 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® LR 3040/40 A/B is a liquid silicone rubber from the ELASTOSIL® LR 3040 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. They are particularly noted for their high tear resistance according to DIN ISO 34-1 A (Trousers) and ASTM D 624 B (crescent).

WACKER® E60 350 is a 60% emulsion of medium-viscosity polydimethylsiloxane using a nonionic surfactant system. It has been designed for use in many applications, including automotive care, polishes, industrial release, and textile lubricants. It has been designed to be used in many applications, such as mold release, textile lubricants and softeners, automotive care, and other specialty product applications.

WACKER® AK 10000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 10000 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It possesses good dielectric properties, low surface tension resulting in high surface activity, and it is chemically highly unreactive.

SILFOAM® SD 882 is an anhydrous, low viscosity antifoam agent that has the ability to form a fine dispersion when introduced to water or highly polar systems. Its degree of organomodification allows it to effectively control negative effects such as surface defects and separation tendencies.

ELASTOSIL® A33 Ivory is a moisture-curing silicone rubber (RTV-1) that does not slump and cures at room temperature. It releases an organic amine during the vulcanization process. ELASTOSIL® A33 demonstrates excellent primerless adhesion to a wide range of substrates. This multipurpose grade is suitable for sealing and bonding applications, offering resistance to high temperatures and contact with oil.