Knowde Enhanced TDS
Identification & Functionality
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Processing Information (Injection Molding)
- Tribological Properties
- Rheological Properties
Value | Units | Test Method / Conditions | |
Flexural Modulus | 2200.0 | MPa | ISO 178 |
Flexural Stress (3.5% Strain) | 60.0 | MPa | ISO 178 |
Tensile Modulus | 2250.0 | MPa | ISO 527 |
Tensile Strength | 50.0 | MPa | ISO 527 |
Tensile Elongation at Break | 13.0 | % | ISO 527 |
Impact Strength (Charpy, at 23°C) | 50.0 | kJ/m² | ISO 179/1eU |
Impact Strength (Charpy, at -40°C) | 50.0 | kJ/m² | ISO 179/1eU |
Notched Impact Strength (Charpy, at 23°C) | 4.5 | kJ/m² | ISO 179/1eA |
Notched Impact (Charpy, at -40°C) | 3.5 | kJ/m² | ISO 179/1eA |
Value | Units | Test Method / Conditions | |
Density | 1480.0 | kg/m³ | ISO 1183 |
Value | Units | Test Method / Conditions | |
Vicat B50 | 145.0 | °C | ISO 306 |
HDT / A (1.8 MPa) | 90.0 | °C | ISO 75-1/-2 |
DSC (Melt Point) | 173.0 | °C | ISO 11357 |
Value | Units | Test Method / Conditions | |
Melt Temperature | 180 - 220 | °C | — |
Mould Temperature | 60 - 100 | °C | — |
Value | Units | Test Method / Conditions | |
Coefficient of Sliding Friction µ (pv = 5*1 MPa*m/s) | 0.25 | — | ASTM G 137 |
Coefficient of Sliding Friction µH (pv = 5*1 MPa*m/s) | 0.16 | — | ASTM G 137 |
Specific Wear Rate ws (pv = 5*1 MPa*m/s) | 0.5 | E⁻⁶ mm³/Nm | ASTM G 137 |
Linear Wear Rate w (pv = 5*1 MPa*m/s) | 9.0 | µm/h | ASTM G 137 |
Value | Units | Test Method / Conditions | |
Melt Index (MVR) | 6.0 | cm³/10min | ISO 1133 |
MVR Temperature | 190.0 | °C | — |
MVR Load | 2.16 | kg | — |
Shrinkage (Lengthwise, 24h) | 2 - 2.4 | % | ISO 294-4 |
Shrinkage (Lateral, 24h) | 1.9 - 2.3 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- In a dry air (dessiccant) dryer 100-110 °C for 2-3 h
- In an air circulatIng dryer 100-110 °C for 3-5 h Dependant on moisture content
Storage & Handling
- Storage Conditions
Store in dry, protected from light not above 30°C.