Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Labeling Claims
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Electrical Properties
- Processing Information (Injection Molding)
Value | Units | Test Method / Conditions | |
Flexural Modulus | 11900.0 | MPa | ISO 178 |
Flexural Strength | 180.0 | MPa | ISO 178 |
Tensile Modulus | 13900.0 | MPa | ISO 527 |
Flexural Deflection (Maximum Force) | 1.7 | % | ISO 178 |
Tensile Strength at Break | 135.0 | MPa | ISO 527 |
Tensile Elongation at Break | 1.3 | % | ISO 527 |
Impact Strength (Charpy, at 23°C) | 20.0 | kJ/m² | ISO 179/1eU |
Value | Units | Test Method / Conditions | |
Density | 1490.0 | kg/m³ | ISO 1183 |
Value | Units | Test Method / Conditions | |
HDT / A (1.8 MPa) | 273.0 | °C | ISO 75-1/-2 |
DSC (Melt Point) | 280.0 | °C | ISO 11357 |
Value | Units | Test Method / Conditions | |
Moisture Content | max. 0.02 | % | - |
Value | Units | Test Method / Conditions | |
Surface Resistance | max. 150 | Ohm | IEC 62631-3-2 |
Value | Units | Test Method / Conditions | |
Mould Temperature | min. 140 | °C | - |
Melt Temperature | 320 - 340 | °C | - |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- In a dry air (dessiccant) dryer 130-140 °C for 2-4 h
- Dependant on moisture content
Storage & Handling
- Storage Conditions
Store in dry, protected from light.