Products

ELASTOSIL® R 573/70 A/B is a two-component, electrically conductive HCR silicone rubber for the manufacture of electrically conductive products. This product is an addition-cured electrically conductive HCR silicone rubber that shows a low volume resistivity. This product can be used within a temperature range of -55 °C to +210 °C.

WACKER® Primer G 790 Toluene Free is a solution of reactive siloxanes and silanes in an organic solvent. It is specifically formulated to be free of toluene and other aromatic solvents. The primer can be applied directly to the substrate or diluted if desired. As the solvent evaporates and when exposed to ambient humidity, the primer forms a rigid film that firmly adheres to the substrate. By applying a silicone rubber onto the primed substrate and subsequently vulcanizing it, a strong bond is achieved between the silicone rubber and the substrate.

POWERSIL® XLR® 630 A/B is a two-component silicone compound with excellent processing properties and low viscosity. It is designed for easy handling and application. The vulcanized rubber exhibits good mechanical properties and excellent dielectric behavior. It is a ready-to-use, two-component system that provides the desired characteristics for various applications.

POWERSIL® 3525 MH silicone rubber is a one-component, ready-to-use, addition-curing compound that produces an electrically insulating, highly erosion-resistant silicone elastomer upon curing. Compared to conventional silicone rubber, it shows fast curing, with curing time being reduced by 30 to 50% depending on wall thickness and available machinery and runner system. No peroxide decomposition products are released during the curing process.

POWERSIL® GEL FC A/B is a pourable, two-component silicone mixture that cures at room temperature to form a soft silicone gel. This product exhibits a very fast curing behavior, allowing for quick processing times. The resulting vulcanizate is transparent and possesses excellent mechanical damping properties, making it suitable for applications requiring vibration absorption. Furthermore, it is a non-bleeding gel, ensuring its stability and reliability.

ELASTOSIL® AUX G 800 is a solution of reactive siloxanes and silanes in an organic solvent. The primer composition can be applied to the substrate as-is or diluted. During evaporation of the solvent and on exposure to atmospheric humidity at ambient temperature, a rigid primer film is formed that firmly adheres to the substrate. Application of silicone rubber onto the primed substrate and subsequent vulcanization will then result in a tight bond between the silicone rubber and the substrate.

POWERSIL® 3100 MH silicone rubber is a one-component, addition-curing compound that is ready to use and cures to an electrically insulating, highly erosion-resistant silicone elastomer. This product offers comparatively fast curing times compared to conventional silicone rubber, reducing cure times by 30-50%, depending on the wall thickness of the application, as well as the available machinery and runner system. Furthermore, no peroxide decomposition products are released during the curing process, reducing any potential hazards. The curing system also eliminates the risk of curing inhibition by oxygen.

ELASTOSIL® R Plus 4305/80 is a two-component, high-consistency silicone rubber specifically designed for the manufacture of extruded articles. Cured articles made from this addition-curing rubber exhibit excellent transparency and display good to very good mechanical properties. This fast-curing silicone rubber demonstrates good to very good mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-curing materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.

WACKER® Primer G 790 is a solution containing reactive siloxanes and silanes dissolved in an organic solvent. This primer can be directly applied to the substrate or can be diluted if needed. As the solvent evaporates and when exposed to atmospheric humidity at room temperature, the primer forms a rigid film that firmly adheres to the substrate. By applying a silicone rubber onto the primed substrate and subsequently vulcanizing it, a strong bond is achieved between the silicone rubber and the substrate.

ELASTOSIL® R Plus 4305/70 is a two-component, high-consistency silicone rubber specifically developed for the manufacture of extruded articles. Cured articles made from this addition-curing rubber exhibit excellent transparency and demonstrate good to very good mechanical properties. This fast-curing silicone rubber displays good to very good mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-curing materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.

POWERSIL® 600 A/B is a pourable, addition-curing, two-component silicone rubber that cures at room temperature. It is specifically designed for casting applications and forms soft products with high mechanical strength. This ready-to-use, two-component system is very easy to process thanks to its low viscosity. It offers excellent dielectric properties and is best suited for outdoor applications due to its UV and weathering resistance, as well as its excellent hydrophobic properties.

