Products

ELASTOSIL® N9111 White is a non-slump, non-corossive, alkoxy-cure, one-component silicone that cures at room temperature under the influence of atmospheric moisture. It is a multipurpose sealant and adhesive for the appliance, automotive, and electronics industries. Due to its shear-thinning nature, ELASTOSIL® N9111 White is easy to apply. The material starts curing upon contact with air humidity.

ELASTOSIL® SOLAR 3210 A/B is a pourable addition-curing RTV-2 silicone rubber specifically designed for coating, lamination, encapsulation, and molding applications. This product undergoes vulcanization at both room temperature and under heat, resulting in a transparent silicone rubber with excellent transmission properties and a moderate hardness. Cured ELASTOSIL® SOLAR 3210 A/B exhibits exceptional long-term stability against weathering, moisture, and UV light. It can withstand constantly changing climatic conditions, UV radiation, and temperatures up to 180 °C (356 °F) without any damage to the silicone elastomer.

ELASTOSIL® N294 is a free-flowing, ready-to-use silicone rubber that vulcanizes either at room temperature or at high temperatures under the influence of atmospheric moisture. ELASTOSIL® N294 is available in blue and red colors. It is particularly suited for screen printing.

WACKER® RTV-S 691 A/B is a self-leveling, two-part addition-curing silicone rubber that can be vulcanized at room temperature. It is particularly recommended for space applications due to its low outgassing rate and low temperature flexibility. This product has been specifically designed and used as an adhesive for solar cells on solar generators in space applications, including satellites.

ELASTOSIL® RT 628 A/B is a flowable, addition-curing, 2-part silicone rubber designed for potting, encapsulation, and casting applications. This product vulcanizes at room temperature or under heat, resulting in a permanently flexible silicone rubber featuring excellent mechanical properties. Once cured, ELASTOSIL® RT 628 A/B exhibits exceptional long-term stability against weathering, moisture, and UV radiation. The silicone elastomer can withstand constant exposure to ever-changing climatic conditions, UV radiation, and temperatures as high as 180°C (356°F) without sustaining damage.

ELASTOSIL® E43 N Transparent is a one-part, non-slump, self-leveling silicone adhesive. When exposed to air moisture, it cures at room temperature to yield a permanently flexible silicone rubber with very good mechanical properties. Fully cured ELASTOSIL® E43 N Transparent shows long-term stability against weathering, moisture, and UV radiation. The silicone elastomer may continuously be exposed to constantly changing climatic conditions, UV radiation, and temperatures as high as 180 °C without damage.

SEMICOSIL® 942 UV A/B is a sprayable, addition-curing, two-part silicone rubber with low viscosity. This product cures extremely fast when exposed to UV light, resulting in a soft conformal coating. SEMICOSIL® 942 UV A/B exhibits low viscosity and shear-thinning properties, making it suitable for spray applications. It offers the advantage of extremely fast curing at room temperature after UV activation, as well as the ability for shadow curing. Additionally, it contains a UV tracer, providing process control options during application.

POWERSIL® Insulator Finish is a self-leveling, one-component silicone rubber that cures at room temperature under the influence of moisture in the air. This elastomer exhibits good mechanical properties and very good electrical properties, making it suitable for insulating applications. It utilizes an acetic acid-curing system and demonstrates excellent resistance to weathering and air pollution.

DEHESIVE® PSA 847 M is a solvent-free, addition-curing silicone pressure-sensitive adhesive designed for tight adhesion levels. It serves as a general-purpose adhesive, primarily intended for coating films but also suitable for other substrates. This product utilizes a thermal-curing system and achieves curing at a web temperature range of 90-200 °C.

SILPURAN® 2122 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive with high adhesive strength. It belongs to the silicone gel category. SILPURAN® 2122 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.

ELASTOSIL® RT 625 A/B is a pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. It is specifically designed for electronics reproduction molding applications. This product offers excellent mechanical properties and is flowable in nature. It is a two-component system that provides high-quality reproduction molding results.

