Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Labeling Claims
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Electrical Properties
- Processing Information (Injection Molding)
- Rheological Properties
Value | Units | Test Method / Conditions | |
Flexural Modulus | 14100.0 | MPa | ISO 178 |
Flexural Strength | 210.0 | MPa | ISO 178 |
Tensile Modulus | 16200.0 | MPa | ISO 527 |
Tensile Strength at Break | 140.0 | MPa | ISO 527 |
Tensile Elongation at Break | 1.6 | % | ISO 527 |
Impact Strength (Charpy, at 23°C) | 37.0 | kJ/m² | ISO 179/1eU |
Notched Impact Strength (Charpy, at 23°C) | 6.0 | kJ/m² | ISO 179/1eA |
Value | Units | Test Method / Conditions | |
Density | 1470.0 | kg/m³ | ISO 1183 |
Value | Units | Test Method / Conditions | |
Vicat B50 | 210.0 | °C | ISO 306 |
HDT / A (1.8 MPa) | 217.0 | °C | ISO 75-1/-2 |
Value | Units | Test Method / Conditions | |
Surface Resistance | max. 25 | Ohm | IEC 62631-3-2 |
Value | Units | Test Method / Conditions | |
Melt Temperature | 250 - 270 | °C | — |
Mould Temperature | 80 - 120 | °C | — |
Value | Units | Test Method / Conditions | |
Shrinkage (Lengthwise, 24h) | 0.2 - 0.4 | % | ISO 294-4 |
Shrinkage (Lateral, 24h) | 0.7 - 1.1 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- In a dry air (dessiccant) dryer 100-120 °C for 2-4 h
- In an air circulatIng dryer 100-120 °C for 4-8 h
- Dependant on moisture content
Storage & Handling
- Storage Conditions
Store in dry, protected from light.