WACKER® Silicone Paste P 300 is an opaque paste with a medium to soft consistency and slight thixotropic properties. It possesses good electrical properties, including insulation, relative permittivity, and electric strength. Additionally, it exhibits strong adhesion to metals and ceramic materials. When applied as a coating, WACKER® Silicone Paste P 300 provides excellent water repellency, offering a certain level of protection against corrosion. The paste's low viscosity makes it easy to use as an embedding compound, release agent, or lubricant in various applications.

ELASTOSIL® E209 is a one-component silicone rubber with low viscosity that cures at room temperature under the influence of atmospheric humidity. It has a flowable consistency and utilizes an acetoxy-cure mechanism. ELASTOSIL E209 demonstrates good primerless adhesion to a variety of substrates. For optimal results in specific applications, it is recommended to conduct preliminary tests to optimize the conditions.

POWERSIL® 311 MH is a one-component, ready-to-use peroxide curing compound. It cures to form an electrically insulating silicone elastomer with high erosion resistance. This product is specifically recommended for the production of electrical insulating equipment used outdoors, such as composite insulators, arrester housings, bushings, and more. It is particularly suitable for extruded parts that are cured in the air.

POWERSIL® GEL A/B is a pourable, two-component silicone mixture that cures at room temperature to form a transparent, very soft silicone gel. The resulting vulcanizate exhibits excellent mechanical damping properties, providing effective vibration absorption. Additionally, this gel is non-bleeding, ensuring its stability and integrity over time.

POWERSIL® 310 MH is a one-component, ready-to-use peroxide curing compound. It cures to form an electrically insulating silicone elastomer with high erosion resistance. This product exhibits very good arc resistance, suitable dielectric properties, and good mechanical properties. POWERSIL® 310 MH is specifically recommended for the production of various types of electrical insulating equipment used in outdoor applications, such as composite insulators, arrester housings, bushings, and more.

ELASTOSIL® R 573/50 A/B is a two-component, electrically conductive HCR silicone rubber for the manufacture of electrically conductive products. This product is an addition-cured electrically conductive HCR silicone rubber that shows a low volume resistivity. This product can be used within a temperature range of -55 °C to +210 °C.

POWERSIL® GEL C 670 A/B is a two-component, addition-curing silicone mixture that cures at room temperature to a soft silicone gel. The gel is filled with a special lightweight filler, resulting in low density and compressibility. This unique compressibility makes the material suitable for applications in closed instruments without pressure compensation containers.

WACKER SilGel® 613 is a pourable, addition-curing, RTV-2 silicone rubber that undergoes vulcanization at room temperature, resulting in a highly flexible silicone gel. This product offers inherent tack and possesses excellent mechanical damping properties. Furthermore, when used in conjunction with ELASTOSIL® CAT UV, WACKER SilGel® 613 exhibits rapid UV curing at room temperature while maintaining a long pot life.

SEMICOSIL® 911 A/B is a pourable, two-part silicone rubber that cures to a soft silicone gel through addition-curing. It has a 1:1 mixing ratio and demonstrates thixotropic behavior. This product offers rapid heat curing and forms a soft gel during vulcanization. SEMICOSIL® 911 A/B has a low volatile and uncured polymer content. It maintains almost constant properties within a wide temperature range, from -40 °C to +180 °C. Additionally, it boasts a low ion content.

POWERSIL® 190 MH is a one-component silicone rubber compound that is peroxide-curing and ready to use. It is specifically formulated for high voltage applications. When used to extrude or mold insulators, POWERSIL® 190 MH provides excellent resistance to arcing and tracking. This enhanced resistance helps improve the reliability of electrical systems and reduces power interruptions.

POWERSIL® 3500 MH is a high-temperature vulcanizing (HTV) silicone rubber, used as an addition-curing one-component compound for the production of press-cured articles. The resulting vulcanized products are resistant to tracking and display good to very good mechanical properties. The compound does not release any peroxide split products during cure or post-cure processes. The curing system is significantly faster compared to peroxide-curing materials; cure time can be reduced by 30-50%, depending on the wall thickness.

ELASTOSIL® R Plus 5305/70 is a platinum-catalyzed, addition-curing, two-part silicone rubber specifically designed for the manufacturing of extruded articles. Cured articles exhibit excellent transparency and very good mechanical properties. This silicone rubber is suitable for applications such as ignition and battery cables, utilizing addition curing and two-component systems.

