Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Industrial Additives Functions
- Technologies
Features & Benefits
- Industrial Additives Features
- Specific Features
Hydrophobic
Applications & Uses
- Markets
- Applications
- Applications
- Mineral Renders & Plasters
- Tile Grouts
- Application Details
For typical application fields of VINNAPAS® 3030 H, refer to the section "application". Please discuss additional applications with your WACKER customer representative.
Processing
For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 3030 H with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.
Properties
- Physical Form
- Appearance
- White to light beige powder
- Typical Properties
- Specifications
- Properties
- VINNAPAS® 3030 H is a copolymer powder based on vinyl chloride and ethylene and is dispersible in water.
- VINNAPAS® 3030 H is a polymeric binder and also provides an excellent hydrophobic effect.
- Blended with inorganic binders, the powder will provide very good workability with VINNAPAS® 3030 H have improved adhesion, flexibility, deformability and abrasion resistance.
- As a result of the hydrophobizing resin's special composition and specific production process, mortars modified with VINNAPAS® 3030 H confer extreme strong and lasting water repellency and markedly reduced water absorption of both, silicate and carbonate based mortars.
- VINNAPAS® 3030 H will not have any effect on water-vapor transmission at common dosages.
- VINNAPAS® 3030 H contains a fine mineral filler as an antiblocking agent.
- VINNAPAS® 3030 H is a dispersible polymer powder in the lower Tg range and with a very strong hydrophobic effect. It has no effect on rheology and has excellent hydrophobic properties.
Value | Units | Test Method / Conditions | |
Minimum Film Forming Temperature | 0 | °C | DIN ISO 2115 |
Protective Colloid (Emulsifier System) | Polyvinyl alcohol | — | — |
Value | Units | Test Method / Conditions | |
Ash Content (at 1000°C) | max. 13 | % | Specific Method |
Bulk Density | 400 - 550 | kg/m³ | DIN EN ISO 60 |
Particle Size (min. 400µm) | max. 4 | % | DIN EN ISO 4610 |
Solids Content | min. 98 | % | DIN EN ISO 3251 |
Packaging & Availability
- Country Availability
- Packaging Type
- Regional Availability
- Packaging Information
25 kg paper bags Big Bags or bulk on request.
Storage & Handling
- Storage Information
- During storage, protect the product from contact with moisture.
- Prolonged storage at temperatures above 30°C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking.
- Carefully seal any open containers and store them under suitable conditions.
- We recommend storing the product in a warehouse that provides cool and dry conditions.
- Do not store the product for more than six months, starting from the date at which it was received,