ELASTOSIL® RT 622 A/B is a pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. It is a flowable material and requires a two-component mixing process for curing. This product is specifically designed for applications in electronics encapsulation and hydroelectric power plants.

DEHESIVE® PSA 820 L is a solvent-free, addition-curing silicone pressure-sensitive adhesive designed for low adhesion levels. It serves as a general-purpose adhesive, primarily intended for coating films but also suitable for other substrates. This product utilizes a thermal-curing system and achieves curing at a web temperature range of 100-200 °C.

WACKER® GM - Glazing and Metal is a one-part, neutral-curing, low modulus silicone sealant with excellent adhesion and a long shelf life. It is designed for sealing, bonding, and repairing various tasks. WACKER® GM - Glazing and Metal cures at room temperature when exposed to atmospheric moisture, forming a durable and flexible silicone rubber.

SEMICOSIL® 949 UV A/B is a pourable, addition-curing, two-part silicone rubber with low viscosity. This product cures extremely fast when exposed to UV light, resulting in a soft silicone elastomer. SEMICOSIL® 949 UV A has a mixing ratio of 10:1 for its two parts and exhibits low viscosity, making it easy to handle and process. It offers the advantage of extremely fast curing at room temperature after UV activation. The cured elastomer has low hardness (Shore 00). Additionally, SEMICOSIL® 949 UV A contains a UV tracer, providing process control options during application.

VINNAPAS® UW 2 FS is a solid, thermoplastic homopolymer. The resin is clear, colorless, and tasteless, and it is produced by polymerizing vinyl acetate. This versatile product finds typical applications in fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.

ELASTOSIL® RT 703 is a self-leveling, slightly thixotropic, one-part heat-curing silicone adhesive. It can also be used for surface printing purposes when applied by serigraphy. Cured ELASTOSIL® RT 703 displays excellent adhesion to various substrates and long-term stability against weathering, moisture, and UV light. The cured silicone rubber can continuously withstand changing climatic conditions, UV radiation, and temperatures as high as 200°C (392°F) without damage.

SILPURAN® 4200 is a non-slump, self-leveling silicone rubber formulation that cures at room temperature under the influence of atmospheric moisture to a silicone elastomer exhibiting good mechanical properties. SILPURAN® 4200 is designed for medical applications in compliance with Wacker Silicones' health care policy.

SILPURAN® 2114 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive with high adhesive strength. It belongs to the silicone gel category. SILPURAN® 2114 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.

ELASTOSIL® N 2137 is a non-slump, one-part silicone rubber for sealing and bonding applications. When exposed to air moisture, it cures at room temperature to yield a permanently flexible silicone rubber with excellent heat resistance. Fully vulcanized ELASTOSIL® N 2137 shows long-term stability against weathering, moisture, and UV radiation. The silicone elastomer may continuously be exposed to constantly changing climatic conditions, UV radiation, and temperatures as high as 180 °C (356 °F) without damage.

WACKER® 121 - Aquarium is a high-quality silicone sealant specifically formulated for the construction of aquariums and various industrial applications. This one-part, acid-curing sealant offers excellent mechanical properties and a high curing rate. When exposed to atmospheric moisture at room temperature, WACKER® 121 - Aquarium undergoes curing, resulting in a permanently flexible silicone rubber.

SILPURAN® 2100 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive. It belongs to the silicone gel category. SILPURAN® 2100 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.

ELASTOSIL® RT 624 A/B is a pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. It is commonly used for bonding and sealing applications as well as for creating cured-in-place gaskets of the dry type. This product is known for its high tear resistance and long pot life at ambient temperature.

ELASTOSIL® E60 N Grey is a flowable, one-part silicone rubber for potting and coating applications. When exposed to air moisture, it cures at room temperature to yield a permanently flexible silicone rubber with excellent heat resistance. Fully vulcanized ELASTOSIL® E60 N Grey shows long-term stability against weathering, moisture, and UV radiation. The silicone elastomer may continuously be exposed to constantly changing climatic conditions, UV radiation, and temperatures as high as 230°C without damage.

