Products

ELASTOSIL® 4100 is a one-component, acid-curing, low-modulus silicone sealant with outstanding adhesion and a long shelf life for construction, glazing, and window applications, as well as sanitary applications. It cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber.

ELASTOSIL® R Plus 4305/70 is a two-component, high-consistency silicone rubber specifically developed for the manufacture of extruded articles. Cured articles made from this addition-curing rubber exhibit excellent transparency and demonstrate good to very good mechanical properties. This fast-curing silicone rubber displays good to very good mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-curing materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.

ELASTOSIL® E209 is a one-component silicone rubber with low viscosity that cures at room temperature under the influence of atmospheric humidity. It has a flowable consistency and utilizes an acetoxy-cure mechanism. ELASTOSIL E209 demonstrates good primerless adhesion to a variety of substrates. For optimal results in specific applications, it is recommended to conduct preliminary tests to optimize the conditions.

POWERSIL® 740 Light Gray A/B is a paste-like, two-component compound with short curing times. When cured, it forms vulcanizates that exhibit remarkable properties such as high tracking and erosion resistance. The material also demonstrates good mechanical properties, including high tear strength, and exhibits excellent dielectric behavior.

POWERSIL® 732 CS A/B is a two-component, liquid silicone rubber that offers excellent processing properties. The resulting vulcanizates exhibit exceptional mechanical and electrical properties. This product is specifically designed for cold-shrink applications and provides excellent dielectric properties. It is highly suitable for outdoor applications, offering UV and weathering resistance as well as excellent hydrophobic properties.

POWERSIL® 3525 MH silicone rubber is a one-component, ready-to-use, addition-curing compound that produces an electrically insulating, highly erosion-resistant silicone elastomer upon curing. Compared to conventional silicone rubber, it shows fast curing, with curing time being reduced by 30 to 50% depending on wall thickness and available machinery and runner system. No peroxide decomposition products are released during the curing process.

ELASTOSIL® 4000 is a one-component, acid-curing, low-modulus silicone sealant with outstanding adhesion and a long shelf life for construction, glazing, and window applications, as well as industrial applications. It cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber.

POWERSIL® XLR® 630 A/B is a two-component silicone compound with excellent processing properties and low viscosity. It is designed for easy handling and application. The vulcanized rubber exhibits good mechanical properties and excellent dielectric behavior. It is a ready-to-use, two-component system that provides the desired characteristics for various applications.

WACKER® Primer G 790 Toluene Free is a solution of reactive siloxanes and silanes in an organic solvent. It is specifically formulated to be free of toluene and other aromatic solvents. The primer can be applied directly to the substrate or diluted if desired. As the solvent evaporates and when exposed to ambient humidity, the primer forms a rigid film that firmly adheres to the substrate. By applying a silicone rubber onto the primed substrate and subsequently vulcanizing it, a strong bond is achieved between the silicone rubber and the substrate.

WACKER® Silicone Paste P 250 is an opaque paste with a medium consistency and slight thixotropic properties. It possesses good electrical properties, including insulation, relative permittivity, and electric strength. Additionally, it exhibits strong adhesion to metals and ceramic materials. When applied as a coating, WACKER® Silicone Paste P 250 provides excellent water repellency, offering a certain level of protection against corrosion. The paste's low viscosity makes it easy to use as an embedding compound, release agent, or lubricant in various applications.

POWERSIL® 3100 MH silicone rubber is a one-component, addition-curing compound that is ready to use and cures to an electrically insulating, highly erosion-resistant silicone elastomer. This product offers comparatively fast curing times compared to conventional silicone rubber, reducing cure times by 30-50%, depending on the wall thickness of the application, as well as the available machinery and runner system. Furthermore, no peroxide decomposition products are released during the curing process, reducing any potential hazards. The curing system also eliminates the risk of curing inhibition by oxygen.

ELASTOSIL® R Plus 5305/70 is a platinum-catalyzed, addition-curing, two-part silicone rubber specifically designed for the manufacturing of extruded articles. Cured articles exhibit excellent transparency and very good mechanical properties. This silicone rubber is suitable for applications such as ignition and battery cables, utilizing addition curing and two-component systems.

