Products in Devices & Assemblies: Silicones

ELASTOSIL® A234 White is a flowable RTV-1 silicone rubber that cures at room temperature under the influence of moisture. It shows excellent primerless adhesion to many substrates and offers outstanding heat stability. It is a multipurpose grade for high-temperature applications. Suitable for sealing and bonding, such as the bonding of steam chambers and sole plates of steam irons,

ELASTOSIL® RT 774 is a non-slump, condensation-curing RTV-2 silicone. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 774 offers excellent long-term stability against weathering, moisture, and UV light. The compressible silicone elastomer can continuously endure changing climatic conditions, UV radiation, and temperatures as high as 140°C (284°F) without damage.

ELASTOSIL® RT 702 is a one-part heat-curing silicone adhesive that exhibits non-slump properties. Once cured, ELASTOSIL® RT 702 demonstrates excellent adhesion to a wide range of substrates, along with long-term stability against weathering, moisture, and UV light. The cured silicone rubber can withstand constant exposure to varying climatic conditions, UV radiation, and temperatures up to 250 °C (482 °F) without sustaining any damage.

ELASTOSIL® RT 773 is a non-slump, condensation-curing RTV-2 silicone. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 773 offers excellent long-term stability against weathering, moisture, and UV light. The compressible silicone elastomer can continuously endure changing climatic conditions, UV radiation, and temperatures as high as 140°C (284°F) without damage.

WACKER® AP 500 is a clear, colorless, and odorless polydimethylsiloxane with a high proportion of phenyl groups. It is commonly used as a heat transfer fluid and a pressure transfer fluid. Additionally, it serves as a dielectric in capacitors and transformers as well as a base fluid in heat-resistant lubricants. For practical purposes, the useful temperature range of WACKER® AP 500 is between -35 °C and +200 °C.

ELASTOSIL® N 2034 is a self-leveling, alkoxy-cure, one-component silicone sealant that cures at room temperature under the influence of moisture. It shows excellent primerless adhesion to many substrates. This product is flame retardant and meets the UL 94 V-0 standards.

WACKER® APF 130 STAB is a clear, brown-colored polydimethylsiloxane with a high proportion of phenyl groups. It possesses excellent thermal stability and has a specially designed stabilization system, ensuring its reliability in various applications. With its low volatility, WACKER® APF 130 STAB is particularly well-suited for use as a heat transfer fluid and pressure transfer fluid.

ELASTOSIL® RT 708 is a self-leveling, slightly thixotropic, one-part silicone that cures with heat. It is designed for potting and coating applications and can also be used as a surface adhesive when applied in a thin layer, such as through silk-screen printing. Once cured, ELASTOSIL® RT 708 exhibits excellent adhesion to various substrates and offers long-term stability against weathering, moisture, and UV light. The cured silicone rubber can withstand continuously changing climatic conditions, UV radiation, and temperatures as high as 230 °C (446 °F) without sustaining any damage.

ELASTOSIL® N 2010 is a self-leveling, one-component silicone sealant that cures at room temperature under the influence of moisture. It is a ready-to-use, acid- and solvent-free, non-corrosive RTV-1 (room temperature vulcanizing, 1-component) silicone rubber suitable for many applications. It exhibits good adhesion to plastics and metals, along with elasticity and durability, making it suitable for a wide range of potential uses.

SILRES® K is a solution of a condensation-curing methyl silicone resin in toluene. The product can be used as a binder or as an impregnation agent for porous materials. Besides, SILRES® K is the ideal product for making tack-free prepregs with excellent storage stability. Fully cured SILRES® K has a very low carbon content and thus yields a high ash content when pyrolized. Composites made of SILRES® K show long-term stability against weathering, moisture, and UV light. They can therefore be continuously exposed to constantly changing climatic conditions, UV radiation, and temperatures significantly higher than 300 °C (572 °F). SILRES® K also provides water repellency and excellent electrical insulation properties to the respective composite materials.

ELASTOSIL® RT 706 is a self-leveling, slightly thixotropic, one-part heat-curing silicone used for potting and coating applications. The cured material demonstrates very good adhesion to many substrates and long-term stability against weathering, moisture, and UV light. The cured silicone rubber can continuously withstand constantly changing climatic conditions, UV radiation, and temperatures as high as 230°C (446°F) without sustaining damage.

ELASTOSIL® SC 870 A/B is a two-part silicone rubber designed for creating a thixotropic, addition-curing foam. The foam structure consists primarily of closed cells. This product is particularly well-suited for use with automatic dispensing equipment during processing. Its exceptional rheology allows for the production of CIPG foam gaskets, even in complex 3D geometries.

