Products

PEXIDAN® L/T-UV is a high density PEX system consisting of a silane grafted basecompound A-1001 and a catalyst masterbatch CAT-003 (or A-1022 and CAT-117). When mixed and extruded in the proper proportions, the two-component system results in a material that is crosslinkable by exposure to moisture or by immersion in hot water at 90-95°C. PEXIDAN® L/T is listed by NSF International to standards 14 and 61 and to Canadian Standards Association standard B137.5. NSFI certification to ASTM F876 and ASTM F2023 testifies to its superior resistance to oxidation by hot, chlorinated water. PEXIDAN® L/T is permitted to be used in domestic continuous re-circulation systems and is listed by NSF as a NSF-pw CL5 / PEX 5006 material.

PEXIDAN® HF X/T is a unique low smoke halogen free flame retardant 90°C wet-rated XL-insulation system curable by moisture. It consists of a silane pre-grafted base compound SX651 and a catalyst masterbatch CM540U. Mixed and extruded in the proper proportions (95:5), the two components result in a material that is crosslinkable by exposure to 90°C hot water. PEXIDAN® HF X/T is REACH and RoHS-compliant and is UL 2885 certified to bear the Halogen Free “HF” designation. PEXIDAN® HF X/T is UL-bulletinized and wire made with this insulation system may be marked as Oil Resistant “PR I” and “PR II”, Gas & Oil Resistant “GR I” and “GR II”, “-40C” and “SUNRES” in all colors. This compound will meet a 105°C dry rating.

PEXIDAN® HF SX623 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM540U/1 in the ratio 95:5 or CM540U in the ratio 97:3. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX623 has been designed to meet the requirements of IEC 60092-360 SHF2, BS 7655-2.6 SW4 and EN 50264 sheathing applications.

SACO AEI Polymers THERMODAN® HF 0103-212 NT is a flame retardant non-halogen thermoplastic wire and cable compound. It is designed for use in a variety of jacketing applications. This compound has superior fire performance including slow flame propagation, low smoke production and low smoke corrosivity. THERMODAN® HF 0103-212NT can be used as a jacket compound on cables recognized under UL 1277 tray cables and can pass flame retardant requirements set forth under UL 1685, IEEE 1202 and FT-4. THERMODAN® HF 0103-212 NT is recognized under UL 2885 as being halogen free. It is natural in color and UV resistant.

THERMODAN® HF TP870BU has been developed specially to meet general requirements of BS 7655 Section 6.1 type LTS 1.

THERMODAN® HF TP832NU has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables sheathed with TP832 have received LPCB approval.

THERMODAN® HF TP832 has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables sheathed with TP832 have received LPCB approval.

THERMODAN® HF TP870 has been developed specially to meet general requirements of BS 7655 Section 6.1 type LTS 1.

PEXIDAN® HF SX612S pre-grafted base is mixed with catalyst masterbatch CM602 or CM601, in an addition rate between 5% and 10%, depending on extrusion conditions. This system has ambient cure. PEXIDAN® HF SX612S has been designed to meet the requirements of IEC 60092-351 HF90, EN 50363-5, EI5 type, EN 50525-1 and EN 50525-3-41.

THERMODAN® HF TP837BU has been developed specially to offer good processability, very fast extrusion process with very low die drool.

THERMODAN® TP543CBU2 has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C2 have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.

THERMODAN® HF TP543C2 has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C2 have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.

THERMODAN® HF TP521BU has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP521 have passed the 3m3 smoke density chamber test to IEC 61034-2.

THERMODAN® HF TP 543C has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.

EXTINITY® 0103-202 is a natural, non-halogen flame retardant polyolefin compound. It is designed for use in a wide variety of jacketing applications including wire and cable and tube bundles. This compound has superior fire performance; including slow flame propagation, self-extinguishing characteristics, and low smoke production. EXTINITY® 0103-202 has been formulated to provide excellent long-term thermal and UV stability. EXTINITY® 0103-202 requires no special equipment for processing and is designed to process with ease

PEXIDAN® HF SX407K pre-grafted base is mixed with a crosslinking catalyst masterbatch CM424 in the ratio 95:5. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX407K has been designed to be used in different nuclear power plant radiation resistance cables sheathing with LOCA approval. Different types of cable designs made using SX407 have complied with the following flame tests: - BS 4066 Part 1/IEC 332 Part 1; CEGB GDCD Standard 21; VDE 0472 Pt.804 Method C; VDE 0472 Pt.814; NF C 32- 070 Test 2 (Category C1); BS 4066 Part 3; IEC 332 Part 3 (Categories A, B & C).

THERMODAN® HF TP521 has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP521 have passed the 3m3 smoke density chamber test to IEC 61034-2.