POWERSIL® 466 A/B is a ready-to-use, two-component system of liquid silicone rubber. It exhibits medium conductivity and offers stable electrical properties along with good mechanical properties. The material is characterized by high elongation at break and low tension set, ensuring flexibility and durability in applications.

POWERSIL® 735 Light Gray A/B is a two-component compound with low viscosity, offering excellent processing properties. The resulting vulcanizates exhibit remarkable resistance to tracking and erosion, along with favorable mechanical properties such as high tear strength. Additionally, they demonstrate excellent dielectric behavior, making it a reliable choice for various applications.

HDK® H30 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H30 finds application as a thickening and thixotropic agent in various industries including coatings, printing inks, adhesives, cosmetics, and others. Additionally, it is utilized as a reinforcing filler in elastomers, specifically silicone-elastomers. Moreover, HDK® H30 acts as a free flow additive in the production of powder coatings.

WACKER® Silicone Paste P is a translucent, vaseline-like paste that has a relatively stiff consistency and provides water repellency. When applied to parts, WACKER® Silicone Paste P offers excellent water repellency, which helps protect against corrosion. The paste also becomes softer when subjected to shear stress or other mechanical stress, such as kneading. This softening effect often makes the processing of the paste easier.

HDK® H15 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H15 is commonly utilized as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics, and other applications. Additionally, it serves as a reinforcing filler in elastomers, particularly silicone elastomers. Moreover, HDK® H15 functions as a free flow additive in the production of technical powders.

HDK® T30 is a hydrophilic, synthetic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. HDK® T30 is a white colloidal powder of high purity. It finds application in inkjet paper, make-up, powder coatings, printing inks, and rheology control.

HDK® N20 is a synthetic, hydrophilic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. This white colloidal powder offers high purity and serves multiple purposes. One of the primary applications of HDK® N20 is as a thickening and thixotropic agent in organic systems such as unsaturated polyesters, coatings, printing inks, adhesives, and cosmetics. Additionally, it functions as a reinforcing filler in elastomers, particularly silicone elastomers.

ELASTOSIL® R 757/60 is a high-consistency silicone rubber (HCR) known for its exceptional resistance to hot air, especially when a heat stabilizer is added. The material exhibits excellent tear resistance, a low compression set, and high elasticity. It is suitable for use in appliance cables that comply with UL 758 and have a temperature rating of 250 oC.

SEMICOSIL® 989/1K is a one-part, ready-to-use silicone rubber that cures through thermal curing. It is non-slumpy and exhibits thixotropic properties, making it easy to handle and apply. This transparent silicone rubber has a medium hardness, providing a balance between flexibility and rigidity. It cures rapidly with heat and offers primerless adhesion to a wide range of substrates.

WACKER SilGel® 613 is a pourable, addition-curing, RTV-2 silicone rubber that undergoes vulcanization at room temperature, resulting in a highly flexible silicone gel. This product offers inherent tack and possesses excellent mechanical damping properties. Furthermore, when used in conjunction with ELASTOSIL® CAT UV, WACKER SilGel® 613 exhibits rapid UV curing at room temperature while maintaining a long pot life.

POWERSIL® 464 A/B is a ready-to-use, two-component system of electrically conductive liquid silicone rubber. It exhibits medium conductivity and possesses good electrical and mechanical properties. It is specifically designed with excellent bonding features on RTV-2 rubber, ensuring stable electrical properties and reliable mechanical performance.

POWERSIL® 415 MH is a high-permittivity, high-consistency silicone rubber specifically designed for the production of refractive field control devices for cable accessories. This ready-to-use material is suitable for all types of molding applications and ensures optimal performance in the production of cable accessories requiring refractive field control.

POWERSIL® GEL C 670 A/B is a two-component, addition-curing silicone mixture that cures at room temperature to a soft silicone gel. The gel is filled with a special lightweight filler, resulting in low density and compressibility. This unique compressibility makes the material suitable for applications in closed instruments without pressure compensation containers.