WACKER® Silicone Paste P 250 is an opaque paste with a medium consistency and slight thixotropic properties. It possesses good electrical properties, including insulation, relative permittivity, and electric strength. Additionally, it exhibits strong adhesion to metals and ceramic materials. When applied as a coating, WACKER® Silicone Paste P 250 provides excellent water repellency, offering a certain level of protection against corrosion. The paste's low viscosity makes it easy to use as an embedding compound, release agent, or lubricant in various applications.

SEMICOSIL® 989/1K is a one-part, ready-to-use silicone rubber that cures through thermal curing. It is non-slumpy and exhibits thixotropic properties, making it easy to handle and apply. This transparent silicone rubber has a medium hardness, providing a balance between flexibility and rigidity. It cures rapidly with heat and offers primerless adhesion to a wide range of substrates.

WACKER® Silicone Paste P is a translucent, vaseline-like paste that has a relatively stiff consistency and provides water repellency. When applied to parts, WACKER® Silicone Paste P offers excellent water repellency, which helps protect against corrosion. The paste also becomes softer when subjected to shear stress or other mechanical stress, such as kneading. This softening effect often makes the processing of the paste easier.

POWERSIL® Fluid TR 50 is a fully synthetic silicone fluid that is nonvolatile and noncorrosive. It possesses a high fire point and exhibits virtually self-extinguishing behavior, significantly reducing the fire hazard compared to conventional transformer fluids. This fluid demonstrates exceptional thermal stability, even in the presence of air, enabling higher thermal utilization when compared to other liquid coolants.

WACKER® Primer G 791 A/B is a two-component, addition-curing primering system that is diluted in an organic solvent. The primer is applied to the substrate, and upon curing, it forms a primer film that firmly adheres to the substrate. Subsequently, applying a silicone rubber onto the primed substrate and undergoing vulcanization will create a tight bond between the silicone rubber and the substrate.

SEMICOSIL® 949 UV A/B is a pourable, addition-curing, two-part silicone rubber with low viscosity. This product cures extremely fast when exposed to UV light, resulting in a soft silicone elastomer. SEMICOSIL® 949 UV A has a mixing ratio of 10:1 for its two parts and exhibits low viscosity, making it easy to handle and process. It offers the advantage of extremely fast curing at room temperature after UV activation. The cured elastomer has low hardness (Shore 00). Additionally, SEMICOSIL® 949 UV A contains a UV tracer, providing process control options during application.

ELASTOSIL® CAT UV is a room-temperature curing silicone rubber (RTV-2) that can be used as an organometallic catalyst for addition-curing two-part silicone rubber grades. This versatile product enables fast UV curing at room temperature while maintaining a long pot life.

SEMICOSIL® 942 UV A/B is a sprayable, addition-curing, two-part silicone rubber with low viscosity. This product cures extremely fast when exposed to UV light, resulting in a soft conformal coating. SEMICOSIL® 942 UV A/B exhibits low viscosity and shear-thinning properties, making it suitable for spray applications. It offers the advantage of extremely fast curing at room temperature after UV activation, as well as the ability for shadow curing. Additionally, it contains a UV tracer, providing process control options during application.

SEMICOSIL® 950 UV B is used in combination with SEMICOSIL® 949 UV A as a sprayable, addition-curing, 2-part silicone rubber of low viscosity that cures extremely fast after activation by UV light exposure to a soft silicone elastomer. The applied mixture offers a process control option by UV light (it contains a UV tracer).

ELASTOSIL® R 510/60 S is a high-consistency silicone rubber (HCR) that cures with peroxide and is specifically designed for manufacturing silicone-insulated cables and wires. It offers excellent performance within a wide temperature range of -55°C to +225°C. This product finds applications in various areas, including cables for household appliances, ignition and battery cables, as well as measurement and control cables.

ELASTOSIL® R 510/70 S is a peroxide-crosslinking, high-consistency silicone rubber (HCR) that is specifically designed for manufacturing silicone-insulated cables and wires. It offers excellent performance within a wide temperature range of -55°C to +225°C. This product finds applications in various areas, including cables for household appliances, ignition and battery cables, as well as measurement and control cables.

ELASTOSIL® R 570/70 OH is a peroxide-curing high-consistency silicone rubber (HCR) for the manufacture of electrically conductive products. This product is recommended to be used in control elements for cable accessories, contacts and keypads, interconnectors, electrically conductive rollers, and electrodes.