Products

DMPA® Dimethylolpropionic Acid is a unique and versatile hindered diol molecule with both hydroxyl and carboxyl functionality.

Bisomer® PEG200DMA is a low viscosity aliphatic dimethacrylate monomer ideally used as a co-monomer for improving mechanical properties and chemical resistance.

DMPA® Polyol HC-0123 in Water Soluble Urethane & Polyester Resins.

TRI-REZ® Polyol 1030-60 is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® Polyol 1030- 60 makes it an ideal polyol for formulating high solids and waterborne polyurethane resins.

Bisomer® BDDMA (1,4 Butanediol Dimethacrylate) is a low viscosity, low odor dimethacrylate monomer.

Bisomer® MPEG350MA is a long chain methacrylate monoester based on an ethylene oxide backbone.

Bisomer® PPM5 LI is a hydroxyl functional methacrylate monomer.

DMPA® Polyol HA-0135 is a linear polyester polyol that contains both hydroxyl and acid functionality. The structure of DMPA® Polyol HA-0135 has been specifically designed to achieve maximum hydrolytic stability in water-borne applications. DMPA® Polyol HA-0135 can be used to formulate high solids and NMP free polyurethane dispersions.

Bisomer® TEGDMA (Triethyleneglycol Dimethacrylate).

Bisomer® LMA (Lauryl Methacrylate) is a hydrophobic methacrylate monomer.

Bisomer® BZMA (Benzyl Methacrylate) is a low viscosity mono-functional monomer suitable for a wide range of applications.

TRI-REZ® Polyol 1230-60 is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® Polyol 1230- 60 makes it an ideal polyol for formulating high solids and waterborne polyurethane resins.

Bisomer® S20W is an aqueous solution of a long chain methacrylate monoester based on a polyethylene glycol backbone.

TRI-REZ® 1220A-300 is a 100% solids highly branched saturated polyester polyol based on TRIMET® TME (Trimethylolethane). The highly branched structure of TRI-REZ® Polyol 1220A-300 makes it an ideal choice for formulating two component, high solids polyurethane coatings and elastomers that require excellent UV and chemical resistance properties.

Bisomer® LMA97 SP is a hydrophobic methacrylate monomer.

Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses.

Bisomer® PEA6 is a hydroxyl functional methacrylate monomer.

Bisomer® EP100DMA is the dimethacrylate ester of a specifically designed block polyalkylene glycol.

Bisomer® MPEG550MA is a long chain methacrylate monoester based on an ethylene oxide backbone.

Bisomer® HEMA (Hydroxyethyl Methacrylate) is a hydroxyl functional methacrylate monomer.

DMPA® Polyol HA-0135 LV2 is a low crystalline polyester polyol with both acid and hydroxyl functionality. Like DMPA® Polyol HA-0135, this resin is designed to eliminate the need for NMP as a processing solvent in the manufacturing of polyurethane dispersions.

Bisomer® PPM5 HI is a Polypropyleneglycol Monmethoacrylate.

Bisomer® PPA6 is a hydroxyl functional acrylate monomer.

TRI-REZ® Polyol 1230-90 is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® Polyol 1230- 90 makes it an ideal polyol for formulating high solids and waterborne polyurethane resins.

Bisomer® PEM6 LD is a hydroxyl functional methacrylate monomer.

Bisomer® HPMA (Hydroxpropyl Methacrylate) is a hydroxyl functional methacrylate monomer.

Bisomer® IDMA (Isodecyl Methacrylate).

Bisomer® PTE (Paratoluidine Ethoxylate) is an amine accelerator for peroxide cure formulations.

TRIMET® TME is a tri-functional polyol with a compact neo-pentyl structure. It is available in two grades, Technical and Pure and in two forms, cake resistant briquettes and granular. Pure grade is only available in granular form. Owing to the properties associated with its neo-pentyl structure and functionality, TRIMET® TME is considered to be a high quality polyol that can improve performance in a variety of applications.

Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses.

TRI-REZ® Polyol 1030-90 is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® Polyol 1030- 90 makes it an ideal polyol for formulating high solids and waterborne polyurethane resins.

Bisomer® S10W is an aqueous solution of a long chain methacrylate monoester based on a polyethylene glycol backbone.

Bisomer® EP150DMA is a dimethacrylate ester of a specifically designed block polyalkylene glycol which has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems.

Bisomer® Amine D700 (77% aqueous dimethylamino hydroxypropane solution) is a multifunctional amino alcohol additive.

Bisomer® PEM63P HD is a hydroxyl functional methacrylate monomer.

DICAP® 2020 is a Acid Functional Saturated Polyester Polyol.