Knowde Enhanced TDS
Identification & Functionality
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Use Level
- 3 %
- Dosage and Dosage Conditions
- Extrusion : 3 %
- Injection Molding : 3%
- Dependant on wall thickness and required color intensity
- Dependant on application and operational area
Properties
- Color
- Physical Form
- Physical Properties
- Thermal Properties
- Typical Properties
- Processing Information (Injection Molding)
- Rheological Properties
| Value | Units | Test Method / Conditions | |
| Density | 1310.0 | kg/m³ | ISO 1183 |
| Value | Units | Test Method / Conditions | |
| DSC (Melt Point) | 224.0 | °C | ISO 11357 |
| Value | Units | Test Method / Conditions | |
| Light Fastness Colourant | Blue Woolscale 8 | — | — |
| Thermal Stability Colourant | max. 300 | °C | — |
| Moisture Content | max. 0.04 | % | — |
| Value | Units | Test Method / Conditions | |
| Melt Temperature | 250 - 270 | °C | — |
| Mould Temperature | 60 - 100 | °C | — |
| Value | Units | Test Method / Conditions | |
| Melt Index (MVR) | 35.0 | cm³/10min | ISO 1133 |
| MVR Temperature | 250.0 | °C | — |
| MVR Load | 2.16 | kg | — |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- In a dry air (dessiccant) dryer 100-120 °C for 2-4 h
- In an air circulatIng dryer 100-120 °C for 4-8 h
Storage & Handling
- Storage Conditions
Store in dry, protected from light tightly sealed.