ELASTOSIL® RT 722 RB A/B is a thixotropic, two-component silicone sealing adhesive that cures to an elastomer through thermal curing. It is specifically designed for various sealing applications. This product is well-suited for use as a sealing adhesive for electronic control units, as well as for FIPG (formed-in-place gasket) applications in plastic and metal housings. It can also be used as a dam material for dam-and-fill applications and for sealing and gasketing of housings.

ELASTOSIL N199 TRANSPARENT is a non-slump, neutral-cure silicone sealant that cures at room temperature under the influence of atmospheric moisture. ELASTOSIL® N199 Transparent exhibits excellent primerless adhesion to many substrates with high tear strength. It is a multipurpose adhesive and sealant for the electronics industry, with typical uses for CIPG- and FIPG-applications.

ELASTOSIL® LR 3003/30 R A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time. Its vulcanizates are noted for their high transparency and excellent mechanical properties.

WACKER SilGel® 612 A/B is a low-viscosity, pourable, addition-curing RTV-2 silicone rubber. This product undergoes vulcanization at room temperature, resulting in the formation of a highly flexible and very soft silicone gel. It boasts a rapid heat curing process, allowing for efficient production times. With its remarkably low hardness, WACKER SilGel® 612 A/B provides the desired silicone gel consistency. Additionally, this silicone rubber offers a crystal-clear appearance.

ELASTOSIL® RT 771 is a self-leveling, condensation-curing RTV-2 silicone adhesive. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 771 offers excellent long-term stability against weathering, moisture, and UV light. The silicone elastomer can continuously withstand changing climatic conditions, UV radiation, and temperatures up to 180°C (356°F) without damage.

SILRES® H62 C is a liquid, solvent-free, one-part heat-curing phenyl silicone resin formulation. The product is ideal for impregnating the electrical coils of motors and generators. Besides, SILRES® H62 C can be used to provide hydrophobic properties to porous materials and as a binder for composites made of fibrous fillers, cloths, and woven or non-woven reinforcing materials. The formulation is ready-to-use and crosslinks under heat. While curing, SILRES® H62 C does not release chemical byproducts, so curing shrinkage is barely noticeable. The product also thermosets in thick layers, even when in contact with air. Fully cured SILRES® H62 C has excellent electrical insulation properties and outstanding long-term heat resistance. Additionally, it shows high stability against weathering, moisture, and UV light and can therefore be continuously exposed to constantly changing climatic conditions or UV radiation.

ELASTOSIL® E43 Transparent is a self-leveling, one-component acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent mechanical properties and has good adhesion properties to many substrates. In particular, it is used as adhesive on cured silicone rubber.

SEMICOSIL® 989/1K is a one-part, ready-to-use silicone rubber that cures through thermal curing. It is non-slumpy and exhibits thixotropic properties, making it easy to handle and apply. This transparent silicone rubber has a medium hardness, providing a balance between flexibility and rigidity. It cures rapidly with heat and offers primerless adhesion to a wide range of substrates.

ELASTOSIL® RT 702 White is a non-slump, one-part heat-curing silicone adhesive. The cured material demonstrates very good adhesion to many substrates and long-term stability against weathering, moisture, and UV light. The cured silicone rubber can continuously withstand constantly changing climatic conditions, UV radiation, and temperatures as high as 210°C (410°F) without sustaining damage.

ELASTOSIL® E47 Transparent is a non-slump, one-component acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows particularly excellent adhesion to cured silicone elastomers. Vulcanization can be accelerated by elevated temperatures (up to 80°C).

ELASTOSIL® N9111 Black is a non-slump, alkoxy-cure, one-part silicone that cures at room temperature under the influence of atmospheric moisture and exhibits excellent adhesion to many substrates. Fully cured ELASTOSIL® N9111 Black has excellent flame retardant properties and shows long-term stability against weathering, moisture, and sunlight.

ELASTOSIL® N288 is a low-viscosity, ready-to-use, neutral crosslinking silicone rubber. It cures at room temperature under the influence of atmospheric moisture. It exhibits excellent heat stability, excellent primerless adhesion to many substrates, permanent temperature exposure up to 200 °C, and peak temperatures up to 250°C.

