Products

MOCOM Compounds TEDUR® L FC 9510-7 is a polyphenylene sulfide-based polymer containing 40% glass fibers, making it ideal for injection molding due to its high stiffness, easy flow and reduced flash. It is suitable for applications in the machinery, electrical and electronic, and building and construction markets, such as housings and parts in contact with drinking water.

MOCOM Compounds ALTECH® PC-HT A 1000/500 is a high heat polycarbonate with special features that make it suitable for automotive and lighting applications. It should be stored in a dry and protected environment at a temperature not exceeding 30°C. The recommended processing injection molding temperatures are a melt temperature of 320-340°C and a mold temperature of 100-130°C. Typical applications include housings and light switches.

MOCOM Compounds ALTECH® PC A 1000/326 UV is a polycarbonate plastic that is UV stabilized and can be used in a variety of applications. For injection molding, the melt temperature should be between 270-310°C, and the mold temperature should be between 80-110°C.

MOCOM Compounds ALCOM® LB POM 1000 18008 WT1005-18 is a Polyoxymethylene Copolymer with a special filler/additive system that makes it highly reflective and opaque. It is used in Automotive and Lighting market segments for applications such as light guides, reflectors, and light-blocking components. When processed with injection molding, it requires a melt temperature of 190-230°C and a mold temperature of 60-120°C.

MOCOM Compounds ALCOM® CFX ABS+PC 1000 UV 19004 is a modified Acrylonitrile/Butadiene/Styrene/Copolymer with polycarbonate and UV stabilized filler/additive system designed to give a special metallic effect and good flow. It is suitable for injection molding applications in the automotive, building and construction industries, and is used for housing and clothing/fastener applications.

MOCOM Compounds ALCOM® PC 740/4 UV WT1220-05LD is a polycarbonate base polymer with a special filler/additive system that is UV stabilized, translucent, light scattering, and has high light diffusion and easy flow. It is commonly used in the automotive and lighting markets for applications such as lamp covers, display elements, and operating elements and is approved by GM3013 and GS93016. The recommended processing injection molding melt temperature is 270-310°C and the mold temperature is 80-110°C.

MOCOM Compounds ALCOM® PC 740/4 UV WT1310-05LD is a polycarbonate base polymer that contains a special filler/additive system for light scattering, high light transmission, and UV stabilization. It is approved with GS93016 and is suitable for use in automotive and lighting applications such as lamp covers, display elements, and operating elements. For processing injection molding, the recommended temperatures are 270-310°C for melt temperature and 80-110°C for mold temperature. To ensure optimal performance, the product should be stored in a dry, light-protected environment.

MOCOM Compounds ALCOM® PC 740/1.1 CF30 is a polycarbonate base polymer with 30% carbon fibers that has special features of being electrically conductive and having reduced surface resistivity and high stiffness. It is typically used for injection molding parts such as housings and functional components. Its pre-drying conditions are 120°C in a dry air (dessiccant) dryer for 2-4 hours, with a maximum moisture content of 0.02%. The melt temperature for injection molding is between 290-330°C, and the mold temperature is between 80-130°C. The product should be stored in a dry and light-protected environment. It is used in the Machinery market segment and should be handled with care to ensure the highest quality.

MOCOM Compounds ALTECH® PC A 1000/502 UV is a polycarbonate that is easy to flow, UV stabilized, and laser etchable (dark etching). It is suitable for various injection molded parts and applications. For pre-drying, the conditions should be 120°C in a dry air (dessiccant) dryer for 2-3 hours and in an air circulating dryer 100-120°C for 4-12 hours, depending on moisture content, with a maximum moisture content of 0.02%. For processing injection molding, the melt temperature should be 270-310°C and mold temperature should be 80-110°C.

MOCOM Compounds ALTECH® ECO PA66 2035/500 GF35 is a heat-stabilized polyamide 66 with a filler/additive system of 35% glass fibers containing recycled material. It is suitable for use in automotive and other various market segments, such as cooling systems, chassis, steering, and radiator systems. Typical applications include oil pump parts, housing, automotive trim unpainted, oil pans/sumps, and bearing cages.

