Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Processing Information (Injection Molding)
- Rheological Properties
Value | Units | Test Method / Conditions | |
Flexural Modulus (Dry) | 4700.0 | MPa | ISO 178 |
Flexural Strength (Dry) | 170.0 | MPa | ISO 178 |
Tensile Modulus (Dry) | 5300.0 | MPa | ISO 527 |
Tensile Strength (Dry) | 110.0 | MPa | ISO 527 |
Tensile Elongation at Break (Dry) | 4.1 | % | ISO 527 |
Impact Strength (Dry, Charpy, at 23°C) | 65.0 | kJ/m² | ISO 179/1eU |
Impact Strength (Dry, Charpy, at -40°C) | 40.0 | kJ/m² | ISO 179/1eU |
Notched Impact Strength (Dry, Charpy, at 23°C) | 10.0 | kJ/m² | ISO 179/1eA |
Notched Impact (Dry, Charpy, at -40°C) | 6.0 | kJ/m² | ISO 179/1eA |
Value | Units | Test Method / Conditions | |
Density (Dry) | 1220.0 | kg/m³ | ISO 1183 |
Value | Units | Test Method / Conditions | |
HDT / A (Dry, 1.8 MPa) | 201.0 | °C | ISO 75-1/-2 |
DSC (Melt Point, Dry) | 222.0 | °C | ISO 11357 |
Value | Units | Test Method / Conditions | |
Moisture Content | max. 0.15 | % | — |
Value | Units | Test Method / Conditions | |
Melt Temperature | 270 - 290 | °C | — |
Mould Temperature | 80 - 100 | °C | — |
Value | Units | Test Method / Conditions | |
Shrinkage (Lengthwise, 24h) | 0.1 - 0.3 | % | ISO 294-4 |
Shrinkage (Lateral, 24h) | 0.4 - 0.6 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- 80 °C in a dry air (dessiccant) dryer for 2-12 h
- Dependant on moisture content
Storage & Handling
- Storage Conditions
Store in dry, protected from light not above 30°C.