WACKER SilGel® 612 EH A/B is a two-part, pourable, addition-curing RTV-2 silicone rubber. It is a modified version of WACKER SilGel® 612, offering increased hardness and reactivity. With a 1:1 mixing ratio, this product ensures a convenient and precise blending process. It exhibits rapid curing properties and retains a low hardness.

WACKER® AP 200 is a clear, colorless, and odorless polydimethylsiloxane with a high proportion of phenyl groups. It is commonly used as a heat transfer fluid and a pressure transfer fluid. Additionally, it serves as a dielectric in capacitors and transformers as well as a base fluid in heat-resistant lubricants.

ELASTOSIL® RT 705 is a self-leveling, slightly thixotropic, one-part silicone that cures with heat. It is primarily used for potting and coating applications but can also be used as a surface adhesive when applied in a thin layer, such as by silk-screen printing. Once cured, ELASTOSIL® RT 705 exhibits excellent adhesion to various substrates and demonstrates long-term stability against weathering, moisture, and UV light. The cured silicone rubber can withstand continuously changing climatic conditions, UV radiation, and temperatures as high as 230 °C (446 °F) without sustaining any damage.

ELASTOSIL® A33 Ivory is a moisture-curing silicone rubber (RTV-1) that does not slump and cures at room temperature. It releases an organic amine during the vulcanization process. ELASTOSIL® A33 demonstrates excellent primerless adhesion to a wide range of substrates. This multipurpose grade is suitable for sealing and bonding applications, offering resistance to high temperatures and contact with oil.

WACKER® AP 1000 is a clear, colorless, and odorless polydimethylsiloxane with a high proportion of phenyl groups. It finds application as a heat transfer fluid, a pressure transfer fluid, a dielectric in capacitors and transformers, and as the base fluid for heat-resistant lubricants.

SEMICOSIL® 986/1K is a thermally curable, one-part silicone rubber known for its non-slump properties. It is a ready-to-use system, requiring no additional mixing. The silicone rubber is thixotropic in nature and exhibits a translucent appearance. SEMICOSIL® 986/1K possesses medium hardness and high flexibility, making it suitable as a low-stress adhesive. It offers primerless adhesion to various substrates. Furthermore, this silicone rubber undergoes rapid heat curing and features ultraviolet fluorescence properties.

ELASTOSIL® N9111 White is a non-slump, non-corossive, alkoxy-cure, one-component silicone that cures at room temperature under the influence of atmospheric moisture. It is a multipurpose sealant and adhesive for the appliance, automotive, and electronics industries. Due to its shear-thinning nature, ELASTOSIL® N9111 White is easy to apply. The material starts curing upon contact with air humidity.

SEMICOSIL® 911 A/B is a pourable, two-part silicone rubber that cures to a soft silicone gel through addition-curing. It has a 1:1 mixing ratio and demonstrates thixotropic behavior. This product offers rapid heat curing and forms a soft gel during vulcanization. SEMICOSIL® 911 A/B has a low volatile and uncured polymer content. It maintains almost constant properties within a wide temperature range, from -40 °C to +180 °C. Additionally, it boasts a low ion content.

ELASTOSIL® RT 778 is a non-slump, condensation-curing RTV-2 silicone adhesive. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 778 offers excellent long-term stability against weathering, moisture, and UV light. The silicone elastomer can continuously endure changing climatic conditions, UV radiation, and temperatures up to 250°C (482°F) without damage.

ELASTOSIL® N189 Black is a non-slump, neutral-cure silicone sealant that cures at room temperature under the influence of atmospheric moisture. It exhibits excellent primerless adhesion to many substrates and has good resistance to mineral oil and coolants. Additionally, it shows excellent heat stability.

SEMICOSIL® 9242 is a pourable, thermally curable, addition-curing one-part silicone rubber that cures to a very soft silicone gel. This product is ready-to-use, requiring no additional mixing. It exhibits thixotropic behavior, meaning it becomes shear-thinning during application. SEMICOSIL® 9242 offers rapid heat curing, allowing for efficient processing. Upon vulcanization, it forms a soft gel. With low levels of volatiles, uncured polymers, and ions, this silicone rubber ensures high purity. Additionally, SEMICOSIL® 9242 has the additional feature of ultraviolet fluorescence.

ELASTOSIL® RT 745 S" A/B" is a pourable, two-part silicone rubber that can be thermally cured. It is an addition-curing type, making it suitable for various applications. Some notable industries where it finds use are automotive, electronics, and measurement and control. Specifically, it is employed in potting and encapsulation processes, ensuring the protection and stability of sensitive components and systems.