MOCOM Compounds ALCOM® POM 770/1 SI2 is a heat-stabilized, improved sliding/wear Polyoxymethylene Copolymer with a 2% silicone filler/additive system. It is typically used for bearings and sliding elements, functional components, gear wheels, and roller bearings in the automotive and machinery market segments. For processing injection molding, the melt temperature should be between 180-220°C and the mold temperature should be between 60-120°C. It should be pre-dried in a dry air (desiccant) dryer at 100-110°C for 2-3 hours or an air circulating dryer at 100-110°C for 3-5 hours depending on moisture content.

MOCOM Compounds ALCOM® LD2 PC 1000 UV CC1118-19 is a polycarbonate-based material with a special filler, UV stabilization, high light transmission, light scattering, and high light diffusion, as well as good flow. It is used in the automotive and lighting markets and its typical applications include lamp covers, display elements, and operating elements. This material is approved by GS93016 and is suitable for injection molding with a melt temperature of 270-310°C and a mold temperature of 80-110°C. It should be stored in a dry and light-proof environment.

MOCOM Compounds ALCOM® LB PC 1000 15022 WT1037-15 is a polycarbonate base polymer with a special filler/additive system that features high reflectivity and opacity, as well as easy flow. It is used in automotive and lighting market segments for light guides, reflectors, and light blocking components. For processing injection molding, the melt temperature should be between 280-320°C and the mold temperature should be between 80-110°C. The material should be stored in a cool, dry place to ensure optimal performance.

MOCOM Compounds ALCOM® PC 740/4 GY1281-04LD is a polycarbonate base polymer with a special filler/additive system that provides light scattering, high light transmission, and good flow. It has been approved by GS93016 and is widely used in the automotive and lighting markets for applications such as lamp covers, display elements, and operating elements. Injection molding requires a melt temperature of 270-310°C and a mold temperature of 80-110°C. The product should be stored in a dry, light-protected environment to ensure its quality.

MOCOM Compounds ALTECH® ECO PC 2030/200 GF30 is a polycarbonate base polymer containing 30% glass fibers and recycled material, suitable for applications such as plugs/connectors, housings, and other household goods and energy management. To ensure optimal performance, pre-drying conditions require a dry air (dessiccant) dryer at 100-120°C for 2-3 h, or an air circulating dryer at 100-120°C for 4-12 h depending on moisture content, with a maximum moisture content of <0.02%.

MOCOM Compounds ALTECH® ECO PC 1000/141 FR IM is a polycarbonate base polymer with features like UV stabilization, easy release, flame retardance, and impact modification. It is widely used in injection molded parts such as housings, security engineering parts, sockets, plugs, and connectors for the electrical and electronic and lighting industries.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 15061 CC1104-15 is a polycarbonate-based polymer with a special filler/additive system and UV stabilization. The injection molding processing requires a melt temperature of between 270-310°C and a mold temperature of between 80-110°C. It has excellent light transmission properties, dependent on wall thickness, as well as light scattering and easy flow capabilities. It is used in automotive, lighting, and other applications such as lamp covers, display elements, and operating elements. It has been approved by GS93016 and is suitable for a wide range of applications.

MOCOM Compounds ALCOM® LB ECO PC+ABS 1000 SL WT1023-21 is a pre-dried injection molding grade with a polycarbonate + acrylonitrile butadiene styrene blend. It is highly reflective, contains recycled material, has anti-squeak modifications, and is opaque. It is used in the automotive, electrical and electronic, and lighting markets and is typically used for light guides and reflectors. When processing injection molding, the melt temperature should be 240-280°C and the mold temperature should be 70-100°C.

MOCOM Compounds TEDUR® R 9519 is a special injection molding grade containing 45% glass fibers and recycled material, making it suitable for applications such as fixing elements and lamp sockets. Pre-drying is required in a dry air (desiccant) dryer at 130-140°C for 2-4 hours, depending on the moisture content. During processing, injection molding should be done with a melt temperature of 320-340°C and a mold temperature of at least 140°C.

