Products

WACKER® AK 200 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 200.000 mm²/s. It is enhanced with a special heat stabilizer that safeguards the silicone fluid from thermal decomposition and viscosity fluctuations. As a result, WACKER® AK 200 000 STAB is particularly well-suited for applications that entail high temperatures and/or shear stress. It exhibits long-term heat stability, making it suitable for operating temperatures exceeding 150 °C, and it demonstrates high shear stability.

SEMICOSIL® 920 LT A/B is a pourable, addition-curing, two-part silicone rubber that cures to a soft silicone gel. It has a 1:1 mixing ratio and exhibits very low viscosity, making it easy to handle and process. This product offers fast curing and forms a soft gel during vulcanization. SEMICOSIL® 920 LT A/B maintains almost constant properties within a wide temperature range, from -100 °C to +200 °C. Additionally, it has a low ion content, ensuring high purity in applications.

WACKER® AK 1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 1000 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits low surface tension, resulting in high surface activity. Additionally, it is chemically highly unreactive and has a low solidifying point.

HELISOL® XA is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 20 mm²/s. Its chemical structure gives it a remarkable set of properties that distinguish it from organic materials like mineral oils. This clear, odorless, and colorless liquid exhibits an outstanding property profile.

WACKER® AK 150 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 150,000 mm²/s. It is enriched with a special heat stabilizer that shields the silicone fluid from thermal decomposition and viscosity fluctuations. As a result, WACKER® AK 150 000 STAB is especially well-suited for applications involving high temperatures and/or shear stress. It is a non-polar liquid with a low solidification point and exhibits good dielectric properties.

ELASTOSIL® SOLAR 1200 is a non-slump, condensation-curing RTV-2 silicone adhesive designed for the solar industry. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® SOLAR 1200 offers excellent long-term stability against weathering, moisture, and UV light. The silicone elastomer can endure constantly changing climatic conditions, UV radiation, and temperatures as high as 180°C (356°F) without damage.

WACKER SilGel® 612 EH A/B is a two-part, pourable, addition-curing RTV-2 silicone rubber. It is a modified version of WACKER SilGel® 612, offering increased hardness and reactivity. With a 1:1 mixing ratio, this product ensures a convenient and precise blending process. It exhibits rapid curing properties and retains a low hardness.

ELASTOSIL® E14 Red is a non-sag acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent primerless adhesion to many substrates and outstanding heat stability even in long-term exposure. It meets the physical requirements of MIL-A-46106, Group I, Type I, and Group III, Type I.

ELASTOSIL® 8510 P is a one-part, neutral-curing, low-modulus silicone sealant with outstanding adhesion properties, a long shelf life, and very good working properties for construction and sanitary applications, especially for sealing natural substrates such as granit or marble. ELASTOSIL® 8510 P cures at room temperature in the presence of atmospheric moisture to give a permanently flexible silicone rubber.

WACKER® AK 100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 100 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It has a high flash point, demonstrating its resistance to ignition. It also exhibits high heat resistance and good solubility in a wide range of solvents.

WACKER® AK 10 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 10 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits good solubility in a wide range of solvents and minimal changes in physical properties over a broad temperature range.

ELASTOSIL® RT 480 is a spreadable, condensation-curing, two-component silicone rubber that vulcanizes at room temperature. It is commonly used in industrial assembly and reproduction molding applications. This silicone rubber exhibits condensation-curing properties, allowing for fast curing at room temperature. It has a spreadable and self-leveling flow, making it easy to work with. ELASTOSIL® RT 480 is a two-component product that provides reliable results in various applications.

ELASTOSIL® E11 Transparent is a flowable silicone rubber with very good mechanical properties that cures at room temperature under the influence of atmospheric moisture. Perfectly suited for lamination, coating, and thin-film potting, the material reliably fills small gaps and voids thanks to its self-leveling properties.