ELASTOSIL® SOLAR 3210 A/B is a pourable addition-curing RTV-2 silicone rubber specifically designed for coating, lamination, encapsulation, and molding applications. This product undergoes vulcanization at both room temperature and under heat, resulting in a transparent silicone rubber with excellent transmission properties and a moderate hardness. Cured ELASTOSIL® SOLAR 3210 A/B exhibits exceptional long-term stability against weathering, moisture, and UV light. It can withstand constantly changing climatic conditions, UV radiation, and temperatures up to 180 °C (356 °F) without any damage to the silicone elastomer.

ELASTOSIL® LR 3043/40 A/B A/B is a liquid silicone rubber of the ELASTOSIL® LR 3043 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

POWERSIL® 310 MH is a one-component, ready-to-use peroxide curing compound. It cures to form an electrically insulating silicone elastomer with high erosion resistance. This product exhibits very good arc resistance, suitable dielectric properties, and good mechanical properties. POWERSIL® 310 MH is specifically recommended for the production of various types of electrical insulating equipment used in outdoor applications, such as composite insulators, arrester housings, bushings, and more.

WACKER® Primer G 790 is a solution containing reactive siloxanes and silanes dissolved in an organic solvent. This primer can be directly applied to the substrate or can be diluted if needed. As the solvent evaporates and when exposed to atmospheric humidity at room temperature, the primer forms a rigid film that firmly adheres to the substrate. By applying a silicone rubber onto the primed substrate and subsequently vulcanizing it, a strong bond is achieved between the silicone rubber and the substrate.

WACKER® Silicone Paste P 300 is an opaque paste with a medium to soft consistency and slight thixotropic properties. It possesses good electrical properties, including insulation, relative permittivity, and electric strength. Additionally, it exhibits strong adhesion to metals and ceramic materials. When applied as a coating, WACKER® Silicone Paste P 300 provides excellent water repellency, offering a certain level of protection against corrosion. The paste's low viscosity makes it easy to use as an embedding compound, release agent, or lubricant in various applications.

POWERSIL® Paste AP is an opaque to whitish paste with a medium consistency. It exhibits good values for electrical insulation, permittivity, and dielectric strength. Additionally, POWERSIL® Paste AP shows minimal swelling of silicone elastomers it comes in contact with, thanks to the utilization of a special phenyl-silicone oil.

POWERSIL® Fluid TR 50 is a fully synthetic silicone fluid that is nonvolatile and noncorrosive. It possesses a high fire point and exhibits virtually self-extinguishing behavior, significantly reducing the fire hazard compared to conventional transformer fluids. This fluid demonstrates exceptional thermal stability, even in the presence of air, enabling higher thermal utilization when compared to other liquid coolants.

ELASTOSIL® LR 3003/30 R A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time. Its vulcanizates are noted for their high transparency and excellent mechanical properties.

ELASTOSIL® R Plus 4305/80 is a two-component, high-consistency silicone rubber specifically designed for the manufacture of extruded articles. Cured articles made from this addition-curing rubber exhibit excellent transparency and display good to very good mechanical properties. This fast-curing silicone rubber demonstrates good to very good mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-curing materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.

SEMICOSIL® 911 A/B is a pourable, two-part silicone rubber that cures to a soft silicone gel through addition-curing. It has a 1:1 mixing ratio and demonstrates thixotropic behavior. This product offers rapid heat curing and forms a soft gel during vulcanization. SEMICOSIL® 911 A/B has a low volatile and uncured polymer content. It maintains almost constant properties within a wide temperature range, from -40 °C to +180 °C. Additionally, it boasts a low ion content.

ELASTOSIL® R Plus 4360/60 MH is a two-component, high consistency silicone rubber specifically designed for the manufacture of extruded articles. The vulcanizates produced using this silicone rubber exhibit excellent elasticity (rebound resilience) and demonstrate good tear resistance. In comparison to other platinum curing grades like the ELASTOSIL® R plus 4305 series, ELASTOSIL® R Plus 4360/60 MH showcases improved physical resistance.