MOCOM Compounds ALCOM® LB PC+ABS 1000 19037 RD1036-19 is an injection molding grade polymer blend of polycarbonate and Acrylonitrile Butadiene Styrene that is highly reflective and opaque. It is used in automotive, electrical and electronic, and lighting market segments for applications such as light guides and reflectors. During processing injection molding, a melt temperature of 250-280°C and mold temperature of 70-100°C should be maintained. After processing, the material should be stored in a dark environment to protect it from light.

MOCOM Compounds ALCOM® PC 740/2813P.1 CF is a pre-dried polycarbonate featuring 10% carbon fibers, electrically conductive characteristics, reduced surface resistivity, and impact modification. It is typically used for injection molded parts in markets such as machinery and automotive, for applications such as housings and functional components. The recommended melt temperature is between 290-330°C and mold temperature 80-130°C. It should be kept in a dry, light-protected environment with a maximum moisture content of 0.02%. To ensure optimal performance, it is important to store this material in the recommended conditions.

MOCOM Compounds TEDUR® L 9217-1 S is a polyphenylene sulfide base polymer filled with 65% glass fiber/mineral and is used in the automotive, machinery, and lighting market segments. It has special features such as high stiffness, hot oil resistance, and good hydrolysis resistance, and is typically used for highly stressed parts. Pre-drying conditions should be done in a dry air (dessiccant) dryer at 130-140°C for 2-4 hours, depending on the moisture content. Processing injection molding should be done at a melt temperature of 320-340°C and a mold temperature of greater than 140°C.

MOCOM Compounds ALCOM® LDX PC 1000 UV 16069 GY1080-16 is a polycarbonate base polymer filled with a special filler system and UV stabilized. It is translucent, light scattering, and has high light diffusion. This extrusion grade is suitable for use in the lighting market for lamp covers and light transparent components. Processing extrusion should be done at a melt temperature of 240-280°C and it should be stored dry and protected from light.

MOCOM Compounds ALCOM® LB PBT FC 2015 17077 BL1070-17 is a pre-dried polybutylene terephthalate containing 15% glass fibers, special filler, and a blue, opaque color. It is used for light blocking components in electrical and electronic applications. For injection molding, a melt temperature of 250-270°C and a mold temperature of 80-120°C is required. To ensure optimal performance, this product should be protected from light, with a maximum moisture content of <0.02%.

MOCOM Compounds ALCOM® PC 740/4 UV WT1081-08LD2 is a polycarbonate base polymer filled with a special filler, stabilized with UV protection, and featuring special characteristics such as being translucent, light scattering, highly diffusing light, and having good flow. It is commonly used in the automotive and lighting markets for lamp covers, display elements, and operating elements. This polymer is approved according to GS93016 and can be processed by injection molding with melt temperatures of 270-310°C and mold temperatures of 80-110°C.

MOCOM Compounds Alcom® TCD PA6 5070 FR 15021 is a polyamide 6-based polymer with a special filler that makes it thermally conductive, electrically insulating, heat stabilized, and halogen-free flame retardant. It is suitable for a variety of markets such as Automotive, Machinery, electrical and electronic, and Lighting, and is particularly ideal for radiator systems and cooling systems. Typical applications include housings, functional components, plugs/connectors, and lamp sockets.

MOCOM Compounds TEDUR® L 9401-1 is a Polyphenylene Sulfide base polymer containing 40% glass fibers and 5% PTFE. It has improved sliding/wear and high stiffness properties, making it suitable for the Automotive, Machinery, and other market segments. Typical applications include bearings and sliding elements, as well as functional components.

MOCOM Compounds ALCOM® PA66 910/32.1 TCE5 is a polyamide 66 base polymer with a special filler and additive system that provides thermal and electrical conductivity, as well as heat stabilization. It is mainly used for automotive, machinery, electrical and electronic, and lighting applications like electrical components, radiator systems, and cooling systems such as housings and functional components. To ensure optimal performance, it should be pre-dried at 80°C in a dry air (dessiccant) dryer for 2-12 hours, with a maximum moisture content of 0.12%. For injection molding, the melt temperature should be between 300-320°C and the mold temperature should be between 100-130°C.