ELASTOSIL® RT 702 White is a non-slump, one-part heat-curing silicone adhesive. The cured material demonstrates very good adhesion to many substrates and long-term stability against weathering, moisture, and UV light. The cured silicone rubber can continuously withstand constantly changing climatic conditions, UV radiation, and temperatures as high as 210°C (410°F) without sustaining damage.

POWERSIL® GEL FC A/B is a pourable, two-component silicone mixture that cures at room temperature to form a soft silicone gel. This product exhibits a very fast curing behavior, allowing for quick processing times. The resulting vulcanizate is transparent and possesses excellent mechanical damping properties, making it suitable for applications requiring vibration absorption. Furthermore, it is a non-bleeding gel, ensuring its stability and reliability.

SILRES® BS 5137 is a highly efficient aqueous and water-dilutable emulsion of reactive polydimethylsiloxane. It is used to provide water repellency to glass wool (fiberglass) or stone wool bound with phenolic resin. It can also be utilized for expanded minerals such as perlite, vermiculite, or expanded clay aggregates.

WACKER® AK 200 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 200 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits low surface tension, resulting in high surface activity. Additionally, it is chemically highly unreactive and has a low solidifying point.

SEMICOSIL® 924 is a pourable, thermally curable, addition-curing one-part silicone rubber that cures to a very soft silicone gel. It is a ready-to-use product, requiring no additional mixing. SEMICOSIL® 924 exhibits thixotropic flow, allowing for easy application. Upon vulcanization, it forms a soft gel. This silicone rubber has low levels of volatiles and uncured polymers, contributing to its high purity. It also boasts a low ion content. SEMICOSIL® 924 maintains almost constant properties within a broad temperature range, from -50 °C to +180 °C.

ELASTOSIL® N 2199 is a one-part, ready-to-use, acid- and solvent-free, non-corrosive RTV-1 non-slumping paste that cures at room temperature to a permanently flexible silicone rubber on exposure to atmospheric moisture. It shows excellent adhesion to a broad variety of substrates.

WACKER® AKF 10000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 10000 mm²/s. Its chemical structure gives it a unique set of special properties that distinguish it from organic materials, such as mineral oils. Notably, WACKER® AKF 10000 stands out for its very low volatile content, high purity, and excellent release properties.

ELASTOSIL® RT 713 is a non-slump, addition-crosslinking, thermal-curing, one-component silicone rubber. It is a ready-to-use, one-part system that offers rapid heat cure. With its low density and low hardness, it provides high compressibility. It is also known for its primerless adhesion to many substrates, making it suitable for general-purpose sealant applications, as well as FIPG and CIPG applications.

WACKER® AK 600000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 600000 mm²/s. Its unique chemical structure gives WACKER® AK 600000 exceptional properties that distinguish it from organic materials like mineral oils. This clear, odorless, and colorless liquid exhibits an outstanding property profile.

ELASTOSIL® RT 607 A/B is a pourable, addition-curing RTV-2 silicone rubber with a two-part formulation and a 9:1 mixing ratio. It has low viscosity and offers rapid heat cure. The cured rubber exhibits high hardness and excellent heat stability. Additionally, it is flame retardant, making it suitable for general purpose encapsulation. This product can also be used as a potting material for electrical coils of lifting magnets and for slot exit potting of electrical coils.

ELASTOSIL® RT 773 is a non-slump, condensation-curing RTV-2 silicone. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 773 offers excellent long-term stability against weathering, moisture, and UV light. The compressible silicone elastomer can continuously endure changing climatic conditions, UV radiation, and temperatures as high as 140°C (284°F) without damage.

ELASTOSIL® E6 N CSC is a flowable one-part silicone rubber for potting or coating applications, and it is particularly suitable for the surface impregnation of porous natural materials. When exposed to air moisture, the product cures at room temperature to yield a permanently flexible silicone rubber with good mechanical and release properties. Fully vulcanized ELASTOSIL® E6 N CSC shows long-term stability against weathering, moisture, and UV radiation. The silicone elastomer may continuously be exposed to constantly changing climatic conditions, UV radiation, and temperatures as high as 180°C without damage.