ELASTOSIL® E50 N Transparent is a flowable, one-part silicone rubber for potting, coating, or sealing applications. When exposed to air moisture, it cures at room temperature to yield a permanently flexible silicone rubber with very good mechanical properties. Fully vulcanized ELASTOSIL® E50 N Transparent shows long-term stability against weathering, moisture, and UV radiation. The silicone elastomer may continuously be exposed to constantly changing climatic conditions, UV radiation, and temperatures as high as 180°C without damage.

SILPURAN® 2112 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive. It belongs to the silicone gel category. SILPURAN® 2112 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.

GENIOSIL® WP 1 is a polyether-based silane-terminated polymer suitable as a binder in moisture-curing formulations. It differs from conventional silylated polymers due to its high reactivity, which results from the structural proximity of the nitrogen atom to the silicon atom in the dimethoxy(methyl)silyl-methylcarbamate group (alpha-effect). It hydrolyzes in the presence of moisture to form a stable siloxane network initiated by mild catalysis, rather than heavy metal ions.

DEHESIVE® PSA 815 UT is a solvent-free, addition-curing silicone pressure-sensitive adhesive designed for ultra-tight adhesion levels. It serves as a general-purpose adhesive, primarily intended for coating films but also suitable for other substrates. This product utilizes a thermal-curing system and achieves curing at a web temperature range of 90-200 °C.

DEHESIVE® PSA 846 L is a solvent-free, addition-curing silicone pressure-sensitive adhesive designed for low adhesion levels. It serves as a general-purpose adhesive, primarily intended for coating films but also suitable for other substrates. This product utilizes a thermal-curing system and achieves curing at a web temperature range of 90-200 °C.

DEHESIVE® PSA 630 T is a solvent-based silicone pressure-sensitive adhesive intended particularly for coating films but also other substrates. It can be used for coating several film substrates, such as polyester, polyamide, polyimide, and other substrates, for the manufacture of different silicone pressure-sensitive adhesive tapes and other articles.

WACKER® 130 - Glass and Glazing is a high-quality silicone sealant specifically designed for glazing and window sealing applications. This one-component, acid-curing sealant offers exceptional adhesion on glass and aluminum surfaces, along with a long shelf life and excellent processing properties. When exposed to atmospheric moisture at room temperature, WACKER® 130 Glass and Glazing undergoes curing, transforming into a permanently flexible silicone rubber.

DEHESIVE® PSA 845 T is a solvent-free, addition-curing silicone pressure-sensitive adhesive designed for tight adhesion levels. It serves as a general-purpose adhesive, primarily intended for coating films but also suitable for other substrates. This product utilizes a thermal-curing system and achieves curing at a web temperature range of 90-200 °C.

VINNAPAS® UW 25 FS is a solid, thermoplastic homopolymer. This clear and colorless resin is produced through the polymerization of vinyl acetate. It is tasteless and finds application in building and construction adhesives, as well as resin modification for composites. The product is available in the form of solid, colorless beads that are odorless and tasteless.

DEHESIVE® PSA 765 KR is a solvent-free, addition-curing silicone pressure-sensitive adhesive designed for low adhesion levels. It serves as a general-purpose adhesive, primarily intended for coating films but also suitable for other substrates. This product utilizes a thermal-curing system and achieves curing at a web temperature range of 100-200 °C.

ELASTOSIL® S 692 A/B is a self-leveling, electrically conductive, addition-curing two-component silicone rubber that can be cured at room temperature or at high temperatures. It is recommended for space applications due to its low outgassing rate and low-temperature flexibility. ELASTOSIL® S 692 A/B has been developed and designed as an ablative adhesive to prevent static electrical charging effects on solar generators for space applications, such as satellites.

WACKER® 180 - High Temperature is a high-performance silicone sealant designed for applications requiring excellent heat resistance and capable of withstanding temperatures up to 250°C. This one-part acetoxy sealant cures at room temperature when exposed to atmospheric moisture, resulting in a permanently flexible silicone rubber.