MOCOM Compounds ALCOM® POM 770/1.1 CF10 is a Polyoxymethylene Copolymer base polymer with 10% carbon fibers as the filler/additive system. It has the special features of being electrically conductive and having reduced surface resistivity, making it a popular choice for injection molded parts such as functional components and bearings in the automotive and machinery market segments.

MOCOM Compounds ALCOM® PC 740/4 UV SV1287-04MCS is a polycarbonate-based material with a UV stabilized filler/additive system that has a metallic effect and easy flow properties. It is typically used for housings and applications such as clothing/fasteners and domestic appliances in the automotive, building and construction market segments.

MOCOM Compounds ALCOM® PC 740/4.2 UV WT1217-10LD3 is a polycarbonate base polymer filled with a special filler that offers light scattering and high light diffusion. It is mainly used in the automotive and lighting industry for applications such as lamp covers, display components, and operating elements. To pre-dry the polymer, it should be kept at 120°C in a dry air (dessiccant) dryer for 2-4 hours, and 120°C in an air circulating dryer for 4-12 hours, ensuring a moisture content of less than 0.02%. For injection molding, the melt temperature should be between 270-310°C and the mold temperature should be between 80-110°C.

MOCOM Compounds ALTECH® ECO PC+ASA 1000/506 is a polycarbonate + Acrylonitrile Styrene Acrylate Blend that has been processing stabilized and contains recycled material. It is suitable for electrical and electronic applications such as sockets, plugs/connectors, and various others. Pre-drying conditions should be followed as in an air circulating dryer at 100-110°C for 3-6 hours, or in a dry air (dessiccant) dryer at 100-110°C for 2-4 hours. For injection molding, the melt temperature should be 250-290°C, and the mold temperature should be 60-100°C. This product should be stored in a cool, dark place to protect it from light.

MOCOM Compounds ALCOM® POM 770/1 PTFE1,5 is a polyoxymethylene copolymer with 1.5% PTFE added as a filler/additive system, designed to improve sliding/wear. It is used in the automotive and machinery market segments for functional components, gear wheels, roller bearings, and sliding elements. For processing injection molding, the recommended melt temperature is 180-220°C and the mold temperature is 60-100°C. The product should be stored in a dry, light-protected environment at a temperature not exceeding 30°C.

MOCOM Compounds ALTECH® PA6 A 1000/320 UV is a Polyamide 6-based polymer with UV stabilization, used for injection molded parts, functional components, and housings. It should be stored in a dry, light-protected environment, not above 30°C. Pre-drying Conditions should be 80°C in a dry air (dessiccant) dryer for 2-12 h, depending on moisture content, with a maximum moisture content of <0.15%. Processing Injection molding should involve a melt temperature of 250-270°C and a mold temperature of 40-80°C. Its target market segments are Automotive, Machinery, Electrical and Electronic, Building and Construction, and Sport and Leisure.

MOCOM Compounds ALCOM® PC 740/1.1 CF20 is a polycarbonate base polymer filled with 20% carbon fibers that is electrically conductive, has reduced surface resistivity, high stiffness, and is heat stabilized. It is suitable for use in machinery and various other market segments, and is typically used in the injection molding of housings, functional components, and protection caps. To ensure optimal performance, pre-drying conditions should be 120°C in a dry air (dessiccant) dryer for 2-4 hours, with a maximum moisture content of <0.02%. The melt temperature for injection molding should be between 290-330°C and the mold temperature should be between 80-130°C.

MOCOM Compounds ALTECH® ECO PA6 1000/586 is a polyamide 6 base polymer with fast solidifying, high impact modified, and high toughness properties. It contains recycled material, and is suitable for applications in the automotive, building and construction, and various market segments. Typical applications include operating elements, housings, cable ties, and various transport systems and energy management components.