Knowde Enhanced TDS
Identification & Functionality
- Fillers Included
- Polymer Name
- Technologies
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Flammability
- Processing Information (Injection Molding)
- Rheological Properties
Value | Units | Test Method / Conditions | |
Tensile Strength (Type 2) | 3.7 | MPa | ISO 37 |
Tear Strength (Method Ba) | 15.0 | kN/m | ISO 34-1 |
Elongation at Break (Type 2) | 250.0 | % | ISO 37 |
Shore Hardness A (15s) | 55.0 | — | ISO 868 |
Tensile Stress at 100% Elongation (Type 2) | 2.4 | MPa | ISO 37 |
Value | Units | Test Method / Conditions | |
Density | 930.0 | kg/m³ | ISO 1183 |
Value | Units | Test Method / Conditions | |
Compression Set (22h, at 70°C, 25%, Type A) | 30.0 | % | ISO 815 |
Compression Set (22h, at 100°C, 25%, Type A) | 37.0 | % | ISO 815 |
Compression Set (72h, at 22°C, 25%, Type A) | 18.0 | % | ISO 815 |
Compression Set (72h, at 125°C, 25%, Type A) | 52.0 | % | ISO 815 |
Value | Units | Test Method / Conditions | |
Service Temperature (depending on load, geometry, etc.) | - 40 to 125 | °C | — |
Moisture Content | max. 0.1 | % | — |
Value | Units | Test Method / Conditions | |
Glow Wire (GWFI, 750°C, 2mm) | Passed | — | DIN EN 60695 |
Fire Behavior FMVSS (2.0 mm) | Passed | — | FMVSS 302/DIN 75200 |
Value | Units | Test Method / Conditions | |
Mould Temperature | <70 | °C | — |
Back Pressure (hydraulic) | min. 3 | bar | — |
Melt Temperature | 215 - 260 | °C | — |
Holding Pressure (of injection pressure) | 50 - 70 | % | — |
Injection Speed | High | — | — |
Value | Units | Test Method / Conditions | |
Spiral Flow (2 mm wall thickness) | 55.0 | cm | — |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
In a dry air (dessiccant) dryer 70-80 °C for 2-4 h
- Technical Data
Storage & Handling
- Storage Conditions
Store in dry, tighlty sealed protected from light not above 30°C.