ELASTOSIL® RT 745 S" A/B" is a pourable, two-part silicone rubber that can be thermally cured. It is an addition-curing type, making it suitable for various applications. Some notable industries where it finds use are automotive, electronics, and measurement and control. Specifically, it is employed in potting and encapsulation processes, ensuring the protection and stability of sensitive components and systems.

WACKER® Primer G 790 Toluene Free is a solution of reactive siloxanes and silanes in an organic solvent. It is specifically formulated to be free of toluene and other aromatic solvents. The primer can be applied directly to the substrate or diluted if desired. As the solvent evaporates and when exposed to ambient humidity, the primer forms a rigid film that firmly adheres to the substrate. By applying a silicone rubber onto the primed substrate and subsequently vulcanizing it, a strong bond is achieved between the silicone rubber and the substrate.

SILRES® BS 1802 is an admixture for the integral waterproofing of fresh concrete in its undiluted form. Additionally, it can be utilized as a water-resisting admixture for non-load-bearing manufactured concrete products. SILRES® BS 1802 effectively prolongs the service life of concrete structures by inhibiting the alkali-silica reaction (ASR).

ELASTOSIL® SOLAR 2203 is a pourable, addition-curing, RTV-2 silicone rubber used for potting, lamination, and encapsulation purposes. The product vulcanizes at room temperature to yield a very soft silicone gel. ELASTOSIL® SOLAR 2203 displays pronounced inherent tack and excellent long-term stability against weathering, moisture, and UV light. The soft silicone gel can continuously withstand changing climatic conditions, UV radiation, and temperatures up to 160°C (320°F) without damage.

ELASTOSIL® AUX G 800 is a solution of reactive siloxanes and silanes in an organic solvent. The primer composition can be applied to the substrate as-is or diluted. During evaporation of the solvent and on exposure to atmospheric humidity at ambient temperature, a rigid primer film is formed that firmly adheres to the substrate. Application of silicone rubber onto the primed substrate and subsequent vulcanization will then result in a tight bond between the silicone rubber and the substrate.

ELASTOSIL N199 TRANSPARENT is a non-slump, neutral-cure silicone sealant that cures at room temperature under the influence of atmospheric moisture. ELASTOSIL® N199 Transparent exhibits excellent primerless adhesion to many substrates with high tear strength. It is a multipurpose adhesive and sealant for the electronics industry, with typical uses for CIPG- and FIPG-applications.

ELASTOSIL® A33 Ivory is a moisture-curing silicone rubber (RTV-1) that does not slump and cures at room temperature. It releases an organic amine during the vulcanization process. ELASTOSIL® A33 demonstrates excellent primerless adhesion to a wide range of substrates. This multipurpose grade is suitable for sealing and bonding applications, offering resistance to high temperatures and contact with oil.

WACKER® AK 10000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 10000 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It possesses good dielectric properties, low surface tension resulting in high surface activity, and it is chemically highly unreactive.

ELASTOSIL® AUX G 3244 is a solvent-based mixture of siloxanes and reactive silanes used as adhesion promoters for silicone rubbers. It is used to pretreat metallic, ceramic, glass, or other polymeric substrate surfaces to enable excellent adhesion towards subsequently vulcanized ELASTOSIL® R solid silicone elastomers (HCR/HTV, peroxide curing).

WACKER® AK 5 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 5 mm²/s. Its chemical structure gives WACKER® AK 5 exceptional properties that distinguish it from organic materials like mineral oils. It is chemically highly unreactive, has a low solidifying point, and exhibits high heat resistance.

SILRES® BS 3003 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Diluted solutions of SILRES® BS 3003 serve as high-quality general-purpose water repellents for impregnating and priming mineral surfaces. It can also be used for the mass treatment of non-load-bearing concrete products and as a post-hydrophobation agent for fiber cement products like fiber cement boards.