ALFATER® XL D40I 3EF0010

Identification & Functionality

Fillers Included

Mineral

Polymer Name

PP/EPDM

Technologies

Elastomers

Product Families

Elastomers — Thermoplastic Elastomers

Thermoplastic Vulcanizates (TPV)

Features & Benefits

Labeling Claims

Azo Colorants-free,

Azo Dyes-free,

Conflict minerals-free,

PAH-free,

PFOA-free,

PFOS-free,

Persistent Organic Pollutants (POP)-free

Materials Features

Chemical Resistant,

Excellent Hydrolysis Resistance,

Flexible,

Good Flow,

Good Weather Stability,

Hot Air Resistant,

Ozone Resistant,

Soft,

Superior Surface Quality

Applications & Uses

Markets

Automotive & Transportation,

Consumer Goods,

Electrical & Electronics

Applications

Consumer Goods — Appliances & Electronics

Automotive & Transportation — Automotive

Chassis & Brake,

Exterior & Body,

Interior

Electrical & Electronics — Devices & Assemblies

Consumer Electronics

Consumer Goods — Furniture

Electrical & Electronics — Parts & Components

Sensors & Actuators

Consumer Goods — Sports & Recreation

Compatible Polymers & Resins

Polyethylenes (PE),

Polypropylene Copolymer,

Polypropylenes (PP),

Thermoplastic Elastomers (TPE),

Thermoplastic Polyolefins (TPO),

Thermoplastic Vulcanizates (TPV)

Plastics & Elastomers End Uses

Automotive Applications,

Automotive Exterior Parts,

Automotive Interior Parts,

Cable Ducts,

Casters,

Construction Applications,

Electrical/Electronic Applications,

Furniture,

Handles,

Profiles,

Protective Caps,

Sealing Lip,

Seals,

Shock Absorbers,

Sporting Goods,

Thin-walled Parts

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Color

Black

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Strength (Type 2)	12.0	MPa	ISO 37
Tear Strength (Method Ba)	62.0	kN/m	ISO 34-1
Elongation at Break (Type 2)	500.0	%	ISO 37
Shore Hardness D (15s)	40.0	—	ISO 868
Tensile Stress at 100% Elongation (Type 2)	10.0	MPa	ISO 37

Physical Properties

	Value	Units	Test Method / Conditions
Density	960.0	kg/m³	ISO 1183

Thermal Properties

	Value	Units	Test Method / Conditions
Compression Set (22h, at 70°C, 25%, Type A)	65.0	%	ISO 815
Compression Set (22h, at 100°C, 25%, Type A)	77.0	%	ISO 815
Compression Set (72h, at 22°C, 25%, Type A)	46.0	%	ISO 815
Compression Set (72h, at 125°C, 25%, Type A)	95.0	%	ISO 815

Typical Properties

	Value	Units	Test Method / Conditions
Service Temperature (depending on load, geometry, etc.)	- 40 to 125	°C	—
Moisture Content	max. 0.1	%	—

Processing Information (Injection Molding)

	Value	Units	Test Method / Conditions
Back Pressure (hydraulic)	min. 3	bar	—
Mould Temperature	10 - 70	°C	—
Melt Temperature	195 - 230	°C	—
Holding Pressure (of injection pressure)	50 - 70	%	—
Injection Speed	Middle - High	—	—

Rheological Properties

	Value	Units	Test Method / Conditions
Shrinkage (Lengthwise, 24h)	1.2 - 1.6	%	ISO 294-4
Shrinkage (Lateral, 24h)	0.8 - 1.2	%	ISO 294-4
Spiral Flow (2 mm wall thickness)	65.0	cm	—

Regulatory & Compliance

Certifications & Compliance

Directive 2011/65/EC amended through EU/2015/863 (RoHS),

EC No.1907/2006,

IATF 16949,

ISO 13485,

ISO 14001,

ISO 17025,

ISO 45001,

ISO 50001,

ISO 9001,

REACH (Europe),

REACH (UK),

RoHS Compliant,

SVHC Compliant

Technical Details & Test Data

Pre-Drying Conditions

In a dry air (dessiccant) dryer 70-80 °C for 2-4 h

Storage & Handling

Storage Conditions

Store in dry, protected from light tightly sealed.