Products

BRUGGOLEN® H3386 is a mixture of copper-complex-based antioxidants and synergists. It is used for the retention of natural polyamide color after conditioning. This product is particularly suitable for the stabilization of polyamides against thermal aging, chemical attack, or aggressive weathering conditions. Powerful long-term stabilization/ natural colors Excellent UV stabilization Very effective dispersion

BRUGGOLEN® P1507 is an effective flow enhancer for polyamides in the form of polymeric granules. Improved flow and outstanding mechanical properties: Outstanding melt flow; significantly longer spiral-flow filling No influence on mechanical properties (modulus of elasticity, tensile strength, elongation, and impact strength is retained) Better processability of glass-fiber-reinforced polyamides Offers advantages for injection-mold processing, such as shorter cycle times, lower energy consumption, use of highly complex part designs Easy to dose and disperse

BRUGGOLEN® Recycling R8895 is a recycling additive for polyolefines. It is used for upcycling Polypropylene from car battery cases: Repair of damage in the polymer chains by a novel chemical system. High-quality recyclates for demanding long-term applications Prolonged retention of mechanical properties during long-term heat aging. Neutralization of acidic contaminations. One-Pack solution stabilizes the recycling process. Bruggolen® R recycling additives improve the polyolefin recycling processes and help recyclers to produce higher-value polyolefine recyclates for long-term applications. For the first time, the new repairing technology allows repairing damages from prior use.

BRUGGOLEN® TP-H1802 is a mixture of secondary aromatic amine-based antioxidants and co-stabilizers in powder form. It provides protection of polyamides against hot oils, fats, and glycols and has the following features: Good long-term stabilization Characteristic brownish-translucent discoloration Not CMR classified, free of DPPD

BRUGGOLEN TP-R2162 is a novel stabilizer package based on partially renewable raw materials for upcycling polyethylene post-industrial and post-consumer waste streams. This product is available in low dust compacted granular product form.Features: Higher quality recyclates via a novel chemical system Enhanced initial mechanical strength of extruded PE films Improved process stability

BRUGGOLEN® H3336 is a mixture of copper complex-based antioxidants and synergists in powder form. BRUGGOLEN® H3336 provides highly efficient heat stabilization of polyamides up to 180°C, which leads to effective processing stabilization against polymer degradation. It gives a characteristic bluish discoloration after conditioning. Features:Cost-effectiveExcellent dispersionHigh extraction resistance, no plate-outSuited for E&E applicationsCharacteristic:Bluish discoloration after conditioning

BRUGGOLEN® TP-H1804 is a copper-based heat stabilizer package with synergists for use in aliphatic polyamides. This product is available in granular form. It is a very effective protection agent and antioxidant against premature fatigue of the mechanical properties and embrittlement of the finished parts under long-term stress, both in unreinforced and glass-fiber reinforced or mineral-filled aliphatic polyamides up to 190°C.

BRUGGOLEN® TP-R2090 is our recycling additive for polyolefins Bruggolen® R recycling additives improve the polyolefin recycling processes and help recyclers to produce higher value polyolefine recyclates for long term applications. For the first time the new repairing technology allows to repair damages from prior use. BRUGGOLEN® TP-R2090 for Upcycling of post-industrial and post-consumer polypropylene waste streams: Repair of damage in the polymer chains by novel chemical system. High quality recyclates for demanding long term applications Prolonged retention of mechanical properties during long term heat aging. One-Pack solution stabilizes the recycling process

BRUGGOLEN® M1417 is our modifier for both chain build-up and chain disintegration. For example, with its “chain shortener”, the molecular weight of highly viscous polyamide wastes can be transformed into high-performance injection molding types, whose mechanical properties correspond to those of off-the-shelf new injection molded types of the same viscosity. Cost advantages included. BRUGGOLEN® M1417 - Chain Breaking Agent for the recycling of High Viscous Polyamide Waste Controlled and reproducible reduction of molecular weight: Exact adjustment of the relative viscosity to specified target values Upcycling to injection molding grades Generating flow properties and mechanical performance comparable to that of prime material Allowing cost advantages through the usability of scrap and waste material due to the reuse of waste material enabling recycling of cast nylon waste

BRUGGOLEN® P22 is a highly efficient nucleating agent for polyamides. The addition of Bruggolen® P22 to the polymer melt leads to fine particles which induce a very fine and homogeneous crystalline structure.FeaturesIncreases crystallinityReduces cycle time during injection moldingImproves dimensional stability - significant reduction of warping in GF-reinforced compoundsImproves mechanical properties (tensile strength, stiffness, flexural modulus, etc.)Increases heat distortion temperatureNon-volatile; non-extractable

BRUGGOLEN® H320 is a synergistic mixture of copper compounds, halides, and lubricants in powder form. This copper, salt-based antioxidant is in the form of powder and it provides excellent long-term protection of polyamides against embrittlement, powerful protection against premature fatigue and high temperatures up to 180°C.Features: Powerful long-term protection Excellent quality and homogeneity via specific production know-howCharacteristic:Bluish or greenish discoloration after conditioning

BRUGGOLEN® H325 is a synergistic composition of cuprous and halogen compounds along with an effective lubricant in the form of compacted granules. It is a very effective antioxidant and is a heat-aging protection agent for use in unfilled and glass-reinforced polyamides.

BRUGGOLEN® H324 is a heat stabilizer and antioxidant which protects high performance polyamides, preserving strength, stiffness, and dimensional stability from damage caused by heat, weather etc.It is a copper iodide based heat stabilizer /antioxidant specially suited for filled and unfilled polyamides. After conditioning of the polyamide BRUGGOLEN® H324 generates a typical discoloration known from copper iodide based antioxidants.Features:Powerful long-term protectionExcellent quality and homogeneity via specific production know-howCharacteristic:Bluish or greenish discoloration after conditioning

BRUGGOLEN® H321 is a blend of copper compounds, halides, and lubricants in the form of compacted granules. It neutralizes the harmful effects of high temperatures on polyamides. It is a classic copper, salt-based heat stabilizer that works to a temperature of 180°C by reacting with the degradation products that are formed during thermal processing or exposure to high temperatures, neutralizing their harmful effects and helping to preserve the integrity of the polymer.

BRUGGOLEN® P252 is a synergistic mixture of various nucleating and lubricating substances. It is our highly-efficient nucleating agent for polyesters. Reduction of cycle time during injection molding Improved dimensional stability - significant reduction of warping in GD-reinforced compounds Improves mechanical properties (tensile strength, stiffness, etc.) Increases heat distortion temperature Non-volatile Non-extractable

BRUGGOLEN® H164 is a synergistic mixture of sterically hindered phenolic antioxidants and phosphonates in powder form. Our phenol-based stabilizer BRUGGOLEN® H164 is reaching a long-term protection of polyamides against heat aging for technical applications such as:Non-discoloringExcellent in glass fiber reinforced or mineral-filled polyamides

BRUGGOLEN® TP-H2062 is a halogen and metal-free heat stabilizer for polyamides in the form of polymeric granules. In E&E applications, it provides:Improved retention of mechanical performance under heat compared to standard phosphite/phenolic-based stabilizersTensile strength retention >50% for 2500h at 150°CMaintains comparative tracking index (CTI) up to 600VAllows E&E applications at elevated temperaturesHalogen and metal-free heat stabilizer in granular product form