PEXIDAN® HF SX524 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM424 or CM424/1, in the ratio 95:5. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX524 has been developed specially for particularly optical fiber ADSS (all dielectric self-supporting) communication cables to be installed on overhead power distribution networks. The material is black in color and suitable for outdoor use with excellent tracking and UV resistance.

THERMODAN® HF TP832BUT has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables sheathed with TP832 have received LPCB approval.

THERMODAN® HF TP519C has been developed specially to offer good processability, very fast extrusion process with very low die drool.

THERMODAN® HF TP521NU has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP521 have passed the 3m3 smoke density chamber test to IEC 61034-2.

THERMODAN® HF TP835 has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP835 have passed the 3m3 smoke density chamber test to IEC 61034-2.

PEXIDAN® HF SX612ES pre-grafted base is mixed with catalyst masterbatch CM602 or CM601, in an addition rate between 5% and 10%, depending on extrusion conditions. This system has ambient cure. PEXIDAN® HF SX612ES has been designed to meet the requirements of IEC 60092-351 HF90, EN 50363-5, EI5 type, EN 50525-1 and EN 50525-3-41, with enhanced fire resistance to comply with fire testing on smaller cross sections.

THERMODAN® HF TP519CBU has been developed specially to offer good processability, very fast extrusion process with very low die drool.

EXTINITY® 0101-205 is a natural, non-halogen flame retardant RoHS polyolefin compound. It is designed for use in a wide variety of jacketing and coating applications. This compound has superior fire performance; including slow flame propagation, self-extinguishing characteristics, and low smoke production. EXTINITY® 0101-205 should be extruded with a screw configuration designed to optimize process conditions and throughput.

THERMODAN® HF TP812NU has been developed specially to offer good processability, fast extrusion process with very low die drool. TP812 is capable of meeting the flame retardant requirements of UL 1666, UL 1685, IEEE 1202, FT-4 in specific fiber optic constructions. It is also recognized as halogen free under UL 2885. It can be extruded using PVC extruders and screws. It possesses excellent tensile and flame retardant properties and meets the requirements of limited toxic and corrosive fume emission

THERMODAN® HF TP519CB has been developed specially to offer good processability, very fast extrusion process with very low die drool.

THERMODAN® HF TP343NT is a Patent Pending High Performance, Low Smoke Halogen-Free, Thermoplastic Wire and Cable Compound. This compound has superior fire performance, low smoke production and contains no halogens. When used as a jacket for Fiber Optic Cables, TP343NT can assist the cable maker in meeting the stringent new European CPR Regulations at the B2ca Classification (Cable Design Dependant | Actual Results May Vary). THERMODAN® HF TP343NT is natural in color, UV resistant, and is certified Halogen Free by UL to UL2885

THERMODAN® HF TP 543CBT has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.

THERMODAN® HF TP812BU has been developed specially to offer good processability, fast extrusion process with very low die drool. TP812 is capable of meeting the flame retardant requirements of UL 1666, UL 1685, IEEE 1202, FT-4 in specific fiber optic constructions. It is also recognized as halogen free under UL 2885. It can be extruded using PVC extruders and screws. It possesses excellent tensile and flame retardant properties and meets the requirements of limited toxic and corrosive fume emission

THERMODAN® HF 0103-212 BK is a black, non-halogen thermoplastic wire and cable compound. It is designed for use in a wide variety of jacketing applications. This compound has superior fire performance; including slow flame propagation, self-extinguishing characteristics, and low smoke production. It is suitable for use as a jacket compound for cables recognized under UL 1277 tray cables and can pass flame retardant requirements set forth under UL 1685, IEEE 1202 and FT-4. THERMODAN® HF 0103-212 BK is recognized under UL 2885 as being halogen free. It is UV resistant and RoHS compliant.

THERMODAN® HF TP 543CBU has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.

PEXIDAN® HF V/T is a unique low smoke halogen-free flame retardant 90°C wet-rated XL-insulation system curable by moisture. It consists of a silane pre-grafted base compound SX653 and a catalyst masterbatch CM540U. Mixed and extruded in the proper proportions (95:5), the two components result in a material that is cross-linkable by exposure to 90°C hot water. PEXIDAN® HF V/T is REACH and RoHS-compliant. Wire made with PEXIDAN® HF V/T may be marked VW-1, as well as Oil Resistant “PR I” and “PR II”, Gas & Oil Resistant “GR I” and “GR II”, “-40C” and “SUNRES” in all colors.

THERMODAN® HF TP837B has been developed specially to offer good processability, very fast extrusion process with very low die drool.

THERMODAN® HF TP870NU has been developed specially to meet general requirements of BS 7655 Section 6.1 type LTS 1.

THERMODAN® HF TP837NU has been developed specially to offer good processability, very fast extrusion process with very low die drool.